Welding Tips and Tricks Podcast

Latest Episodes:

Stubby 11 Work Ethics Jan 08, 2020

Show notes

Thank you for listening to this weeks Stubby episode! For this Stubby Jody is talking answering a question about Work Ethics. We hope you're able to pull out a few good tips from this one that will help you in your career as a weldor or whatever trade you might be in! Thank you for your support and be sure to share this podcast with your friends! Enjoy!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If your looking to a top quality torch be sure to check out all of CK Worldwide products. Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you. Be sure to head over to CKworldwide.com to see all their great products!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Re-post with Jason Hurst Jan 06, 2020

Show notes

Thank you for listening to episode 174 of the Welding Tips and Tricks Podcast! For this episode we had a great conversation with Works By A Hurst aka Jason Hurst. If you're not following Jason on his channels you're really missing out. Jason is known for many things but most of all his sculpting and art work. We talk about what got him into metalworking and where he sees it taking him in the future. We hope you enjoy this episode and pick up a few great tips along the way. Thanks for listening everyone! Enjoy!

Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where can you find Jason? On Instagram @worksbyahurst On the web at www.worksbyahurst.com On YouTube at Worksbyahurst On Patreon at Worksbyahurst Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! New music brought to you by Jody's son Jake and Artlist.io

Looking back at the last Decade Dec 30, 2019

Show notes

Thank you for listening to episode 173 of the Welding Tips and Tricks Podcast! Well, we made it to the end of 2019. In all honesty it went by in a blink. For this episode we thought it would be fun to take a look back at not only this past year but the past decade. We hope this episode inspires you to do the same thing and look back at how much your life has changed in the past 10 years. Are you happy with what you see? Would you have changed anything? These are what we asked each other. Hope you have a great New Years and start off this next decade with a bang! Enjoy!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks! Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Stubby 10 Being Picked On Dec 25, 2019

Show notes

For this week's Stubby Jonathan answers a question about being picked on at work. This is something that we all have dealt with either being new in the industry or sometime just being the new weldor in a shop. Hope this sheds some light on the subject. Enjoy!

Disclaimer: Just trying something a little different with the editing of this Stubby. The music sounded like it would fit with a little tweaking. Let us know what you think along with your next set of questions for future Stubby Episodes!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Hearing Protection with Pete Murphy from ISOtunes Dec 23, 2019

Show notes

Thank you for listening to Episode 172 of the Welding Tips and Tricks Podcast! For this week's episode we had a great conversation with Pete Murphy from ISOTunes about hearing protection. This is something we always think about after the fact or sometimes not at all. I know when we're young we think we do not need any protection but that comes as a cost as you get older. Hope this episode helps you think about your hearing before you start you day at work, everyday! Have a great week! Enjoy

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks! Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where can you find ISOTunes? On Instagram @ISOtunesaudio On the Web at www.ISOtunes.com On Amazon search ISOtunes for all their Hearing Protection Products Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Stubby 9 Gas Flow Settings for TIG Dec 18, 2019

Show notes

For this weeks Stubby episode Jody talks all about Gas Flow Settings. We're sure you'll pick up a few tips in this short episode! Thank you for all your support and be sure to send in your questions to Weldingtipsandtrickspocast@gmail.com. Enjoy!

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Brad Goodman Dec 16, 2019

Show notes

Thank you for listening to Episode 171 of the Welding Tips and Tricks Podcast! For this episode we had a fun chat with @deepsouthdimestacker aka Brad Goodman. During this chat we covered a lot of ground from what got Brad into welding, running a business, fixing boats, and much more. We hope you enjoy this chat as much as we did! Thank you for listening and be sure to share the podcast with your fellow co-workers!

If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from. It's always great to hear what our listeners think. Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners. Thanks! Welding Tips and Tricks Podcast Patreon Page We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services. Welding Tips and Tricks T-Shirts Available at Weldingtipsandtrickspodcast.com Sizes S-3XL Free Shipping within the USA Outside the USA please contact us and we'll find out the best shipping options for you.. Where can you find Brad? On Instagram @deepsouthdimestacker Where Can You Find the Welding Tips and Tricks Forum? Welding Tips and Tricks Forum Where can you find Us? You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com. We would really like to hear your thoughts about this podcast and what would make it better for you, the listener. Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests. Give us a Call You can also now call and leave us a voicemail! (915)308-7024 How to reach us individually Jody Collier http://www.weldingtipsandtricks.com/ Welding Tips and Tricks on Youtube @Weldmonger on Instagram Jonathan Lewis http://www.superiorweldandfab.com/ @Superiorwelding on Instagram Superiorwelding on Youtube Roy Crumrine http://www.crummywelding.com/ @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/. All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Stubby 8 Holding Tolerances Dec 11, 2019

Show notes

Thank you for listening to this weeks Stubby Episode of the Welding Tips and Tricks Podcast! This weeks Stubby is about holding Tolerances. If you lay beautiful welds and blow the dimensions you just made a nice looking piece of scrap. Roy tells us a little more about his process when it comes to holding tolerances. Enjoy

Thank you to CK Worldwide for sponsoring this Stubby Episode!

If you have a question for us to answer in a Stubby episode please send them to Weldingtipsandtrickspodcast@gmail.com and put Stubby in the subject line. Thank you!

Tig Brazing Dec 09, 2019

Show notes

Thank you for listening episode 170 of the Welding Tips and Tricks Podcast! For this weeks topic we chat about Tig Brazing! Jody recently posted a video of modifying a file into a knife and added a lot of Alumimun and Silicon Bronze to shape a handle. We wanted to dive a little deep into this conversation and chat about the different types of Tig Brazing we have done and how we have done it best. Hope you get a few good tips out of this one! Enjoy

Stubby 7 HR Questions with Sidni Hinesley Dec 04, 2019

Show notes

This week's Stubby was recorded live at Fabtech between Jody and Sidni Hinesley from Georgia Trade School. The audio is a little rough but the content is great. We hope you enjoy this Stubby and have great week!

If you would like to hear your question answered on a Stubby Episode be sure to send it to WeldingTipsandTricksPodcast@gmail.com

Our TOPPODCAST Picks

Follow Us

Stay Connected

Welding Tips and Tricks Podcast

Related Podcasts

Links

Stay Connected