TopPodcast.com
Menu
  • Home
  • Top Charts
  • Top Networks
  • Top Apps
  • Top Independents
  • Top Podfluencers
  • Top Picks
    • Top Business Podcasts
    • Top True Crime Podcasts
    • Top Finance Podcasts
    • Top Comedy Podcasts
    • Top Music Podcasts
    • Top Womens Podcasts
    • Top Kids Podcasts
    • Top Sports Podcasts
    • Top News Podcasts
    • Top Tech Podcasts
    • Top Crypto Podcasts
    • Top Entrepreneurial Podcasts
    • Top Fantasy Sports Podcasts
    • Top Political Podcasts
    • Top Science Podcasts
    • Top Self Help Podcasts
    • Top Sports Betting Podcasts
    • Top Stocks Podcasts
  • Podcast News
  • About Us
  • Podcast Advertising
  • Contact
Not in our directory?
Add Show Here
Podcast Equipment
Center

toppodcastlogoOur TOPPODCAST Picks

  • Comedy
  • Crypto
  • Sports
  • News
  • Politics
  • True Crime
  • Business
  • Finance

Follow Us

toppodcastlogoStay Connected

    View Top 200 Chart
    Back to Rankings Page
    Education

    The SafetyPro Podcast

    No management theory, platitudes, or guru speak – just actionable workplace safety and health info you can use right now.

    Advertise

    Copyright: © 2014-2021

    • Apple Podcasts
    • Google Play
    • Spotify

    Latest Episodes:
    045: 10 Steps to Improve Driver Safety Jul 03, 2018
    Show notes

