TopPodcast.com
Menu
  • Home
  • Top Charts
  • Top Networks
  • Top Apps
  • Top Independents
  • Top Podfluencers
  • Top Picks
    • Top Business Podcasts
    • Top True Crime Podcasts
    • Top Finance Podcasts
    • Top Comedy Podcasts
    • Top Music Podcasts
    • Top Womens Podcasts
    • Top Kids Podcasts
    • Top Sports Podcasts
    • Top News Podcasts
    • Top Tech Podcasts
    • Top Crypto Podcasts
    • Top Entrepreneurial Podcasts
    • Top Fantasy Sports Podcasts
    • Top Political Podcasts
    • Top Science Podcasts
    • Top Self Help Podcasts
    • Top Sports Betting Podcasts
    • Top Stocks Podcasts
  • Podcast News
  • About Us
  • Podcast Advertising
  • Contact
Not in our directory?
Add Show Here
Podcast Equipment
Center

toppodcastlogoOur TOPPODCAST Picks

  • Comedy
  • Crypto
  • Sports
  • News
  • Politics
  • True Crime
  • Business
  • Finance

Follow Us

toppodcastlogoStay Connected

    View Top 200 Chart
    Back to Rankings Page
    Education

    The SafetyPro Podcast

    No management theory, platitudes, or guru speak – just actionable workplace safety and health info you can use right now.

    Advertise

    Copyright: © 2014-2021

    • Apple Podcasts
    • Google Play
    • Spotify

    Latest Episodes:
    055: Using Drones for Safety Jan 12, 2019
    Show notes

    Powered by iReportSource

    How would you like an OSHA inspector to launch a drone over top your job site or building, looking for hazards and violations? Perhaps workers on the roof, forklift operators in the yard, cell tower workers on a mountain - an OSHA inspector could see it all without even stepping foot on your property.

    It's not as far-fetched as it may sound.

    OSHA has authorized the use of drones by certain inspectors to collect evidence during inspections in certain workplace settings.

    But before you freak out, currently, OSHA inspectors are only allowed to use drones for enforcement purposes in areas that are inaccessible or pose a safety risk to inspection personnel.

    The other issue worth noting; OSHA must obtain express consent from the employer prior to using a drone on an inspection. In addition, personnel on-site must be notified of the aerial inspection prior to the drone's launching.

    So, for now, most employers don't have to worry. But, it is something that employers should keep in mind, in case OSHA decides to expand their use of drones. Obviously, any secret usage over an employer's worksite could bring up constitutional issues, but as technology advances and drones become more commonplace, employers may want to incorporate the issue into their OSHA inspection procedures.

    Listen to the full podcast episode to hear about ways you can use this technology to your advantage!

    Send emails bout how you use technology to keep workers safe to info@thesafetypropodcast.com

    You can also find the podcast on LinkedIn, Facebook, Instagram and Twitter


    054: Integrating Safety with Existing Processes Dec 23, 2018
    Show notes

    Powered by iReportSource

    Have you ever struggled to make your safety processes mesh with other existing business processes, like quality or maintenance? By using lean principles and tools it can be easy to do just that. Stop trying to convert workers and take the work to them, in terms/tools they are comfortable using.

    This can be as simple as using a layered audit approach - piggyback off another inspection that is done frequently. Or leveraging existing operator checks, sprinkling safety-related checks in there. If there are chemical checks needed for quality then add checks for labels, SDS, spill kits, PPE, etc. to the list.

    Using lean manufacturing is all about first asking what else are we doing that has worker's attention? Can we leverage those efforts? I read a pretty decent article touching on this and you can find it here: https://www.industryweek.com/safety/think-lean-make-safety-simpler

    But for a deeper look and some real-world examples listen to this podcast episode. Be sure to share your tips on how you have been able to integrate safety with existing business processes. Send emails to info@thesafetypropodcast.com

    You can also find the podcast on LinkedIn, Facebook, Instagram and Twitter


    053: How to Handle OSHA Safety Inspections Dec 05, 2018
    Show notes

    Powered by iReportSource

    In this episode, I will talk about preparing for an OSHA inspection and how to best handle the event should one occur. Here, my focus will be what to do up-front, and should a compliance safety and health officer (CSHO) arrive at your facility, what to expect and what you should have ready to make it go smoother.

    I will also talk briefly about how to handle any alleged violation and potential citations that come your way.

    Let's first get some definitions out of the way:

    I already mentioned the CSHO (Compliance Safety and Health Officer): This is the federal OSHA employee who conducts inspections for the agency — a.k.a. "OSHA Inspector."

    General Duty Clause (GDC): A section of the OSH Act — Section 5(a)(1) — that requires employers to protect employees from recognized, serious hazards, regardless of whether there is a specific standard addressing that hazard. OSHA often uses the GDC to cite employers for not protecting workers from ergonomic-type risks, workplace violence, and heat stress.

    OSHA: The Occupational Safety and Health Administration — the federal agency that sets and enforces worker safety and health laws.

    OSH Act: The Occupational Safety and Health Act of 1970, which is the enabling legislation for OSHA.

    Repeat violation: A hazardous/violative condition that is the same or similar to a previously cited condition in the past five years at either the same establishment or another establishment of the same company under federal OSHA jurisdiction.

    Serious violation: A violation where there is a substantial probability that death or serious physical harm could result, and the employer knew or should have known of the hazard.

