Welding Tips and Tricks Podcast

Latest Episodes:

Anodized Aluminum Dec 02, 2019

Show notes

Here is your First Listen to episode 169. For this weeks topic we went with a requested topic from our Live recording at Fabtech and we have also been asked to talk about this many times before. This topic is Tig welding Anodized Aluminum. There are many ways to weld this but we talk about the ways we have done it before in the past. Hope you can get some good tips from this one and when an anodized job comes across you bench you'll feel more comfertable of where to start. Enjoy!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks! Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Stubby 6 Quitting Nov 27, 2019

Show notes

Thank you for listening to this Stubby episode of the Welding Tips and Tricks Podcast! For this weeks Stubby Jonathan answers a question about Quitting. This is one that all of us have had to ask ourselves before sometimes more than once. We hope that this Stubby might help you answer your questions abut quitting.

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Fabtech 2019 Review Nov 25, 2019

Show notes

Thank you for listening to the Welding Tips and Tricks Podcast! For this weeks episode we review Fabtech 2019! Now that the show is over we wanted to chat about what all we saw this year, who we met, what we bought, and more. We hope you were able to make it and if not start planning to go to Fabtech 2020 Now!

Stubby 5 Welding Tests in School Nov 20, 2019

Show notes

Thank you for listening to this weeks Stubby Episode! This question is one we get often and thought it would be a good one to include for all to hear. If you're in school for welding be sure to listen up!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Fabtech 2019 Live Nov 18, 2019

Show notes

Thank you for listening to the Welding Tips and Tricks Podcast! For this weeks episode we're posting our Live recording from Fabtech 2019. We had a great time and was amazed how many people took time out of there Fabtech to come see us talk and answer their questions! The audio quality isn't the best but better than we thought it would be. Hope you enjoy this Live recording and have a great week!

Stubby 4 Reading Blueprints and Welding Symbols Nov 13, 2019

Show notes

This weeks Stubby is about needing to be able to Read Blueprints and understand Welding Symbols? This question comes from Charles Price who is a welding instructor at the Mayfield/Graves County Area Technology Center in Mayfield, KY. Charles sent us a list of very common questions he gets from his students. We hope you enjoy this short episode and look forward to hearing your questions!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products! If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Weld Like a Girl aka Michelle Villalobos Nov 11, 2019

Show notes

Thank you for listening to Episode 166 of the Welding Tips and Tricks Podcast! For this episode our guest is Weld Like a Girl aka Michelle Villalobos. We had a great time chatting with Michelle hearing how she got into the trade along with many other things. When running your own business you wear many hats and Michelle wears them all along with looking for new hats at the same time. If you're wanting to start a business you'll want to take some notes! Enjoy!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks! We'd like to Thank our Sponsors for this Episode! Clash of the Grinders by 3M Thank you to Clash of the Grinders for sponsoring this episode! Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019. If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube! Be sure to check out s.3m.com/cotg for up to date information! We would also like to Thank Bugo Systems for sponsoring this episode! For all your mechanized welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units! Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Where can you Find Michelle? On Instagram @weldlikeagirl Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Stubby 3 Job Ad Wording Nov 06, 2019

Show notes

Thank you for listening to Stubby episode 3. This Stubby is about Job Ads. What to look for and what they might mean in their ads. Also, Jody touches on a few good tips on what to say during an interview. Enjoy!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Preheat for Fabtech 2019 Nov 04, 2019

Show notes

Thank you for listening to episode 165 of the Welding Tips and Tricks Podcast! Fabtech is Next week so we thought it would be a good time to do a Preheat Show. We talk about what to expect and what all we have going on this year at Fabtech 2019. It's going to be a great show but very busy too! We look forward to seeing all of you there! Enjoy!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks! We'd like to Thank our Sponsors for this Episode! Clash of the Grinders by 3M Thank you to Clash of the Grinders for sponsoring this episode! Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019. If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube! Be sure to check out s.3m.com/cotg for up to date information! We would also like to Thank Bugo Systems for sponsoring this episode! For all your mechanized welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units! Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Stubby 2 Tig Weld Test Oct 30, 2019

Show notes

Thank you for listening to the Stubby episode 2. For this Stubby we answer a question from Brandon Perry about what do you do when you dip your tungsten during a weld test? Is it a done deal or are there things you can do to save the test and still land the job. Roy talks about how he has dealt with weld tests in the past. Enjoy!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Our TOPPODCAST Picks

Follow Us

Stay Connected

Welding Tips and Tricks Podcast

Related Podcasts

Links

Stay Connected