    Join the Community of Safety Pros today! Mentioned in this episode: The National Safety Council The NSC Safe Driving Kit Preliminary estimates from the National Safety Council indicate motor vehicle deaths dipped slightly – 1% – in 2017, claiming 40,100 lives versus the 2016 total of 40,327. The small decline is not necessarily an indication of progress, as much as a leveling off of the steepest two-year increase in more than 50 years. The 2017 assessment is 6% higher than the number of deaths in 2015. If the estimate holds, it will be the second consecutive year that motor vehicle deaths topped 40,000. About 4.57 million people were injured severely enough to require medical attention in motor vehicle crashes in 2017, and costs to society totaled $413.8 billion. Both figures are about 1% lower than 2016 calculations. So what can we do about all of this? A driver safety program should keep the driver safe, as well as others who share the road. If necessary, the program must work to change driver attitudes, improve behavior, and increase skills to build a "be safe" culture. By instructing your employees in basic safe driving practices and then rewarding safety-conscious behavior, you can help your employees, and their families avoid tragedy. Do current prevention efforts address the problem? • Nearly all legislation focuses on banning only handheld phones or only texting while driving. • All state laws and many employer policies allow hands-free cell phone use. • Public opinion polls show people recognize the risks of talking on handheld phones and texting more than they realize the risks of hands-free phones. • Many drivers mistakenly believe talking on a hands-free cell phone is safer than handheld. A hands-free device most often is a headset that communicates via wired or wireless with a phone, or a factory-installed or aftermarket feature built into vehicles that often includes voice recognition. Many hands-free devices allow voice-activated dialing and operation. Hands-free devices often are seen as a solution to the risks of driver distraction because they help eliminate two obvious risks – visual, looking away from the road and manual, removing your hands off of the steering wheel. However, the third type of distraction can occur when using cell phones while driving – cognitive, taking your mind off the road. Hands-free devices do not eliminate cognitive distraction. The amount of exposure to each risk is vital. Crashes are a function of the severity of each risk and how often the risk occurs. Most people can recognize when they are visually or mechanically distracted and seek to disengage from these activities as quickly as possible. However, people typically do not realize when they are cognitively distracted, such as taking part in a phone conversation; therefore, the risk lasts much, much longer. This likely explains why researchers have not been able to find a safety benefit to hands-free phone conversations. The National Safety Council has compiled more than 30 research studies and reports by scientists around the world that used a variety of research methods, to compare driver performance with handheld and hands-free phones. All of these studies show hands-free phones offer no safety benefit when driving. Conversation occurs on both handheld and hands-free phones. The cognitive distraction from paying attention to a conversation – from listening and responding to a disembodied voice – contributes to numerous driving impairments. Specific driving risks are discussed in detail later in this paper. First, let us look at why hands-free and handheld cell phone conversations can impair your driving ability. Multitasking is a myth. Human brains do not perform two tasks at the same time. Instead, the brain handles tasks sequentially, switching between one task and another. Brains can juggle tasks very rapidly, which leads us to erroneously believe we are doing two tasks at the same time. In reality, the brain is switching attention between tasks – performing only one task at a time. The brain not only juggles tasks, but it also juggles focus and attention. When people attempt to perform two cognitively complex tasks such as driving and talking on a phone, the brain shifts its focus (people develop "inattention blindness"). Important information falls out of view and is not processed by the brain. For example, drivers may not see a red light. Because this is a process people are not aware of, people can't realize they are mentally taking on too much. Brain researchers have identified "reaction-time switching costs," which is a measurable time when the brain is switching its attention and focus from one task to another. Research studying the impact of talking on cell phones while driving has identified slowed reaction time to potential hazards are tangible, measurable, and risky. Longer reaction time is an outcome of the brain switching focus, which impacts driving performance. The cost of switching could be a few tenths of a second per switch. When the brain repeatedly switches between tasks, these costs add up. Even small amounts of time spent switching can lead to significant risks from delayed reaction and braking time. For example, if a vehicle is traveling 40 mph, it goes 120 feet before stopping, which equals eight car lengths (an average car length is 15 feet). A fraction-of-a-second delay would make the car travel several additional car lengths. When a driver needs to react immediately, there is no margin for error. Brains may face a "bottleneck" in which different regions of the brain must pull from a shared and limited resource for seemingly unrelated tasks, constraining the mental resources available for the tasks. Research has identified that even when different cognitive tasks draw on two different regions of the brain, we still can have performance problems when trying to do dual tasks at the same time, which may help explain why talking on cell phones could affect what a driver sees: two usually unrelated activities become interrelated when a person is behind the wheel. These tasks compete for our brain's information processing resources. There are limits to our mental workload. The workload of information processing can bring risks when unexpected driving hazards arise.31 Under most driving conditions, drivers are performing well-practiced, automatic driving tasks. For example, without thinking about it much, drivers slow down when they see yellow or red lights and activate turn signals when intending to make a turn or lane change. These are automatic tasks for experienced drivers. Staying within a lane, noting the speed limit and navigation signs, and checking rear- and side-view mirrors also are automated tasks for most experienced drivers. People can do these driving tasks safely with an average cognitive workload. During the vast majority of road trips, nothing terrible happens, as it should be. But that also can lead people to feel a false sense of security or competency when driving. Drivers may believe they can safely multitask; however, a driver always must be prepared to respond to the unexpected. The industrial ergonomics field has been able to identify physical workload limits and, in the same way, the workload limits of our brains now are being defined. The challenge to the general public is the bottlenecks and limits of the brain are more difficult to feel and see than physical limits. Multitasking Impairs Performance We can safely walk while chewing gum in a city crowded with motor vehicles and other hazards. That is because one of those tasks – chewing gum – is not a cognitively demanding task. When chewing gum and talking, people still can visually scan the environment for potential hazards. People do not perform as well when trying to perform two attention-demanding tasks at the same time. 32 Research shows that even pedestrians don't effectively monitor their environment for safety while talking on cell phones. 33-35 The challenge is managing two tasks demanding our cognitive attention. Indeed, most would agree that driving a vehicle involves a more complex set of tasks than walking. What are primary and secondary tasks? What happens when people switch attention between them? When people perform two tasks at the same time, one is a primary task and the other a secondary task. One task gets full focus (primary) and the other moves to a back burner (secondary). People can move back and forth between primary and secondary tasks. The American National Standards Institute publication ANSI Z15.1, Safe Practices for Motor Vehicle Operations, offers guidelines and best practices for motor vehicle safety programs. Also, the Network of Employers for Traffic Safety (NETS) assisted in developing a 10-step program. NETS 10-step program to minimize crash risk The Program provides guidelines for what an employer can do to improve traffic safety performance and reduce the risk of motor vehicle crashes. Following these steps helps to ensure that you hire capable drivers, only allow eligible drivers to drive on company business, and maintain company vehicles properly. Adherence to these ten steps can also help to keep your motor vehicle insurance costs as low as possible. These steps are from the NETS Traffic Safety Primer: A Guidebook for Employers. Step 1: Senior management commitment and employee involvement Senior management can provide leadership, set policies, and allocate resources (staff and budget) to create a safety culture. Actively encouraging employee participation and involvement at all levels of the organization is a good practice and will help the effort to succeed. Workers and their representatives must be involved in the initial planning phase. Step 2: Written policies and procedures A written statement emphasizing the commitment to reducing traffic-related deaths and injuries is essential to a successful program. Create a clear, comprehensive, and enforceable set of traffic safety policies and communicate them to all employees. Post them throughout the workplace, distribute copies periodically, and discuss the policies at company meetings. Offer incentives for sticking to the rules, and point out the consequences of disregarding them. Step 3: Driver agreements Establish a contract with all employees who drive for work purposes, whether they drive assigned company vehicles or personal vehicles. By signing an agreement, the driver acknowledges awareness and understanding of the organization's traffic safety policies, procedures, and expectations regarding driver performance, vehicle maintenance, and reporting of moving violations. Step 4: Motor vehicle record (MVR) checks Check the driving records of all employees who drive for work purposes. Screen out drivers who have poor driving records since they are most likely to cause problems in the future. Periodically review the MVR to ensure that the driver maintains a good driving record. Clearly define the number of violations an employee/driver can have before losing the privilege of driving for work, and provide training where indicated. Step 5: Crash reporting and investigation Establish and enforce a crash reporting and investigation process. All crashes, regardless of severity, should be reported to the employee's supervisor as soon as feasible after the incident. Company policies and procedures should guide drivers through their responsibilities in a crash situation. Review all crashes to determine their cause and whether or not the incidents were preventable. Understanding the root causes of crashes and why they are happening, regardless of fault, forms the basis for eliminating them in the future. Step 6: Vehicle selection, maintenance, and inspection Properly maintaining and routinely inspecting company vehicles is an essential part of preventing crashes and related losses. Review the safety features of all vehicles to be considered for use. Choose vehicles that demonstrate "best in class" status for crashworthiness and overall safety. Regular maintenance preventive maintenance should be done at specific mileage intervals consistent with the manufacturer's recommendations. A mechanic should do a thorough inspection of each vehicle at least annually with documented results placed in the vehicle's file. Personal vehicles used for company business are not necessarily subject to the same criteria and are generally the responsibility of the owner. However, personal vehicles used on company business should be maintained in a manner that provides the employee with maximum safety and reflects positively on the company. Step 7: Disciplinary action system Develop a strategy to determine the course of action after a moving violation and/or "preventable" crash. The system should provide for progressive discipline if a driver begins to develop a pattern of repeated traffic violations and/or preventable crashes. The system should describe what specific action(s) will be taken if a driver accumulates a certain number of violations or preventable crashes in any pre-defined period. Step 8: Reward/incentive program Develop and implement a driver reward/incentive program to make safe driving an integral part of your business culture. Safe driving behaviors contribute directly to the bottom line and should be recognized as such. Incorporate driving performance into the overall evaluation of job performance. Reward and incentive programs typically involve recognition, monetary rewards, special privileges, or other incentives to motivate positive behaviors. Step 9: Driver training/communication Provide continuous driver safety training and communication. Even experienced drivers benefit from periodic training and reminders of safe driving practices and skills. It is easy to become complacent and not think about the consequences of poor driving habits. Step 10: Regulatory compliance Ensure adherence to highway safety regulations. It is essential to establish which, if any, local, state, and/or Federal Regulations govern your vehicles and/or drivers. These regulations may involve, but may not necessarily be limited to the: Federal Motor Carrier Safety Administration U.S. Department of Transportation National Highway Transportation Safety Administration Federal Highway Administration Employment Standards Administration Promote safe driving practices The safety issues described below should be addressed in an employee awareness and training program. Secure materials for transport: Tools or equipment should be secured while being transported to prevent unsafe movement. During a crash or when making sudden maneuvers, loose objects can slide around or become airborne, injuring the driver or passengers. Objects that could become a hazard should be secured or stored outside the passenger compartment. Seat belt use: Seat belts are the single most effective means of reducing deaths and severe injuries in traffic crashes. Alcohol and drug-impaired driving: It is estimated that three in every 10 Americans will be involved in an impaired driving-related crash sometime in their life. Alcohol, certain prescription drugs, over-the-counter medications, and illegal drugs can all affect a person's ability to drive safely due to decreased alertness, concentration, coordination, and reaction time. Fatigued driving: Fatigued or drowsy driving may be involved in more than 100,000 crashes each year, resulting in 40,000 injuries and 1,550 deaths. Employees should be well-rested, alert, and sober on the road, so they are in a position to defend themselves from drivers who do not make the same choice. Train employees to make smart decisions when they're behind the wheel, on and off the job. Aggressive driving: Employees commuting to and from work or traveling for work often get caught up in bottlenecks and traffic delays, wasting their time, and…

    Full show notes at the publisher

    044: Safety, Security and Workplace Violence - What's your policy? Jun 07, 2018
    Show notes

    Powered by iReportSource

    SAMPLE POLICY HERE

    Because workplace violence is a growing problem at workplaces across America, it is good for a company to develop its own company-specific worksite violence policy and procedures manual.

