HVAC School - For Techs, By Techs

Latest Episodes:

Business Round Table - Tersh, Peterson, Holt Aug 03, 2023

Show notes

This podcast episode contains some of the questions and topics from the Business Round Table at the 4th Annual HVACR Training Symposium. Panelists include Tersh Blissett, Luke Peterson, and Andy Holt.

One of the most critical parts of HVAC business ownership is knowing when to grow your business (i.e., hiring more techs and incorporating standalone maintenance and install departments). Ultimately, we need to think about how many service calls we're assigning to each technician per day and how many customers we have to turn down due to a busy schedule. Getting family members involved in the business can also have a range of positive and negative effects on a business.

Delegating is another important skill that can help you run an HVAC business smoothly and focus on ownership and management over your day-to-day tasks. You need to understand your business's core processes but can delegate tasks that take time away from developing your business.

When it comes to economic issues like inflation, we need to be looking at our own costs and competitors' costs to set our prices and pay our employees appropriately for the economic climate. We can use indicators like the consumer price index to assist with pricing and setting pay rates.

Tersh, Luke, Andy, and Bryan also discuss:

Key performance indicators (KPIs)
Maintenance agreement frequency
Talent acquisition vs. vetting
Attracting vs. poaching employees
Merit-based raises vs. cost-of-living raises
Working "in" the business vs. working "on" the business
Hiring people to handle day-to-day tasks
Using Loom or similar video instruction software
Support systems in your interpersonal relationships
Motivation for starting a business
Starting a business from scratch vs. acquisitions
Explaining the difference between bids and online retail prices

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Cap Tubes and Flow Facts - Short #171 Aug 01, 2023

Show notes

In this short podcast, Bryan goes over some information about cap tubes (capillary tubes) and flow facts.

Cap tubes are metering devices; they're long tubes with small diameters, and their flow rates are dictated by the tubing diameter size and tube length. Pistons and TXVs are some of the most common metering devices in residential HVAC, and flow restriction doesn't just happen at the metering device; distributors also contribute to the pressure drop and act like small capillary tubes in addition to the metering device. Older units, simple refrigerators, and window units are more likely to have capillary tubes as metering devices, as cap tubes are an easy and versatile use of small-gauge tubing.

The diameter is the primary factor that influences the flow rate, and length is usually secondary. However, longer tubes cause the fluids to encounter more resistance (in the form of friction) as they flow from one end of the tube to the other; the longer the tube, the lower the flow rate. Longer tubes also cause the fluid velocity to decrease more than a short tube.

When you have long runs of small-diameter tubing, you can replace a few sections with larger-diameter tubing to improve the flow rate. Sometimes, the ends of cap tubes are in hard-to-reach places, so replacing middle sections with larger-diameter tubing will still help decrease the static pressure and friction in the tubing.

Oil traps and risers may be smaller than other areas of tubing, and they have a larger pressure drop and more friction associated with them. (However, the smaller tubing also increases the fluid velocity.) The same principle applies to 1/4" vs. larger-diameter vacuum hoses.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Filter Driers and System Cleanup w/ Copeland Jul 27, 2023

Show notes

Jim Fultz and Jim Hagl from Copeland join the podcast to talk about filter driers and system cleanup. Filter driers come in many types and sizes; they typically go on the liquid line (bi-flow filter driers are used on heat pumps), but suction line filter driers also exist.

Copeland's liquid line filter drier models include the EK (premium), BSL (smaller diameter), BOK (with HH desiccant to assist with burnout cleanup), and CU (copper spun). Bi-flow filter driers in Copeland's lineup include the BFK and BSB categories. These liquid line filter driers protect the metering device and should typically be installed as close to the metering device as possible (with some exceptions for heat pump startups in heating mode). These filter driers typically need to be replaced anytime the system is opened for service, the pressure drop across the drier exceeds 3 PSI, or the system is wet.