    Willful violation: A violation that the employer intentionally and knowingly commits.
    Now let's get into the arrival and inspection process and how to best handle these and ultimately what you can do to prepare your company better.

    Understand that OSHA has the right to inspect places of work. A question I get more often than I am comfortable with is whether or not you can require OSHA to come back with a warrant. Yes, employers may exercise their Constitutional rights to request a warrant; however, there is a relatively low threshold for OSHA to obtain such approval - so this is not advised in many cases and will not show your willingness to cooperate. Instead, use your right to an opening conference upon their arrival.

    Pro Tip: When the compliance officer arrives, avoid showing a negative attitude. Creating a wrong first impression could set up your facility for failure, so practice having a positive attitude towards the compliance officer. Being polite can put the inspector at ease and create a positive environment—you might even enjoy the inspection.

    Know the reasons that prompt most inspections. Inspections can be triggered in a variety of ways, such as reports of serious injuries, complaints, targeting/emphasis programs, and plain-view hazards. They are seldom at random.

    Note that some smaller workplaces in low-hazard industries may be exempt from certain types of inspections. See CPL 02-00-051-Enforcement exemptions and limitations under the Appropriations Act.

    Know the phases of an OSHA inspection. Inspections will consist of an opening conference, records review, walkthrough inspection, and closing conference. Citations will not be issued during the inspection; those come later from the Area Office director.

    Verify CSHO's credentials. Always ask to see the CSHO credentials upon arrival. You can also contact the area office to verify their identity if needed.

    Get a clear understanding of the proposed scope of an inspection. CSHO's should generally stick to that scope. This means, what do they want to see? A specific process, part of the facility, program review, etc. Which tells you exactly how to narrow the visit - where to take them and where NOT to take them!

    Have documents ready. The OSHA Compliance Officer will look for documentation including but not limited to injury and illness records, written safety plans, past inspections, training, exposures, and other safety-related documents. You should maintain, review, and keep documents in a place where you or an assigned supervisor can easily find and present them to the officer. Remember that OSHA could show up at any time. They'll usually arrive during business hours, but an inspection prompted by a severe workplace injury during third shift could mean a knock at the door in the middle of the night.

    Pro Tip: A note about self-audits or inspections; OSHA has never officially stated that they will not use self-audits. However, in a final policy published in the Federal Register (65:46498-46503), OSHA noted that the Agency will not "routinely" request to see self-audit reports at the initiation of an inspection, and the Agency will not use self-audit reports as a means of identifying hazards upon which to focus during an inspection.

    OSHA has also stated that where a voluntary self-audit identifies a hazardous condition, and the employer has corrected the condition prior to the inspection and taken appropriate steps to prevent recurrence, the Agency will refrain from issuing a citation, even if the violative condition existed within the six months limitations period during which OSHA is authorized to issue citations.

    Keep in mind, OSHA has the right to take photographs during inspections. It is a good idea for employers to duplicate this effort. Employers must also remember that OSHA does have the right to photograph in confidential areas; in instances where there are trade secrets, OSHA has special privacy procedures to follow concerning maintaining the case file documentation.

    As for videos, the same rules apply here as well. I remember during one fatality I was investigating; the CHSO informed me of his intent to videotape and he showed me the camera, how he would turn it on, the light indicating it was on, etc. He even told me that he would NOT record me or ask me any questions during the recording. It was merely to capture the worksite and equipment that was involved in the fatality. He made it a point to ensure I was comfortable - he even dispelled the myth that CHSOs would pretend they turned the camera off but kept secretly recording to gain evidence. That is NOT how they operate. I was there alone without an attorney, walking through a site where a 20-year employee of the company was killed - a sensitive and emotional time. CHSOs are highly trained, and more importantly, they are also human; they have empathy like anyone else. I was so impressed by the CHSO I have stayed in touch with him since then, and we have collaborated on Q&A from time to time.

    Always correct hazards. Although you might not undergo an inspection, correcting daily hazards can prepare you for an unexpected visit. I have said it for years, your number one strategy for dealing with an OSHA inspection is three words: BE. IN. COMPLIANCE.

    You'll have less reason to fear an OSHA inspection if you conduct self-inspections, looking for missing machine guards, blocked fire exits, unkept working areas, and fall hazards. Preparing your workplace for a compliance officer will depend on your ability to identify and correct known hazards consistently.

    For each alleged violation found during the inspection, the compliance officer has discussed or will discuss the following with you:

    • Nature of the violation
    • Possible abatement measures you may take to correct the violative condition
    • ƒPossible abatement dates you may be required to meet
    • ƒAny penalties that the area director may issue

    Do not interfere with employee interviews. Under the OSH Act, OSHA has the right to question employees privately. Supervisors, however, do have the right to legal counsel. Be careful that you do not appear to be coaching or intimidating the CHSO.

    I always held a brief meeting with all employees with the CHSO present to introduce them and explain that the only expectation the company has is that the employees, should they be interviewed, are to be cooperative and professional and that their conversation is kept private and confidential.

    OSHA has six months from learning of a hazard to issue citations. Only the Area Director can issue citations. Once you get it, it will be certified mail, and the clock starts ticking at that point. I will explain it.

    Post OSHA citations for three days or until the violation is corrected, whichever is longer. The citation must remain posted in a place where employees can see it, for three working days or until the violation is corrected, whichever is longer. (Saturdays, Sundays, and Federal holidays are not counted as working days.)