    There is evidence that suggests worksite violence is largely preventable through the development and implementation of a specific policy and procedures. To be effective, company policy and procedures must discourage all types of worksite violence. They must also encourage employees to come forward in the event they are victims of, or witnesses to, any prohibited behavior. Additionally, whatever disciplinary action is deemed appropriate for policy violations, it must be handed out impartially and consistently. This will send a clear message that threats and other violent acts will not be tolerated by your company.

    When developing your company's policy and procedures, it is important to remember that employees are not likely to adhere to something they don't understand. To prevent this from happening, refrain from using legal jargon, or referencing other documents that employees may not be familiar with. Also, resist the urge to adopt any model or sample policy and procedures without first modifying them to address the specific needs of your company. Once you have a draft document prepared, you may find it helpful to solicit employee feedback regarding its clarity and completeness.

    A final point to keep in mind is that policies and procedures should not be forgotten once they have been published. Make plans to review them on a regular basis, and to update them to reflect changing roles and conditions. Also, encourage employees to provide suggestions for ways they can be improved.

    At a minimum, your company's workplace violence policy and procedures should include:

    • A statement that your company will not tolerate workplace violence of any kind.
    • A description of prohibited behaviors and actions.
    • Detailed procedures for reporting and investigating alleged instances of such behavior.
    • Measures which will be taken to ensure confidentiality.
    • Reassurance that retaliation for reporting an incident will not go unpunished.
    • Disciplinary action that will be imposed for engaging in prohibited behavior, as well as for retaliating against another employee.
    • Efforts that will be made to communicate company policy.
    • Methods that will be used to monitor workplace security.

    To be effective, policies and procedures must be:

    • Appropriate for the workplace.
    • Easily understood by all employees.
    • Revised as necessary to address changing conditions.
    • Reviewed with employees on a regular basis.

    You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    043: Workplace Safety Postings May 20, 2018
    Show notes

    Powered by iReportSource

    NERD ALERT! This episode covers all those little posters and postings that have to be displayed in the workplace. Most public and private employers fall under at least some posting requirements under federal, state, and/or local government laws, regulations, and/or executive orders. These workplace posters (also known as labor law posters or notices) are generally meant to make employees aware of their rights under certain laws or executive orders, or otherwise, impart information about the employer and/or the law or executive order.

    Employers need to be aware of the posting requirements that apply to them, as not having the appropriate information posted for employees may result in citations and fines. Some of these posting requirements have penalties associated with them for noncompliance. Failure to post federal employment law posters can potentially result in fines of over $32,000.

    In addition, it is important to be in compliance with posting regulations because the posters can help an employer prove that it has made employees aware of their rights under the law. Courts have ruled that failing to display a poster can extend the amount of time an employee has to sue for damages.

    The posters that a private or public employer needs to display will depend on its location, the number of employees who work for the employer, the industry type, and/or the contracts under which it performs work. The scope and applicability are specified in the posting law, regulation, or executive order.

    The federal government enforces workplace posters under the following regulations and executive orders (I only cover a few in the episode):

    8 CFR 214 — Nonimmigrant classes

    9 CFR 381 — Poultry products inspection regulations

    20 CFR 655 — Temporary employment of foreign workers in the United States

    20 CFR 658 — Administrative provisions governing the job service system

    20 CFR 1002 — Regulations under the uniformed services employment and reemployment rights act of 1994

    23 CFR 635 — Construction and maintenance

    29 CFR 4 — Labor standards for federal service contracts

    29 CFR 5 — Labor standards provisions applicable to contracts covering federally financed and assisted construction (also Labor standards provisions applicable to nonconstruction contracts subject to the contract work hours and safety standards act)

    29 CFR 10 — Establishing a minimum wage for contractors

    29 CFR 13 — Establishing paid sick leave for federal contractors

    29 CFR 24 — Procedures for the handling of retaliation complaints under the employee protection provisions of six environmental statutes and section 211 of the energy reorganization act of 1974, as amended

    29 CFR 471 — Obligations of federal contractors and subcontractors; Notification of employee rights under federal labor laws

    29 CFR 500 — Migrant and seasonal agricultural worker protection

    29 CFR 501 — Enforcement of contractual obligations for temporary alien agricultural workers admitted under section 218 of the immigration and nationality act

    29 CFR 516 — Records to be kept by employees

    29 CFR 525 — Employment of workers with disabilities under special certificates

    29 CFR 801 — Application of the employee polygraph protection act of 1988

    29 CFR 825 — The family and medical leave act of 1993

    29 CFR 1601 — Procedural regulations

    29 CFR 1627 — Records to be made or kept relating to age notices to be posted

    29 CFR 1635 — Genetic information nondiscrimination act of 2008

    29 CFR 1903 — Inspections, citations, and proposed penalties

    29 CFR 1904 — Recording and reporting occupational injuries and illnesses

    29 CFR 1960 — Basic program elements for federal employee occupational safety and health programs and related matters

    41 CFR 60-1 — Obligations of contractors and subcontractors

    Executive Order 13495 — Nondisplacement of qualified workers under service contracts

    You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    042: 7 Ways to Prevent Ergonomics Injuries Apr 29, 2018
    Show notes

    Powered by iReportSource

    What is an ergonomic injury?

    Opinions vary on how to define an ergonomics injury, and the definition of the term may depend on the context. However, ergonomic injuries are often described by the term "musculoskeletal disorders" or "MSDs." This is the term that refers collectively to a group of injuries and illnesses that affect the musculoskeletal system.

    Musculoskeletal disorders (MSDs) include a group of conditions that involve the nerves, tendons, muscles, and supporting structures (such as intervertebral discs). They represent a wide range of disorders, which can differ in severity from mild periodic conditions to those which are severe, chronic and debilitating. Some musculoskeletal disorders have specific diagnostic criteria and clear pathological mechanisms (like hand/arm vibration syndrome). Others are defined primarily by the location of pain and have a more variable or less clearly defined pathophysiology (like back disorders). Musculoskeletal disorders of the upper extremities include carpal tunnel syndrome, wrist tendonitis, epicondylitis, and rotator cuff tendonitis. Both non-occupational and occupational factors contribute to the development and exacerbation of these disorders.

    • Carpal tunnel syndrome,
    • Tendinitis,
    • Rotator cuff injuries (affects the shoulder),
    • Epicondylitis (affects the elbow),
    • Trigger finger, and
    • Muscle strains and low back injuries.

    There is no single diagnosis for MSDs.

    As OSHA continues to develop ergonomics-related guidance material for specific industries, the agency may narrow the definition as appropriate to address the specific workplace hazards covered. OSHA says it will work closely with stakeholders to develop definitions for MSDs as part of its overall effort to develop guidance materials.