Suction line filter driers in Copeland's lineup include the ASD, SFD, and CSFD models, all of which come in different shapes and sizes for varying applications. The ASK suction line filter drier has activated carbon to assist with burnout cleanup. When used to assist with contamination cleanup, suction line filter driers must be taken out of the system within a few days.

Jim F., Jim H., and Bryan also discuss:

Copeland and Emerson brand realignment
Filtration data
Myths about smaller-diameter filter driers
Copper-spun drier uses and applications
Ideal vs. accessible suction filter drier placement
Desiccant considerations
Filter drier selection best practices
Moisture indicators
Restricted filter driers
Filter drier sizing and system charge
Bi-flow driers in straight-cool systems
Dealing with factory-installed filter driers
Product names and suffixes
Burnouts and oil
Flowing nitrogen while brazing
Additives and flushes

Check out Copeland's filter driers at https://hvacrschool.com/copeland-driers.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

So... What Do You Do? - Unconformed - Short #170 Jul 25, 2023

Show notes

In this short episode, Bryan goes over the fourth chapter of his new book, Unconformed. The chapter is called "So... What Do You Do?"

Parents always want to be proud of their children, but it seems as though children are more proud of children who attend college than take up apprenticeships. However, these feelings largely seep in due to peer expectations; we want our children to measure up to our friends' standards or success, not necessarily our own. Parents are also less likely to encourage their children to get into the trades and value the time and expertise of tradespeople.

All jobs, even less prestigious jobs, matter and have a purpose. Society tends to devalue tradespeople and manual laborers, but those jobs do a great service to society. Nevertheless, the competitive drive between parents and our fear of failure makes us fall into these mindsets where we devalue manual labor. The media and family members also trap us in these expectations.

Society runs on the ability of people to solve problems and innovate, which means that blue-collar work is necessary for society to function. Not to mention, popular media and DIY culture have also brought attention to the artistry of the skilled trades. These positive changes are important to the perception of blue-collar work, and we can accept (and encourage) a child's choice to find purpose in the skilled trades, not just blindly seek happiness.

Bryan also covers:

Networking
Expectations vs. standards
The pitfalls of happiness
The merits of working with our hands

You can purchase Unconformed on Amazon's website HERE.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Pipefitting Best Practices Jul 20, 2023

Show notes

This podcast is based on a Kalos meeting about pipefitting best practices, particularly in commercial refrigeration applications. It begins with a few words about quality workmanship by the Kalos founder and CEO, Robert Orr.

Pipefitting consists of repairs and joining metals; when joining metals, we need to liquify the alloy and draw it into the joint via capillary action. When pipefitting, oxygen can present some problems by coating the inside of the pipe with oxides that can contaminate the system. We can reduce the likelihood of oxide formation by flowing nitrogen while brazing; purging nitrogen displaces the oxygen in the lines before brazing, and flowing keeps oxygen out during the brazing process.

Tip selection will be based on the piping diameter; tips that are too small won't adequately heat the pipe, and tips that are too large will consume too much fuel. You'll also need to leak-check your torch tanks and ensure that you have the appropriate ratio of oxygen to acetylene by aiming for a neutral flame rather than a carburizing or oxidizing flame.

After brazing, we need to perform a nitrogen pressure test to ensure that the system is leak-free. Then, once the pressure test is passed, we should evacuate the system to keep the system clean, dry, and tight.

Bryan, Matthew, Roman, and Nathan also cover:

Brazing vs. soldering
Properties of base metals
Alloy properties and appropriate uses
Mineral oil vs. POE oil and cupric oxide
Safety practices and PPE
Preparing copper (sealing, deburring, etc.)
Valve seating
Penetration and the gaps between surfaces
Base metal temperature indications
Advantages of nitrogen for pressure testing
Vacuum pump best practices
Micron gauges

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Filter Driers and System Protection - Short #169 Jul 18, 2023

Show notes

In this short episode, Bryan talks about filter driers and their important role in HVAC/R system protection, especially in accordance with Copeland's (formerly Emerson's) AE24-1105 R5.