    Pro Tip: Post it as close to the violation location as possible - in some cases, a public location will be acceptable. Like a bulletin board or inside a job trailer.

    Exercise your right to an informal conference to discuss proposed citations. Employers may also contest citations before an independent review commission. Which has to be requested ASAP! I always tell employers, even if you are going to agree with the citations, always ask for the informal conference.

    It is an excellent opportunity to show to OSHA that you are committed to improving workplace safety and can even negotiate an informal settlement agreement - which will always have some training requirements attached, so be prepared to invest in time and resources and not just expect to smile and get a good neighbor discount.

    Pro Tip: The Area Director is authorized to reduce proposed penalties by up to 50% with an informal settlement agreement. I have negotiated many of these and even had some proposed citations vacated during these conferences after bringing evidence and arguing an interpretation of the standard - risky but we were right so it made sense to do it at the time.

    Remember there are only 15-working days to file a proper notice of contest. This must be in writing. Which is why it is critical to get the informal conference going right away!

    Do not retaliate against any worker for exercising their rights under the law. This is key - and if employee violations of company rules are at play, always ask OSHA about the retaliation rules if in doubt. But this may be needed as a result of any investigations.

    A pro Tip: Simulate inspections…

    The best way to train is to simulate an inspection. Before an OSHA Compliance Officer visit, practice the procedures that will be taken when the officer arrives. Insurance underwriters can offer some assistance here - think about it, they will often inspect workplaces as a part of their coverage policy, so why not communicate to staff/employees that this is also a mock audit?

    Ask the insurance rep for their agenda and add some activities that the CHSO may conduct. This might include, but not be limited to:

    • Instructing your front office personnel to practice greeting a
    • compliance officer in a polite manner.
    • Training staff to answer questions concisely.
    • Conducting mock interviews with employees.
    • Practicing what you'll discuss during the opening and closing conferences.

    Chances are, an inspection will go smoothly if you prepare your facility by having documents ready, correcting hazards before the visit, and simulating the inspection.

    Taking these precautions won't eliminate the possibility of a citation, but the compliance officer might view your effort as "good faith," making it easier to manage any hiccups during the inspection, so put your fears to rest and prepare, prepare, prepare!

    Be sure to send emails to info@thesafetypropodcast.com

    Find the podcast also on LinkedIn, Facebook, Instagram, and Twitter


    052: Safety Incentives that Work Nov 20, 2018
    Show notes

    Powered by iReportSource

    OSHA has changed course in its view of employers' post-incident drug testing programs and injury rate-based incentive programs. In a Memorandum to Regional Administrators and State Designees published October 11, the Agency now says most of these types of programs do not run afoul of the anti-retaliation provisions of the injury and illness recordkeeping regulation at §1904.35(b)(1)(iv).

    This is a massive shift in policy guidance from that published when the Agency issued the final rule in May 2016 requiring employers to submit injury and illness records electronically. As part of that rulemaking, OSHA added a provision that employers do not have any barriers for employees to report injuries or illnesses. The rule also said that employers could not discriminate or punish employees for being injured.

    While the rule itself didn't address drug testing or incentive programs, policy guidance published along with it indicated that most post-incident drug testing programs would be in violation. The same thing was said about incentive programs that were tied to injury rates.

    But now, OSHA says that many employers who implement safety incentive programs and/or conduct post-incident drug testing do so to promote workplace safety and health. Also, the Agency says evidence that the employer consistently enforces work rules (whether or not an injury or illness is reported) would demonstrate that the employer is serious about creating a culture of safety, not just the appearance of reducing rates. Thus, action taken under a safety incentive program or post-incident drug testing policy would only violate §1904.35(b)(1)(iv) if the employer took action to penalize an employee for reporting a work-related injury or illness rather than for the legitimate purpose of promoting workplace safety and health.

    In the new policy, OSHA says that incentive programs can be an essential tool to promote workplace safety and health. One type of incentive program rewards workers for reporting near-misses or hazards and encourages involvement in a safety and health management system. "Positive action that is taken under this type of program," the Agency says, "is always permissible under §1904.35(b)(1)(iv)."

    OSHA describes another type of incentive program that is rate-based and focuses on reducing the number of reported injuries and illnesses. These programs typically reward employees with a prize or bonus at the end of an injury-free month or evaluate managers based on their work unit's lack of injuries. The Agency says these rate-based incentive programs are also permissible under §1904.35(b)(1)(iv) "as long as they are not implemented in a manner that discourages reporting."

    So, if an employer takes an adverse action against an employee under a rate-based incentive program, such as withholding a prize or bonus because of a reported injury, OSHA would not cite the employer under §1904.35(b)(1)(iv) as long as the employer has implemented adequate precautions to ensure that employees feel free to report an injury or illness.

    What would be an "adequate precaution"?

    OSHA says that a statement that employees are encouraged to report and will not face retaliation for reporting may not, by itself, be adequate to ensure that employees feel free to report, mainly when the consequence for reporting will be a lost opportunity to receive a substantial reward. However, an employer could avoid any inadvertent deterrent effects of a rate-based incentive program by taking positive steps to create a workplace culture that emphasizes safety, not just rates. For example, the Agency says that any inadvertent deterrent effect of a rate-based incentive program on employee reporting would likely be counterbalanced if the employer also implements elements such as:

    • An incentive program that rewards employees for identifying unsafe conditions in the workplace;
    • A training program for all employees to reinforce reporting rights and responsibilities and emphasizes the employer's non-retaliation policy;
    • A mechanism for accurately evaluating employees' willingness to report injuries and illnesses.