    Musculoskeletal disorders

    Lower back disorders
    The research into MSDs supports a relationship between the development of lower back disorders and each of the following workplace risk factors:

    1. lifting and forceful movements,
    2. bending and twisting in awkward postures, and
    3. whole-body vibration.

    Disorders of the neck and shoulders
    For disorders of the neck and neck/shoulder region, the research identifies two important workplace factors:

    1. sustained postures causing static contractions of the neck and shoulder muscles (for example, working overhead in automobile assembly or in construction), and
    2. combinations of highly repetitive and forceful work involving the arm and hand, which also affect the musculature of the shoulder and neck region.

    Disorders of the hand, wrist, and elbow

    There are several conditions to consider within the hand and wrist region. Combined work factors of forceful and repetitive use of the hands and wrists are associated with carpal tunnel syndrome. Vibration from hand tools like chainsaws (those that do not have vibration controlling mechanisms) also contributes to carpal tunnel syndrome.

    Vibrating tool use has also been strongly linked to hand and arm vibration syndrome, a separate condition of the hand and wrist that affects the nerve and blood vessels.

    Carpal tunnel syndrome

    Carpal tunnel syndrome (CTS) is a cumulative trauma disorder (CTD) affecting the hands and wrists. CTS is the compression and entrapment of the median nerve where it passes through the wrist into the hand in the carpal tunnel.

    The median nerve is the main nerve that extends down the arm to the hand and provides the sense of touch in the thumb, index finger, middle finger, and half of the fourth, or ring, finger.

    When irritated, tendons housed inside the narrow carpal tunnel swell and press against the nearby median nerve. The pressure causes tingling, numbness, or severe pain in the wrist and hand. The pain is often experienced at night. The pressure also results in a lack of strength in the hand and an inability to make a fist, hold objects, or perform other manual tasks. If the pressure continues, it can damage the nerve, causing permanent loss of sensation and even partial paralysis.

    CTS develops in the hands and wrists when repetitive or forceful manual tasks are performed over a period of time. For example, the meatpacking industry is considered one of the most hazardous industries in the United States because workers can make as many as 10,000 repetitive motions per day in assembly line processes, such as deboning meats, with no variation in motion Consequently, stress and strain placed on the wrists and hands often results in CTS.

    Today, more than half of all U.S. workers are susceptible to developing CTS. Anyone whose job demands a lot of repetitive wrists, hand, and arm motion, which need not always be forceful or strenuous, might be a potential victim of CTS. CTS is common among meat and poultry workers, letter sorters, carpenters, garment workers, upholstery workers, shoe and boot makers, electronic and other assemblers, packers, product inspectors, machine operators, computer/keyboard operators, and cashiers.

    Since the early 1980s, CTS has been reported widely among many service-sector employees, including office workers and newspaper and news service employees who use video display terminals (VDTs). CTS, among other health effects, is becoming a growing problem among VDT users because of the numerous repetitive motions of keystroking data into the computer over long periods.

    Compounding problems is the fact that employees are often unaware of the causes of CTS and what to do about them. Initially, the person may have fatigue and pain that develops during the workday and disappears overnight with no physical symptoms. After a length of time, fatigue and pain develop earlier in the day, some physical symptoms such as clumsiness may occur, which affect work performance, and there may be no overnight recovery. When the case becomes full-blown, there is constant fatigue and pain with no overnight recovery, and disturbed sleep results.

    At this point, work performance is inhibited to the extent of requiring off-duty time or light/restricted duty. Often victims do not associate their pain with their work because symptoms may only occur during evening or off-duty hours. When workers finally seek medical help, they may be given the wrong diagnosis and find the road to recovery takes more time and money than had been anticipated.

    Length and intensity of exposure

    The research indicates that the greater the level of exposure to a single risk factor or combination of factors, the greater the risk of having a work-related musculoskeletal disorder. An additional important factor is a time between each episode of exposure. With adequate time to recover or adapt, and particularly when lower forces are involved, there may be less harm done to the body from repeated exposures. The intensity, as well as the extended length of the exposure to forceful, repetitive work, plays a substantial role in the risk of work-related musculoskeletal disorder in many traditional occupational settings.

    What factors may contribute to symptoms of MSDs?
    Each person has physical limits or a "comfort zone" of activities and work levels they can tolerate without developing symptoms of musculoskeletal disorders (MSDs). Some factors which may contribute to MSD symptoms include:

    • Furniture designs or a work area arrangement which produces bad postures.
    • Physically demanding work which employees are not accustomed to.
    • Workers who are generally out of shape.
    • Underlying arthritis.
    • Diminished muscle strength or joint flexibility.

    What's a good plan for preventing work-related musculoskeletal disorders?
    A good plan starts with employee involvement. Employers and employees can work together effectively to reduce work-related musculoskeletal disorders (WMSDs). Here are some ways:

    1. Look at injury and illness records to find jobs where problems have occurred.
    2. Talk with workers to identify specific tasks that contribute to pain and lost workdays.
    3. Ask workers what changes they think will make a difference.
    4. Encourage workers to report WMSD symptoms and establish a medical management system to detect problems early.
    5. Find ways to reduce repeated motions, forceful hand exertions, prolonged bending, or working above shoulder height.
    6. Reduce or eliminate vibration and sharp edges or handles that dig into the skin.
    7. Rely on equipment (not backs) for heavy or repetitive lifting.
      Simple solutions often work best. Workplace changes to reduce pain and cut the risk of disability need not cost a fortune. For example:
    • Change the height or orientation of the product or use tools with handles designed so that workers won't have to bend their wrists unnaturally to use the tool.
    • Offer workers involved in intensive keyboarding more frequent short breaks to rest muscles.
    • Vary tasks of assembly line workers to avoid repeated stress for the same muscles.
    • Provide lifting equipment so workers won't strain their backs.
    • Lifting equipment is available for everything from boxes and crates to nursing home patients.

    Send emails to info@thesafetypropodcast.com. You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    041: 7 Elements to an Emergency Action Plan Apr 26, 2018
    Show notes

    Powered by iReportSource

    Download the Elements to an Emergency Action Plan HERE

    How would you escape from your workplace in an emergency? Do you know where all the exits are located? What about a 2nd way out? A safety plan is needed, let' talk about that in this episode.