We can really start keeping our systems contaminant-free by handling tubing properly, purging and flowing nitrogen, and keeping copper shavings out of the tubing when deburring or reaming. Suction and liquid filter driers protect the system during operation and are designed for specific purposes.

We typically don't install suction filter driers in residential systems unless we're fixing a system with compressor burnout or acid contamination; in those cases, we also want to make sure we replace accumulators and clean out the line set as well as we possibly can. Commercial refrigeration tends to have more rigorous contamination prevention protocols, including testing oil for acid and installing suction filter driers in everyday operation, due to the use of multiple compressors in a single system.

However, suction driers are recommended in ALL applications per AE24-1105. In many cases, we don't install them in systems because they can create a significant pressure drop in the suction line and damage the compressor, but suction filter driers can provide a net positive effect if we monitor them. We should install suction filter driers as close to the compressor(s) as possible, and we should cut them out when we need to remove them, not unsweat them.

Bryan also covers:

Liquid line filter drier placement
Pressure drop across filter driers and replacement thresholds
Burnout cleanup procedures
Filter drier sizing
Refrigerant additives
Motor burnout in hermetic refrigerant-cooled compressors
Electrical best practices

For more information about filter drier selection by model number, visit https://hvacrschool.com/copeland-driers.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Alex Meaney - HVAC Design Backwards, Forwards, and In Between Jul 13, 2023

Show notes

This podcast episode is one of Alex Meaney's HVACR Training Symposium presentations: HVAC Design Backwards, Forwards, and In Between.

Load calculation factors in all three means of heat transfer: conduction, convection, and radiation. It doesn't directly tell you the tonnage; it just tells you how many BTUs (sensible and latent) are entering or leaving a structure. When designing systems after doing load calculations, we need to be mindful of industry standards and their pitfalls, as well as the climate conditions and the difficulty of obtaining manufacturer data.

Equipment selection by tonnage is only part of the picture when it comes to HVAC design; we also need to factor in airflow and duct design, especially duct sizing. However, many rules of thumb and poorly explained terms are counterproductive to a thorough understanding of HVAC design. In some cases, the best way to design a system may seem "backward," especially when starting with blower selection instead of ductwork.

Duct design is particularly difficult, especially when software identifies several problems with designs that seemed to look good on paper. However, the software points out areas where you can adjust the duct size and manage restrictions to allow the fan to do its job without being derated by friction.

Alex also covers:

Insulation and efficiency ratings
CLTD Groups
Tricky radiant gains and losses
The relationship between BTUs and tons
AHRI ratings
Shortcomings of Ductulators in duct design education
Pressure vs. friction in ductwork
Static pressure vs. velocity pressure
Measuring friction with pressure
Regulations vs. reality
Furnace static pressure range
Differences between commercial and residential duct design
Oversized and under-ducted systems
Variable-capacity systems
ACCA manuals and tables

Check out Alex Meaney's consultation business at https://www.meanhvac.com/.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Santa Fe Panel with Andy Ask and Ken Gehring Jul 06, 2023

Show notes

This podcast is the Santa Fe Panel from the 4th Annual HVACR Training Symposium. The panel focused on dehumidification, was moderated by Nikki Krueger, and featured Andy Ask and Ken Gehring.

"Matchmaking" a residence to the climate requires us to design and install equipment that keeps occupants healthy and comfortable. HVAC contractors need to focus on the dew points, especially as they remain high at night and in the shoulder seasons. Humidity loads tend to hold steady (even peak dew points), while sensible loads increase and drop, making it difficult to control latent heat loads the same way we control sensible loads.

The equipment will typically be less efficient if you focus on long runtimes to remove latent heat under partial load conditions and maintain 50% humidity. Dehumidifier efficiency is determined on a pint per kilowatt basis, but a constantly running dehumidifier will do its job a lot more efficiently than one that starts and stops regularly.

The dehumidifier adds heat to the house and should only come on when the HVAC system is having trouble maintaining the desired humidity load; the dehumidifier has a reheat effect, but the HVAC system will need to deal with the increased heat load. When you add a whole-house dehumidifier, adding a fresh air ventilation component is highly recommended.