    In addition, OSHA says that most instances of workplace drug testing are permissible under §1904.35(b)(1)(iv). Examples of permissible drug testing include:

    • Random drug testing.
    • Drug testing unrelated to the reporting of a work-related injury or illness.
    • Drug testing under state workers' compensation law.
    • Drug testing under other federal law, such as a U.S. Department of Transportation rule.
    • Drug testing to evaluate the root cause of a workplace incident that harmed or could have harmed employees. If the employer chooses to use drug testing to investigate the incident, the employer should test all employees whose conduct could have contributed to the incident, not just employees who reported injuries.

    Listen to this episode for more information on how to set up your incentive program properly.

    Be sure to send emails to info@thesafetypropodcast.com

    Find the podcast also on LinkedIn, Facebook, Instagram, and Twitter


    051: How to Write an Effective Accident Report Nov 15, 2018
    Show notes

    Powered by iReportSource

    With proper safety training and an air-tight safety program in your workplace, you won't have to write too many incident reports. However, sometimes, things slip through the cracks, and it results in an incident or near-miss. When this happens, it's not only mandated by OSHA to report it, but it can be imperative in future prevention of similar events.

    The best way to go about reporting an incident is to fill out an incident report. The following steps will help you to write an effective incident report that covers all of the necessary elements needed for further action.

    1. Respond promptly

    You should begin to gather the details almost immediately after receiving news and becoming aware of the incident. Which will help you collect details that are fresh in the minds of those involved, and will help you be able to piece together the factors involved in the incident's occurrence.

    2. Gather all of the details and facts

    Having all the facts is vital in being able to decipher what caused the incident and how it can be prevented in the future. It's also necessary for business insurance purposes and to help make decisions in the final stages of analysis. Critical facts of the incident to include are:

    • The date and time it occurred
    • The specific location of the incident
    • All of those who were involved and their immediate supervisors
      • Names
      • Title of their position
      • The department of employees involved
      • Their immediate supervisor(s)
    • Names and accounts of those who witnessed the incident
    • The series of events that took place leading up to the incident
    • What the employee(s) involved were doing at the exact time of the incident
    • The environmental conditions of the location in which it occurred
      • For example, were the floors slippery? Was the area cluttered? Was there a lot of noise? Etc.
    • The circumstance or materials involved when it took place
      • For example, the tools, machinery, equipment, or PPE that was involved.
    • The specific injuries that were sustained to the involved parties, and what area of the body were affected
    • The treatment that was administered to the employees who were injured
    • Any damage to the equipment, materials, areas, etc.

    Another resource that is beneficial for documenting events is to take pictures of where the incident took place. Note the conditions of the area and the scene(s) of the incident. If available, CCTV footage is another avenue of reviewing the chain of events that led to the incident.

    3. Piece together the sequence of events

    Piecing together the series of events will help determine which factors were involved and how they were involved at the time the incident occurred.

    • The details of the events leading up to the incident.
      • What specific actions the employee was doing before the incident
      • What materials, tools, equipment was involved
    • Determine what was involved in the incident.
      • What exactly happened to the employee
      • How they were injured
      • Why they were injured
    • Identify what happened after the incident.
      • What did the employee do after the incident
      • What kind of reaction did they have
      • How did they signal for help if they were able to
      • How was it discovered that the incident occurred

    The details gathered above should be specific enough so that anyone reading the report can seamlessly create a story in their mind, and can, therefore, view the incident as a whole. It often helps to create a diagram to start to analyze the incident visually.

    4. Analyze your findings of the incident

    You can now begin to create an in-depth analysis of what caused the events, the factors involved, and ultimately answer the "why" of the incident. With the details you gathered, you should be able to speculate the following items:

    • The primary cause (Ex: a machine that wasn't locked out released hazardous energy)
    • The secondary causes (Ex. an employee did not check to see if the machine was locked out before maintenance)
    • Additional factors (Ex. Employees haven't received their refresher lockout tagout training)

    5. Formulate a preventative action plan

    An incident report is useless without a plan to correct actions for future prevention. Every incident is a hard lesson that has yet to be learned or has been overlooked. The following items are examples of areas that may need correcting based on the facts surrounding the incident:

    • Adequate employee safety training
    • Sufficient and proper maintenance of machinery, equipment, workspace, etc.
    • Re-evaluating standard operating procedures regarding specific jobs, and re-assessing how they should be carried out
    • Identifying and conducting a job hazard analysis (JHA) to cover all risks associated with particular job tasks thoroughly and carrying out the necessary safety training.
    • Operational changes and adjustment that include more thorough safety measures, such as adding additional safety equipment, changing procedures, etc.

    Bottom Line

    A good incident report identifies the problem using in-depth analysis and research and offers a viable solution to that problem. A thorough, well-prepared report will accurately pinpoint what corrective action is necessary so that you may prevent future incidents and keep your team safe!

    Reprinted with permission from Atlantic Training

    Be sure to send emails to info@thesafetypropodcast.com

    Find the podcast also on LinkedIn, Facebook, Instagram, and Twitter


    050: Electrical Safety-Related Work Practices Oct 09, 2018
    Show notes

    Powered by iReportSource

    OSHA's Safety-Related Work Practices standards for general industry are performance-oriented requirements that complement the existing electrical installation standards.