    Send emails to info@thesafetypropodcast.com. You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    040: Trenching and Excavation Safety Apr 11, 2018
    Show notes

    Powered by iReportSource OSHA Sloping/Benching Diagrams I am sure you may have heard about trenching incidents near you or reading about them on a national level. Managing safety for these operations is quite simple once you know the requirements and understand some of the nuances that go along with the different soils and protective systems we have. Hazards Cave-ins pose the greatest risk with these activities and are much more likely than other excavation-related accidents to result in worker fatalities. Other potential hazards include falls, falling loads, hazardous atmospheres, and incidents involving mobile equipment. One cubic foot of soil can weigh 100 pounds. One cubic yard of soil can weigh as much as a car, and the kinetic energy of soil falling 3, 4, 10 feet, and you can see the danger here. It has been said that an unprotected trench is an early grave. So let me start by stating the obvious: do not enter an unprotected trench. Protective Systems So at what point do we need to protect a trench? According to OSHA, trenches 5 feet (1.5 meters) deep or greater require a protective system unless the excavation is made entirely in stable rock. Oh, and forget about stable rock, I will explain that later. If less than 5 feet deep, a competent person may determine that a protective system is not required. Competent Person OSHA standards require that employers inspect trenches daily and as conditions change by a competent person before worker entry to ensure the elimination of excavation hazards. A competent person is an individual who is capable of identifying existing and predictable hazards or working conditions that are hazardous, unsanitary, or dangerous to workers, soil types and protective systems required, and who is authorized to take prompt corrective measures to eliminate these hazards and conditions. Access/Egress OSHA standards require safe access and egress to all excavations, including ladders, steps, ramps, or other safe means of exit for employees working in trench excavations 4 feet (1.22 meters) or deeper. These devices must be located within 25 feet (7.6 meters) of all workers. Here are some other requirements to follow: Ground Safety Keep heavy equipment away from trench edges. In the fire department, we tried to keep all heavy rigs at least 25 feet away. But this was to prevent vibrations to already unstable trenches during rescue operations. But heavy equipment that could pose a hazard of falling into the trench or even knocking materials into the trench has to be located back at a safe distance. The standard requires that you keep excavated soil (spoils) and other materials (like sand and gravel used for backfill or pipes being installed) at least 2 feet (0.6 meters) from trench edges. Ongoing inspections are needed to ensure this requirement is being met. Underground Safety Know where underground utilities are located before digging. This is a requirement in the OSHA standards, but it requires you to follow State laws that actually govern locating and marking PUBLIC utilities. Private utilities still need to be located and marked as well. So, familiarize yourself with the 811 "call before you dig" system. Test for atmospheric hazards such as low oxygen, hazardous fumes, and toxic gases when > 4 feet deep. This is when you suspect there could be a hazardous atmosphere or one could reasonably be expected to exist, such as in excavations in landfill areas or excavations in areas where hazardous substances are stored nearby. Falls and Falling Objects 
Do not work under suspended or raised loads and materials. This means workers down in the trench and the track hoe bucket swinging over their head to drop gravel, sand or pulling the material out. Also, Walkways have to be provided where workers or equipment are required or permitted to cross over excavations. Guardrails that comply with §1926.502(b) shall be provided where walkways are 6 feet (1.8 m) or more above lower levels. Again, only when workers are to CROSS OVER the open trench of 6 feet deep or more.