Nikki, Ken, and Andy also cover:

Infiltration and exfiltration
Variable-speed technology and supplemental dehumidification
Fresh air ventilation
Air conditioner vs. dehumidifier latent heat removal
Net zero HVAC, electrification, and decarbonization initiatives
Air mixing in the ductwork
Standalone dehumidifiers
Vapor pressure and buoyancy
Sizing for peak dehumidification loads
Dehumidifier supply and return tie-ins
Static pressure and "injection" dehumidification
Fan cycling

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Where to Place the Micron Gauge - Short #168 Jul 04, 2023

Show notes

In this short podcast, Bryan talks about where to place the micron gauge during evacuation and how to think about micron gauge positioning.

Evacuation (deep vacuum) doesn't remove solid contaminants, and vaporizing liquid water is a time-consuming process; its main purpose is to remove water vapor, air, and nitrogen gases from the HVAC/R system. When you pull down below 500 microns and hold that pressure, we can make sure we have a clean, dry, and tight (leak-free) system. As we started using R-410A and POE oil, water in the system became a much bigger issue than it was with mineral oil (it was never to have water in the system, but it breaks down POE oil).

Before we start pulling a vacuum on the system, we need to attach our micron gauge to the pump while it's isolated to make sure the pump is working. A modern vacuum pump should pull down below 100 microns in 30-60 seconds; if your pump can't pull down to 100 microns in under a minute when isolated, then you'll want to change the oil (possibly multiple times). Be sure to change the oil regularly and store it properly.

When you pull a vacuum on a system, you'll want to attach your micron gauge as far away from the pump as possible to get an accurate indicator of your vacuum. Use core remover tools to isolate the system and make sure the far side of the system is brought below 500 microns during evacuation. The time it takes to pull down a system and the time you'll hold the vacuum will depend on your application (residential vs. commercial).

Check out Review of Vacuum for Service Engineers (revised by Jim Bergmann and Bryan Orr, 2020) at https://www.trutechtools.com/accutools-review-of-vacuum-for-service-engineers.html.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

From Resi Tech to Industry Leading Refrigeration Trainer w/ Brett Wetzel Jun 29, 2023

Show notes

Brett Wetzel joins the podcast to talk about his journey from resi tech to industry-leading refrigeration trainer.

Brett is best known for his educational content, but he is also the manager of technical troubleshooting and training at CoolSys. The skills gap is widening, and CoolSys was inspired to create a solution to that problem. Brett's goal is to offer training that provides education and a sense of community all at once. Since he likes to keep his training simple and establish a solid foundation for his students, one of Brett's favorite training practices includes going over a system's P&ID diagram with his students before even looking at it. He focuses on classroom engagement and keeping trainees interested.

Brett does regional training sessions and has written technical documentation to help technicians. As he has shifted from a field role to a full-time educator role, he has noticed that he has had more time at home. CoolSys focuses on commercial and industrial refrigeration, including system components, racks, and controls.

The transition from residential HVAC to commercial HVAC and refrigeration requires an inquisitive mind and a drive to keep learning. Independent learners tend to do particularly well. There is an additional step that people will have to take when they move from fieldwork to education; communication skills and an ability to keep students engaged are crucial.

Brett and Bryan also cover:

CoolSys's training plans
First lessons for refrigeration and HVAC trainees
Keep It Simple, Stupid (KISS) in training
New technologies and energy efficiency in CoolSys training
Reading and independent learning
The ever-changing nature of the HVAC/R trade
Mentorship
Practical skills and training
CoolSys technical library

Check out CoolSys at https://coolsys.com/ to learn about the company and some job opportunities. You can also email Brett at bwetzel@coolsys.com or listen to the Advanced Refrigeration Podcast (YouTube channel: https://www.youtube.com/@advancedrefrigerationpodca9389).

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Our TOPPODCAST Picks

Follow Us

Stay Connected

HVAC School – For Techs, By Techs

Related Podcasts

Links

Stay Connected