    These work-practice standard include requirements for work performed on or near exposed energized and de-energized parts of electric equipment; use of electrical protective equipment; and the safe use of electric equipment.

    These rules are intended to protect employees from the electrical hazards that they may be exposed to even though the equipment may comply with the installation requirements in, 1910 Subpart S (electrical). When employees are working with electric equipment, they must use safe work practices. Such safety-related work practices include keeping a prescribed distance from exposed energized lines, avoiding the use of electric equipment when the employee or the equipment is wet, and locking-out and tagging equipment which is de-energized for maintenance.

    The training requirements apply to employees who face a risk of electric shock that is not reduced to a safe level by the electrical installation requirements of §1910.303 - §1910.308. Employees in the following occupations would typically face these risks and are required to be trained:

    • Blue-collar supervisors
    • Electrical and electronics engineers
    • Electrical and electronic equipment engineers
    • Electricians
    • Industrial machine operators
    • Material handling equipment operators
    • Mechanics and repairers
    • Painters
    • Riggers and roustabouts
    • Stationary engineers
    • Welders

    Except for electricians and welders, workers in these groups do not need to be trained if their work or the work of those they supervise does not bring them close enough to exposed parts of electric circuits operating at 50 volts or more to ground for a hazard to exist.

    Other employees who also may reasonably be expected to face the comparable risk of injury due to electric shock or other electrical hazards must also be trained.

    These standards cover electrical safety-related work practices for both qualified persons (those who have training in avoiding the electrical hazards of working on or near exposed energized parts) and unqualified persons (those with little or no such training) working on, near, or with the following installation:

    • Premises Wiring. Installations of electric conductors and equipment within or on buildings or other structures, and on other premises such as yards, carnival, parking, and other lots, and industrial substations;
    • Wiring for Connections to Supply. Installations of conductors that connect to the supply of electricity; and
    • Other Wiring. Installations of other outside conductors on the premises.
    • Optical Fiber Cable. Installations of optical fiber cable where such installations are made along with electric conductors.

    Other Covered Work By Unqualified Persons

    The provisions of these standards also cover work performed by unqualified persons on, near, or with the following installations:

    • Generation, transmission, and distribution installations. Installations for the generation, control, transformation, transmission, and distribution of electric energy (including communication and metering) located in buildings used for such purposes or located outdoors.
    • Communication installations. Installations of communications equipment to the extent that the work is covered under OSHA standard §1910.268
    • Installations in vehicles. Installations in ships, watercraft, railway rolling stock, aircraft, or automotive vehicles other than mobile homes and recreational vehicles.
    • Railway installations. Installations of railways for generation, transformation, transmission, or distribution of power used exclusively for the operation of rolling stock or installations of the railway solely used for signaling and communication purposes.

    IMPORTANT: Excluded Work by Qualified Persons

    If a qualified person is performing work near one of the four types of installations listed above, and the work is not being done on or directly associated with the installation, then that work is covered under the Safety-Related Work Practices.

    Definitions you should know

    Barrier: A physical obstruction that is intended to prevent contact with equipment or live parts or to prevent unauthorized access to a work area.

    Deenergized: Free from any electrical connection to a source of potential difference and free from electrical charge; not having a potential different from that of the earth.

    Disconnecting means: A device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.

    Energized: Electrically connected to a source of potential difference.

    Exposed: (As applied to live parts.) Capable of being inadvertently touched or approached nearer than a safe distance by a person. It is applied to parts not suitably guarded, isolated, or insulated.

    Live parts: Energized conductive components.

    Qualified person: One who has received training in and has demonstrated skills and knowledge in the construction and operation of electric equipment and installations and the hazards involved.

    • Note 1 to the definition of "qualified person": Whether an employee is considered to be a "qualified person" will depend upon various circumstances in the workplace. For example, it is possible and, in fact, likely for an individual to be considered "qualified" concerning specific equipment in the workplace, but "unqualified" as to other equipment. (See 1910.332(b)(3) for training requirements that specifically apply to qualified persons.)
    • Note 2 "qualified person": An employee who is undergoing on-the-job training and who, in the course of such training, has demonstrated an ability to perform duties safely, and who is under the direct supervision of a qualified person, is considered to be a qualified person for the performance of those duties.

    In general, the standard requires covered employers to:

    • Provide appropriate training to both qualified and unqualified employees.
    • Provide effective safety-related work practices to prevent electric shock.
    • Deenergize live (energized) parts (operating at 50 volts or more) before employees work on them.
    • Provide suitable safety-related work practices for employees working on energized parts.
    • Treat de-energized parts that have not been locked out or tagged out as energized parts.
    • Place a lock or a tag (or both, if at all possible) on parts of fixed electric equipment circuits which have been de-energized.
    • Maintain a written copy of the lockout/tagout procedures.
    • Determine safe procedures for de-energizing circuits and equipment.
    • Disconnect circuits and equipment from all electric energy sources.
    • Release stored electrical energy which may endanger personnel.
    • Block or relieve stored non-electrical energy in devices that could reenergize electric circuit parts.
    • Place a lock and tag on each disconnecting means used to de-energize circuits and equipment.
    • Attach a lock to prevent persons from operating the disconnecting means.
    • If a lock cannot be applied, a tag may be used without a lock.
    • Make sure a tag used without a lock is supplemented by at least one additional security measure that provides a level of protection equal to that of the use of a lock.
    • A lock may be used without a tag if only:
      • One piece of equipment is de-energized, and
      • The lockout period does not extend beyond the work shift, and
      • Employees exposed to the hazards of reenergizing the equipment understand this procedure.
    • Verify the de-energized condition of the equipment.
    • Have the lock and tag be removed by the employee who applied it, or if that employee is not at the worksite, by another person designated to do so.
    • Only allow qualified persons to work on electric circuit parts or equipment that has not been de-energized.
    • Deenergize and ground overhead lines or provide other protective measures before work is started.
    • Maintain the distances in 1910.333(c)(3)(i) when an unqualified person is working in a position near overhead lines.
    • Maintain the distances in 1910.333(c)(3)(ii) when a qualified person is working in a position near overhead lines.
    • Maintain the distances in 1910.333(c)(3)(iii) when operating any vehicle or mechanical equipment capable of having parts of its structure near energized overhead lines.
    • Provide necessary illumination for employees in confined spaces.
    • Provide necessary shields, barriers, or insulating materials so employees can avoid contact with exposed energized parts in confined or enclosed spaces.
    • Require portable ladders that could come into contact with exposed energized parts to have non-conductive side rails.
    • Prohibit the wearing of conductive jewelry and other items if the person might contact exposed energized parts.
    • Prohibit the performing of housekeeping duties around energized parts.
    • Allow only qualified persons to defeat an interlock temporarily.
    • Visually inspect portable cord- and plug-connected equipment and flexible cord sets (extension cords) before each use.
    • Take the defective portable cord and plug connected equipment and extension cords out of use.
    • Make sure flexible cords used with grounding-type equipment must have an equipment grounding conductor.
    • Prohibit employees from manually reenergizing a circuit de-energized by a circuit protective device until it has been determined the equipment and circuit can be safely energized.
    • Visually inspect test instruments and equipment before it is used; do not use defective equipment.
    • Use only test instruments and equipment that is rated for the circuits, equipment, and environment.
    • Provide employees the necessary PPE (and require its use) in areas where there are potential electrical hazards, including arc flash and blast.
    • Maintain PPE in a safe, reliable condition and inspect or test it periodically.
    • Require guarding be put in place when normally enclosed live parts are exposed for maintenance or repair.
    • Use safety signs, safety symbols, or accident tags as needed to warn employees about electrical hazards.
    • Use barricades in conjunction with safety signs when necessary.
    • Station attendants to warn of danger if signs and barricades are not enough.

    Let me know what you think; send emails to info@thesafetypropodcast.com

    You can find me on LinkedIn! Post a LinkedIn update, letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter


    049: 8 Tips for Selecting Key Safety Performance Indicators Sep 30, 2018
    Show notes