 Workzones Ensure that all personnel has high visibility or other suitable clothing when exposed to vehicular traffic. This is a requirement and you have to reference the Manual on Uniform Traffic Control Devices for minimum requirements for highways as well as flaggers being used. This tells you the ANSI rating needed for certain reflective apparel needed for day and night work. Emergency Preparedness Also, prepare for an emergency, especially if in an unfamiliar area, a rural area and/or working with a hazardous atmosphere by contacting the local emergency response service and determining whether or not they are equipped and prepared for a potential rescue. This may also drive the need to have someone trained in 1st aid/CPR at the site as well. Also, know where the nearest emergency medical center is located. For job sites, this should ALWAYS be a part of a site-specific safety plan anyway. Soil Classification Now, let's get into soil classification. You need to understand what OSHA deems to be stable or unstable soil and how the class of soil drives the protective system you choose. So let's get into some definitions you need to know and the different types of soil classifications as well as HOW to test soils. Remember, these terms are important to understand as we move forward: "Cemented soil" means a soil in which the particles are held together by a chemical agent, such as calcium carbonate, such that a hand-size sample cannot be crushed into powder or individual soil particles by finger pressure. "Cohesive soil" means clay (fine-grained soil), or soil with a high clay content, which has cohesive strength. Cohesive soil does not crumble, can be excavated with vertical side-slopes, and is plastic when moist. Cohesive soil is hard to break up when dry and exhibits significant cohesion when submerged. Cohesive soils include clayey silt, sandy clay, silty clay, clay, and organic clay. "Dry soil" means soil that does not exhibit visible signs of moisture content. "Fissured" means a soil material that has a tendency to break along definite planes of fracture with little resistance, or a material that exhibits open cracks, such as tension cracks, in an exposed surface. So anywhere in the Standard where you see reference to whether or not the slope or bench of a trench is "fissured", that is what it means. "Granular soil" means gravel, sand, or silt (coarse-grained soil) with little or no clay content. Granular soil has no cohesive strength. Some moist granular soils exhibit apparent cohesion. Granular soil cannot be molded when moist and crumbles easily when dry. "Layered system" means two or more distinctly different soil or rock types arranged in layers. Micaceous seams or weakened planes in rock or shale are considered layered. "Moist soil" means a condition in which a soil looks and feels damp. Moist cohesive soil can easily be shaped into a ball and rolled into small diameter threads before crumbling. Moist granular soil that contains some cohesive material will exhibit signs of cohesion between particles. "Saturated soil" means a soil in which the voids are filled with water. Saturation does not require flow. Saturation, or near saturation, is necessary for the proper use of instruments such as a pocket penetrometer or sheer vane. Which I will get into shortly. "Stable rock" means natural solid mineral matter that can be excavated with vertical sides and remain intact while exposed. "Submerged soil" means soil which is underwater or is free seeping. "Unconfined compressive strength" means the load per unit area at which a soil will fail in compression. It can be determined by laboratory testing or estimated in the field using a pocket penetrometer, by thumb penetration tests, and other methods. How to Classify Soil So let's dig into classifying soil. "Soil classification system" means, for the purpose of this subpart, a method of categorizing soil and rock deposits in a hierarchy of Stable Rock, Type A, Type B, and Type C, in decreasing order of stability. The categories are determined based on an analysis of the properties and performance characteristics of the deposits and the characteristics of the deposits and the environmental conditions of exposure. "Type A" means: Cohesive soils with an unconfined, compressive strength of 1.5 ton per square foot (tsf) (144 kPa) or greater. Examples of cohesive soils are clay, silty clay, sandy clay, clay loam and, in some cases, silty clay loam and sandy clay loam. Cemented soils such as caliche and hardpan are also considered Type-A. However, no soil is Type-A if: The soil is fissured; or The soil is subject to vibration from heavy traffic, pile driving, or similar effects; or The soil has been previously disturbed; or The soil is part of a sloped, layered system where the layers dip into the excavation on a slope of four horizontal to one vertical (4H:1V) or greater; or The material is subject to other factors that would require it to be classified as a less stable material. "Type B" means: Cohesive soil with an unconfined compressive strength greater than 0.5 tsf (48 kPa) but less than 1.5 tsf (144 kPa); or Granular cohesion-less soils including angular gravel (similar to crushed rock), silt, silt loam, sandy loam and, in some cases, silty clay loam and sandy clay loam. Previously disturbed soils except those which would otherwise be classed as Type C soil. Soil that meets the unconfined compressive strength or cementation requirements for Type A, but is fissured or subject to vibration, or Dry rock that is not stable; or Material that is part of a sloped, layered system where the layers dip into the excavation on a slope LESS steep than four horizontal to one vertical (4H:1V), but only if the material would otherwise be classified as Type B. "Type C" means: Cohesive soil with an unconfined compressive strength of 0.5 tsf (48 kPa) or less; or Granular soils including gravel, sand, and loamy sand; or Submerged soil or soil from which water is freely seeping; or Submerged rock that is not stable, or The material in a sloped, layered system where the layers dip into the excavation or a slope of four horizontal to one vertical (4H:1V) or steeper. In order to properly classify the soil, OSHA requires at least on visual analysis and one manual test be performed on the soil. Visual analysis is conducted to determine qualitative information about the excavation site. In general, you need to consider the soil adjacent to the excavation, the soil forming the sides of the open excavation, and soil samples taken from excavated material. Here are the steps: Observe samples of soil that are pulled out of the ground as well as the soil in the sides of the excavation. You need to estimate the range of particle sizes and the relative amounts of the particle sizes. Soil that is primarily composed of fine-grained material (like a putty) is cohesive material. Soil composed primarily of coarse-grained sand or gravel is to be considered granular material. Watch the soil as it is excavated. If it remains in clumps when excavated and dropped out of the bucket or shovel it is considered cohesive. If it breaks up easily, falls apart and does NOT stay in clumps you would consider it to be granular. Look at the sides of the opened excavation and the surface area next to it. Crack-like openings, like tension cracks, could mean that you are dealing with fissured material. If chunks of soil spalls off a vertical face of the excavation, this is another sign the soil could be fissured. Small spalls are evidence of moving ground and are indications of potentially hazardous situations. So be sure to look for this. Watch the area next to the excavation and the excavation itself for evidence of existing utilities and other underground structures, and to identify previously disturbed soil. An obvious sing would be indicated via utility markings made prior to digging or conduit, pipe, etc. being exposed as you dig. A less obvious sign of this would be a small patch of gravel or sand that you may have cut through or running alongside the trench. This may indicate backfill material and thus previously excavated soil. Also, watch the open side of the excavation for a possible layered system. Examine layered systems to identify if the layers slope toward the excavation. Estimate the degree of slope of the layers. This will also drive the slope angle allowed or if you can even bench the sidewalls. Look for evidence of surface water, water seeping from the sides of the excavation, or the location of the level of the water table. Both in the excavation as well as at the surface. Check the area for sources of vibration that may affect the stability of the excavation face. If you are running a front end loader up and down the length of an open trench carrying loads or straddling a part of the end of the trench with the track hoe then you might be subjecting the excavation to vibrations that could lead to unstable sections. OSHA also requires at least 1 manual test to be performed in order to determine quantitative as well as qualitative properties of soil. This provides more information in order to classify soil properly so as to get us to the next step; selecting appropriate protective measures. Let's run down the options for manual testing: Plasticity test. For this test, you simply mold a moist or wet sample of soil into a ball and then try to roll it into threads as thin as 1/8-inch in diameter. If the soil is cohesive (sticks to itself) it can be rolled into threads without crumbling and falling apart. For example, if at least a two-inch (50 mm) length of 1/8-inch thread can be held on one end, so dangling it, and it does NOT tear, the soil is cohesive. Dry strength test. If the soil is dry and crumbles on its own or with moderate pressure breaks into individual grains or even a fine powder, it is granular - so, any combination of gravel, sand, or silt. If the soil is dry and falls into clumps that break up into smaller clumps, but the smaller clumps can only be broken up with difficulty, it may be clay in any combination with gravel, sand or silt. If the dry soil breaks into clumps that do not break up into small clumps and which can only be broken with difficulty, and there is no visual indication the soil is fissured, the soil may be considered un-fissured. Thumb penetration test. The thumb penetration test can be used to estimate the unconfined compressive strength of cohesive soils. (This test is based on the thumb penetration test described in the American Society for Testing and Materials (ASTM) Standard designation D2488 - "Standard Recommended Practice for Description of Soils (Visual - Manual Procedure).") Type A soils with an unconfined compressive strength of 1.5 tsf can be readily indented by the thumb; however, they can be penetrated by the thumb only with very great effort. Type C soils with an unconfined compressive strength of 0.5 tsf can be easily penetrated several inches by the thumb and can be molded by light finger pressure. This test should be conducted on an undisturbed soil sample, such as a large clump of spoil, as soon as possible after excavation to keep to a minimum the effects of exposure to drying. If the excavation is later exposed to rain, flooding, etc. the classification of the soil must be changed as well. Other strength tests. Estimates of unconfined compressive strength of soils can also be obtained by the use of a pocket penetrometer or by using a hand-operated shear vane. These are instruments used to penetrate a sample with a rod containing a resistance spring and a measuring cylinder to read unconfined compressive strength. The shear vane is a tool with a numbered dial…

    Full show notes at the publisher

    039: Vacation Message - Off the Job Safety Apr 03, 2018
    Show notes

    Powered by iReportSource

    Final vacation week! Thanks for being loyal listeners. I wanted to remind everyone in this quick episode about taking safety with when you leave work.

    I may put together an episode about this topic soon. Share your off-the-job safety tips by sending me an email to info@thesafetypropodcast.com.

    You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    038: 6 Steps to an Effective HAZCOM Safety Program Mar 19, 2018
    Show notes

    Powered by iReportSource

    I am on vacation! But, I still managed to get a quick episode out for all the awesome listeners. 6 Steps to an Effective Hazard Communication Program for Employers That Use Hazardous Chemicals!

    It's a good one! Get the document mentioned in this episode: Hazard Communication: Steps to an Effective Hazard Communication Program for Employers That Use Hazardous Chemicals Fact Sheet

    and

    Hazard Communication: Small Entity Compliance Guide for Employers That Use Hazardous Chemicals

    Email comments or questions to info@thesafetypropodcast.com. You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    037: Safety for Tree Trimmers Mar 12, 2018
    Show notes

    Powered by iReportSource

    Get the freebies mentioned in this episode HERE

    As I get ready to head to the beach for Spring Break (I will already be there when this episode drops!) I was thinking about some of the seasonal work we need doing at our homes as well as at our businesses. And that got me thinking about tree trimmers. And it hit me - when it comes to workplace safety, it is easy to overlook the folks that do some of this work, either at our homes or when we hire these companies to help us maintain our facilities.

    Each year thousands of trees are uprooted by powerful winds from hurricanes, thunderstorms, etc. And usually taking power lines and transformers with them. I wanted to get a quick topic out about the safety needed for workers that come out and take care of these trees and help us improve our personal property as well as our businesses.

    Tree trimming is serious business. There are numerous SERIOUS safety hazards involved. Everything from falls to electrical hazards, these workers must be well-trained, well-equipped and focused to do this job safely.

    One of the more common hazards deals with power lines. Either downed lines from a storm or tree that fell or just trimming tress near power lines. The safest approach is ALWAYS ASSUME THAT POWER LINES ARE ENERGIZED!

    If clearing trees, contact the utility company to discuss de-energizing and grounding or shielding of power lines. This takes time, yes, but just search online for stories involving tree trimmers being shock or electrocuted on the job! Oh, and it often involves ground workers; yep, this can happen when a ladder or the boom of cherry picker unknowingly comes into contact with an energized lines and the operator is insulated in the basket, doesn't realize it and a ground worker walks up and grabs the metal door of the truck, reaches for a tool or something like that and becomes part of that circuit. It happens more than you think! These can all be avoided.

    One way to avoid disaster is to always perform a hazard assessment of the job in general as well as the work area prior to the start of work. So for electrical hazards, ask will you get closer than, say, 10 feet to your average power line? What about the stability of the ground for outriggers on the cherry picker? Is there traffic nearby or will you need to be in the roadway? What about clearance for your work, especially when removing or cutting down a tree?

    Let me say, to "fell a tree" means more than just cutting it down. Felling means to cut the tree in such a way that it falls in the desired direction and results in the least damage to the tree. To safely fell a tree, you must eliminate or minimize exposure to potential hazards found at the tree and in the surrounding area. This means BEFORE YOU BEGIN WORKING!

    Part of being prepared for your work means having the right equipment. Always use proper personal protective equipment as recommended by the manufacturer's operating manual, including eye, face, head, hand, and foot protection for tools and machinery. Chippers, shredders, chainsaws, etc. all have very specific safety requirements. And don't forget TRAINING!

    Your employees NEED to be trained on all the tools they will be using. Don't rely on the old "I have been using chainsaws for years" certification. Just look online for any number of manufacturer videos or literature on chainsaw safety. Or any other power tool. The Power Tool Institute has some good videos a well, so search for them too. By the way, I have an OSHA publication that covers the hazards of wood shippers as well. So be sure to hit that link!

    Broken or hanging branches, attached vines, or a dead tree that is leaning can be of concern. All of these hazards can cause injuries. So making sure employees are trained to spot these overhead hazards and stage work accordingly should also be covered. I have an OSHA publication that covers falls and falling objects hazards for tree care workers. Just hit the link in these show notes or on the website for this episode.

    What about working outdoors in general? There is extreme cold and heat concerns. This should all be a part of your employee training. How to spot poisonous plants, what about insect bites and stings? How about encounters with snakes or other wild animals? Basically, if it is a realistic hazard of the job, have a plan to educate workers on the hazards and to manage them! If you are not sure what to cover in any training. Just break the job down into stages:

    1. Getting ready for a job: utilities location/de-energization, insulating, etc., shop safety, vehicle safety, storing/transporting fuels, oils, etc. PPE inspections, things like that.
    2. Arriving on the job: staging, sizing up the scene (especially after a storm or downed tree event), nearest emergency room, 911 coverage (for rural areas)
    3. Working: Process safety. As an example:
    • If the tree is broken and under pressure, make sure you know which way the pressure is going. If not sure, make small cuts to release some of the pressure before cutting up the section.
    • Be careful of young trees that other trees have fallen against. They act like spring poles and can propel back. (Many professional loggers have been hurt in this manner.)
    • A tree may have not fallen completely to the ground and be lodged against another tree. Extreme care must be taken to safely bring the trees to the ground.
    • If possible, avoid felling into other trees or objects. Don't turn your back on the tree as it falls, and hide behind a standing tree if possible.
    • As trees fall through other trees or objects, branches and objects may get thrown back towards workers.
    • Look at other standards for guidance. You may not consider yourselves loggers, but the logging standard has some really good best practices on which to base your operations. Share facts about logging in general to drive a point: like more people are killed while felling trees than during any other logging activity.

    These accidents CAN be avoided! So when getting ready for the spring season and all the storms it brings, downed trees and power lines; remember safety starts well before the work begins! I hope I gave you some things to look for, some topics to research and begin training your workers on as well as started you all thinking about this work in general. If you hire these workers to help you maintain your facilities, be sure to ask for certifications for aerial lift training, if that applies, ask for a pre-job plan to include where they will stage their equipment, provide them a list of PPE they will need to wear while at your site. This can really start a conversation about safety and give you an idea on how proactive that contractor is and whether they are ready for this type of work.

    If you are a tree trimmer, either worker or company owner, this is a good time to start looking at safety as both an employee benefit as well as customer service. It is the right thing to do, it is good for business, it just makes sense.

    Share your tips for safety during these types of activities by sending me an email to info@thesafetypropdcast.com or by visiting thesafetypropodcast.com.

    You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    036: Confined Space Entry Safety Part 3: Rescue Teams Mar 06, 2018
    Show notes

    Powered by iReportSource

    In the last couple of episodes, I dance around the rescue team parts of the standard. I want to get into that section here. Let's start with an outside rescue option since a lot of folks go this route. If you recall, whenever you use outside resources you must evaluate a prospective rescuer's ability to respond to a rescue summons in a timely manner, considering the hazard(s) identified.

    So you have to have done a hazard assessment first so that you can have a meaningful conversation with the outside agency. Also, don't forget, bring them in to do a walk-thru, look at the spaces involved, the internal configurations, chemicals used onsite, etc.

    You also have to develop and implement procedures for summoning rescue and emergency services to your location. Ask about whether the local authorities use a regional dispatcher, this may delay response time a little, does your site use a different number to dial out to emergency services, instead of 911? All of this goes into your program and training.

    Once you determine the rescue team that will be used, you have to develop a procedure for rescuing entrants from permit spaces and be able to provide necessary emergency services to those workers. The primary requirement in the first aid standards is that an employer must ensure prompt first aid treatment for injured employees, either by providing for the availability of a trained first aid provider at the worksite or by ensuring that emergency treatment services are within reasonable proximity of the worksite.

    You have to take appropriate steps prior to any accident (like making arrangements with the service provider) to determine if emergency medical assistance will be promptly available when an injury occurs. While the standards do not prescribe a number of minutes, OSHA has long interpreted the term "near proximity" to mean that emergency care must be available within no more than 3-4 minutes from the workplace, an interpretation that has been upheld by the Occupational Safety and Health Review Commission and by federal courts.