    Mentioned in this episode: www.whosonlocation.com www.mightylinetape.com/podcast http://bit.ly/KPIWhitePaper How do you measure safety in your workplace to enhance performance and reduce employee downtime? There are several tested methods that Environmental, Health, and Safety (EHS) leaders use to reduce employee incidents and illnesses. Among the leading methods, which the Gensuite white paper discusses, are Key Performance Indicators (KPIs)–or leading and lagging indicators. Leading indicators are pre-incident measurements, as opposed to lagging indicators, which are measurements collected after an incident occurs. For example, a slip and fall incident from stray construction materials is a lagging indicator because the incident has already occurred, but an inspection that notes the poor quality of the surrounding area and prevents a future slip and fall from taking place is a leading indicator. A key component of leading indicators is that they measure safety events or behaviors that precede incidents and have a predictive quality. By measuring leading indicators including conditions, events and sequences that precede and lead up to accidents, these KPIs have value in predicting the arrival of an event and can provide the opportunity to introduce control measures to stop the event from happening. Recently, many articles have stressed the importance of looking beyond lagging indicators, but then how can your organization learn from past incidents and track results? By combining incident measurement and training management software, your company or organization can adopt a holistic approach to reducing workplace incidents and meeting Occupational Safety and Health Administration (OSHA) standards. Both leading and lagging indicators can be relevant to workplace safety and worth measuring. They present important aspects of an overall safety management system. We have to use all the tools available to us to create an environment that drives us to a zero-incident job site. Selecting and Using the Right Key Performance Indicators (KPIs) for Your Organization Attempting to track complex data analytics and results, train employees and keep your team safe on your own can be dicult tasks to handle. Leading and lagging indicators can help reduce and prevent incidents. One way EHS leaders begin using KPIs is by selecting the appropriate sets for their organization. Lagging Indicators OSHA recordable injuries OSHA citations OSHA recordable-case rate DART-case rate Fatality rate Worker compensation claims Experience modification rate Leading Indicators Near misses (Note: this is still responding to something that already happened, just no consequences; might consider this lagging) Behavioral observations Training records Department safety meetings Employee-perception surveys Trainee scores on post-training quizzes Preventive-maintenance programs When trying to pinpoint the indicator type essential for your organization–understand that both are essential. Leading indicators are like a car windshield, and lagging indicators are like the rearview mirror. You'll certainly spend more time looking out the windshield to see what's coming–with leading indicators–than looking in your rearview mirror to see where you've been–with lagging indicators. Look at your company and see how you can start moving forward–toward a culture of safety–rather than looking behind. Within the leading and lagging indicator types, there are eight important characteristics that KPIs should have. Ensure that you follow this guideline when selecting the ones important for your workplace. 1. Actionable–metrics that have measurable steps 2. Achievable–setting goals that are obtainable 3. Meaningful–obtaining information for continued tracking 4. Transparent–metrics that are clearly understandable 5. Easy–to communicate effectively 6. Valid–relevant to the organization's objectives 7. Useful–metrics that are beneficial to the organization's safety goals 8. Timely–distributing information that is still relevant to the organization Once you select your set of indicators and follow the necessary characteristics, it's important to track how well they are working and be flexible if the set needs to be revised for consistent improvement. Why Leading and Lagging Indicators Are Important: Rising OSHA Regulations & Safety Trends Each year brings about new regulations and carries over existing regulations that companies must abide by. Thus, it's important to stay on top of ever-evolving regulatory trends so you don't risk non-compliance. Use the leading and lagging indicator system to help with the following key OSHA regulations and safety trends. Overview of the Occupational Exposure to Crystalline Silica Rule OSHA's final rule aims to reduce the risk of lung cancer, silicosis, chronic obstructive pulmonary disease and kidney disease in America's workers by limiting their exposure to respirable crystalline silica. The rule is comprised of two standards, one for Construction and one for General Industry and Maritime. Responsible employers have been protecting employees from the harmful substance for years, but now it's becoming mandatory. Here are some of the rule requirements: Reduces the permissible exposure limit for silica to 50 micrograms per cubic meter of air Requires employers to: use engineering controls to limit worker exposure; provide respirators when engineering controls cannot adequately limit exposure; develop a written exposure control plan, and train workers on silica risks and how to limit exposures Provides medical exams to monitor highly exposed workers and gives them information about their lung health Overview of OSHA Improve Tracking of Workplace Injuries and Illnesses Rule The Bureau of Labor Statistics reports more than three million workers suffer from a workplace injury or illness every year. Currently, little or no information about worker injuries and illnesses is made public or available to OSHA. With this new rule, employers are required to submit a record of the injuries and illnesses to OSHA to help them with identifying hazards and fixing problems. Here are the rule requirements: Establishments with 250 or more employees must *electronically submit injury and illness information from OSHA forms 300, 300A and 301 (300 & 301 starting in 2018) Establishments with 20-249 employees in high-risk industries must submit information from OSHA form 300A Trend #1: Dealing with Workplace Stress The National Institute of Occupational Safety And Health emphasizes that work-related stress disorders are expected to rise as the economy continues to undergo various shifts and impacts. Therefore, companies should take steps to ensure that any current programs are robust enough to reduce the concerns associated with stress in the workplace, as well as implement any new programs that show an increased effectiveness at reducing the generation of stress. Trend #2: Leveraging Risk Management 2017 saw a continued trend in developing internal risk management programs and systems, and 2018 into 2019 looks to be the year where many of these programs are leveraged for results across the company spectrum. In other words, sucient time has occurred for the internal development of risk management data and effectiveness that this can now be translated directly into specific areas of the business to further reduce inherent risk development within the company. Trend #3: Increased Reliance on Predictive Analytics A new trend becoming prominent in 2018 is an increased reliance on predictive analytics. Many companies have been developing risk management and mitigation data and using analytics to help derive sense from this mountain of information. 2019 looks to be the year where many of these are put into practice company-wide. In addition, the trend of emphasizing the use of these predictive analytics is expected to rise as much of this information is refined even further. This should begin to show positive returns for companies that have been implementing this predictive technology as part of a risk management profile. However, there is still time to take advantage of these systems for those companies that have not implemented these types of analytics. Trend #4: More Regulatory Changes There are few that doubt that more regulatory and legislative changes are expected in 2018. While many differences continue to grow between national policy and those enacted on the state and local level, few can predict what the specific changes will actually be. However, what is an almost certainty is that for companies, flexibility will be necessary in order to adapt to the new policies to come. Models and Methods for Using Leading and Lagging Indicators: A Contextual and Visual Guide Various proven, yet antiquated and manual, methods have been used for measuring KPIs, such as those discussed in the report, A Method for Modeling of KPIs Enabling Validation of Their Properties. The authors cover two techniques workplaces use to track KPIs. The first model integrates the following attributes for tracking performance: indicator name, type, scale, source, owner and threshold. Though, it is not easy to find all of this information so EHS experts often rely on documentation, expert knowledge and previous conceptual models. The second model used for KPI formalization is known as performance indicator expression. It is "a mathematical statement over a performance indicator evaluated to a numerical, qualitative". In other words, a given value for a time point, for the organization, unit or agent. The authors suggest specifying the required values of performance indicators as constraints coming from goals. The relations between performance indicators are modeled using predicates. The third model used by EHS professionals and safety teams is known as the Heinrich Pyramid–a traditional way of tracking occupational illnesses and injuries. The Heinrich Pyramid (also known as the Safety Triangle) quantifies the number of reported workplace incidents into four main categories: major injuries, severe accidents, first aid cases and near misses. Employee concern reports, safety observations and at-risk observations can also be added to the base of the triangle to incorporate leading indicators into the analysis. This is a 1-10-30-600 model. For every 1 incident reported in the major injury category, severe accidents are 10 times as likely to happen. Also, for every 1 major injury, approximately 30 first aid cases, and 600 near misses. When companies plug their own incidents into this model or pyramid, they can see if they have the corresponding model ratio, as described above, and if they have a significant amount of major and severe incidents. The premise for this model is that the more companies focus on reducing the numbers at the bottom of the pyramid, the more likely they are to reduce major safety incidents at the top. The pyramid is inclusive of many types of injuries and incidents, but it doesn't assist EHS professionals with narrowing down the data to the critical cases/accidents, root causes and solutions. For example, a site could have a series of cases that stem from ergonomic-related issues and spend significant amounts of time on root cause and trend analysis instead of the cases/accident that have a high potential to result in an employee fatality or significant property damage. Critics of the Heinrich Pyramid also claim that "adhering to it can lead to an over-emphasis on worker behavior and not enough attention on health and safety management software systems." No matter the flaws, there is always a solution to the system. These methods are used to benefit companies' safety success rates and business performance objectives. The methods can be adapted to any enterprise modeling approach. Companies can apply these measures of thinking into a conventional and modernized process by integrating EHS management software into their workplace as discovered in the following section. A Gensuite Solution: Implementing Key Performance Indicators (KPIs) Into Your Workplace To simplify and digitize the three models and methods discussed above, companies turn to compliance and management software systems such as Gensuite. Such systems enhance workplace safety performance by simplifying the tracking of leading and lagging indicators. Utilize Gensuite EHS software tailored to measure KPIs and manage training compliance. Just a few of Gensuite's specialized features of these tools include: Framework for managing regulatory and program-specific training requirements. Validate training effectiveness through course-specific e-quizzes Incident investigation, root cause analysis, corrective and preventive action tracking Integrate with occupational health, medical and computer systems for case tracking and program visibility What makes this important right now? Why should your business invest? Other than avoiding everyday safety violations and reoccurring workplace injuries, investing will help you meet current and upcoming OSHA regulations. Here's a look at customizable Gensuite applications. Incidents & Measurements The Gensuite Incidents & Measurements application can help you address the new regulation by enabling one-click generation of a site/business OSHA 300, 300A, and 301 forms. In addition, Gensuite joins ongoing discussions with subscribers and industry groups to meet with OSHA to talk through options for direct system integrations, thus removing the need for sites to manually generate logs and input them into OSHA's website. Other benefits of the Gensuite Incidents & Measurements application: Tracking of hours worked and sites recordable rates Monitoring site performance on a monthly/quarterly basis through auto-generated site metric reports Instant system-generated email notifications upon entry/modification of incidents so site-leadership stays up-to-date Training Compliance The Gensuite Training Compliance suite can help you address both new OSHA regulations by keeping your employees up-to-date with OSHA's mandatory training requirements. In addition, training employees prevent new and future injuries from occurring, so you don't have to evaluate progress based on how many employees have been severely injured and how that number has improved. Prevent them from happening in the first place. Other benefits of the Gensuite Training Compliance application: Establish a framework for managing regulatory and program-specific training requirements, Alert training leaders of new and transferred employees for training needs assessment Integrate automatic updates from HR systems, offer multiple training instruction types to Engage employees in classroom and e-learning training; integrated training calendar solution for session scheduling, provide employees with access to a diverse library of pre-loaded Training content licensed from leading providers such as RedVector®, SkillSoft®, PureSafety® Validate training effectiveness through course-specific e-quizzes; log completions through Online, bar-coding, Mobile & batch upload Identify qualified employees by task based on training completion status Look to Key Performance Indicators so your business can avoid safety violations and injuries. Let me know what you think; send emails to info@thesafetypropodcast.com Find the podcast also on LinkedIn, Facebook, Instagramand Twitter