    One option these standards provide employers is to ensure that a member of the workforce has been trained in first aid. This option is, for most employers, a feasible and low-cost way to protect employees, as well as putting the employer clearly in compliance with the standards. OSHA recommends but does not require, that every workplace include one or more employees who are trained and certified in first aid, including CPR.

    The first aid training standards at 29 CFR 1910.151 and 1926.50(c) generally apply throughout the industries that they cover. Other standards which apply to certain specific hazards or industries make employee first aid training mandatory, and reliance on outside emergency responders is not an allowable alternative. For example, see 29 CFR 1910. 266(i)(7) (mandatory first aid training for logging employees), and 29 CFR 1910.269(b) (requiring persons trained in first aid at work locations in the electric power industry).

    So seriously look at getting a team of volunteers to be trained, on all shifts. More support for this is that medical literature establishes that, for serious injuries such as those involving stopped breathing, cardiac arrest, or uncontrolled bleeding, first aid treatment must be provided within the first few minutes to avoid permanent medical impairment or death.

    Also, in workplaces where serious accidents such as those involving falls, suffocation, electrocution, or amputation are possible, emergency medical services must be available within 3-4 minutes, if there is NO EMPLOYEE on the site who is trained to render first aid. So this can buy a victim more time if folks are trained and equipped onsite already.

    OSHA exercises discretion in enforcing the first aid requirements in particular cases. OSHA recognizes that a somewhat longer response time of up to 15 minutes may be reasonable in workplaces, such as offices, where the possibility of such serious work-related injuries is more remote.

    Now, I will restate what the standard says: In the absence of an infirmary, clinic, or hospital in near proximity to the workplace which is used for the treatment of all injured employees, a person or persons shall be adequately trained to render first aid. Adequate first aid supplies shall be readily available. This is a way to meet that standard!

    And, for an in-house rescue team, at least one member of the rescue team or service holding a current certification in first aid and CPR is available. Trust me, ALL of them should have it. What if the only member trained in 1st aid goes down? So spread the love folks!

    So what does this tell us? Well, it tells us we need to carefully examine and consider the actual hazards likely to be present as well as the injuries and illnesses likely to occur. This has to be included in the training in order for us to claim our in-house first aid team is "adequate".

    Let, me illustrate this for you; A lot of the first aid training programs I have reviewed are really good at preparing you (as best as possible) for an emergency. They cover what to do, how to react, things like that. A lot of effort goes into keeping the responder safe; bloodborne pathogens, PPE, checking the scene; which is great. Then there are sections that get into how to perform a patient survey, for both an unconscious and conscience patient. And then there are sections of training covering how to stop bleeding and immobilize a limb maybe.

    Here is where you need to be sure to include covering injuries likely to occur at your facility. Work with the instructor ahead of time to include how to treat a chemical burn, and be specific - like hydrochloric acid, or chlorine gas for example. This site-specific or even chemical or hazard-specific training is what will deem your personnel "QUALIFIED" to render first aid at your facility. The basic community first aid training, just won't be enough.

    Okay, let's move on to an in-house rescue team. First, they have to be equipped for and proficient in performing the needed rescue services. Do you have underground tanks? Do they have rectangular, square or round entry points, or a combination? This tells me what types of hoists I will need to have available for rescue. What about horizontal spaces? Are some of them above grade, requiring staging from an elevated platform? This tells me aerial lifts, personnel hoists, stair chairs, stokes baskets, etc may be needed as well. What about SCBA, airline respirators, things like that for rescue teams?

    So equipped means just that; equipment needed to facilitate a rescue from any and all possible spaces to be entered. Standardization really helps but some older facilities that have been upgraded and modified over the years do not have this luxury. But think about this moving forward; standardize openings (their shape and size) whenever possible, and their location (at grade vs. elevated openings, things like that.). This ALL has to be set up and gone over each time you have training for this team. Every piece, all the PPE that may be needed, all of the monitoring instruments, everything!

    Ensure that rescue and other affected employees (like potential victims) practice making permit space rescues at least once every 12 months. This has to be by way of a simulated rescue in which you remove dummies, manikins, or actual persons from the actual permit spaces or from representative permit spaces. Representative permit spaces shall, with respect to opening size, configuration, and accessibility, simulate the types of permit spaces from which rescue is to be performed. I have seen a few facilities that have old tanks that have been cleaned and the sides cut open but they keep them onsite as a training aid for this purpose. Of course, you may not have the room for this, but that was a representative space from them.

    Of course, non-entry rescue is where it's at whenever possible. If your rescue personnel never have to enter this is best. To facilitate non-entry rescue, retrieval systems or methods have to be used whenever an authorized entrant enters a permit space unless the retrieval equipment would increase the overall risk of entry or would not contribute to the rescue of the entrant.

    So practicing at LEAST every 12-months is the OSHA standard. I recommend quarterly just so that you can reinforce these procedures and familiarize rescue teams with this equipment better. Also, hold a monthly first responder meeting instead of just the annual refresher for first aid and every two years for CPR recertification. This is a "use it or lose it" skill, it's perishable, so keeping it fresh is going to help save lives. Give your responders a chance to talk about scenarios, practice first aid techniques in the meetings, dry runs, even debrief past responses since the last meeting to see what went right, what could be better, things like that. It will really add value and enhance the bare minimum OSHA sets for this stuff.

    Look at your training program; what is it missing? What don't you cover that we just ran through? How can you enhance your existing training? Make it stick? This is the challenge I have for you: do a full review of your written confined space entry program, the written permit, the rescue plan, your chosen method of rescue (non-entry, in-house or outside rescue team) and try to poke holes in the plans. That way you can improve it.

    Get ALL the freebies from this podcast HERE.

    You can find me on LinkedIn! Post a LinkedIn update letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    Previous 1 15 16 17 18 19 21 Next

    Related Podcasts

    Making Sense with Sam Harris

    1

    Making Sense with Sam Harris Education
    Grammar Girl

    2

    Grammar Girl Education
    Good Life Project

    3

    Good Life Project Education
    Explain It to Me

    4

    Explain It to Me Education
    Team Never Quit

    5

    Team Never Quit Comedy
    Optimal Living Daily – Personal Development and Self-Improvement

    6

    Optimal Living Daily – Personal Development and Self-Improvement Alternative Health
    footer-logo

    Contact Us

    Toll Free: 844-670-7747

    Links

    • Home
    • Top Charts
    • Networks
    • Apps
    • Independents Podcasts
    • Podcast Advertising
    • Podcast News
    • Contact Us
    • About Us
    • Analytics & Insights

    Stay Connected

      Privacy, Terms of Use & Our Code of Ethics Protecting Content Creators Copyrights