    Full show notes at the publisher

    048: Wearable Tech for Safety Sep 08, 2018
    Show notes

    In this takeover podcast episode, I visited the offices of Gensuite to talk about wearable tech and the impact it has on safety. Hit the links in these show notes for more info on the cloud-based EHS software solutions Gensuite can provide for your business. Join the over 600,000 users that trust Gensuite with their compliance and EHS software needs.

    Let me know what you think; send emails to info@thesafetypropodcast.com

    Find the podcast (and me!) also on LinkedIn, Facebook, Instagram, and Twitter


    046: What Are Industry Consensus Standards? Jul 21, 2018
    Show notes

    Powered by iReportSource

    Throughout OSHA regulations, you will find references to industry consensus standards such as those in Subpart I - Personal Protective Equipment. These PPE regulations refer to ANSI standards as the safety criteria manufacturers must meet when producing eye, face, head, and foot protective equipment. OSHA requires employers to purchase personal protective equipment that bears the ANSI mark to ensure that the equipment provides the maximum protection for the wearers.

    OSHA does not include industry consensus standards in the regulations; rather, it refers employers to various consensus standards as the safety procedures and specifications that must be met in the workplace. This referral procedure is called "incorporation by reference."

    Incorporation by reference was established by statute and allows Federal agencies to meet the requirement to publish regulations in the Federal Register by referring to materials already published elsewhere. The legal effect is that the material is treated as if it were published in full in the Federal Register and, like any other properly issued regulation, has the force of law.

    In some cases, OSHA may not incorporate by reference a particular industry standard, but it may hold employers to that industry-standard under the General Duty Clause of the OSH Act, recognizing that the industry-standard contains best practices the employer should use. For instance, ANSI/ISEA Z308.1, Minimum Requirements for Workplace First Aid Kits an Supplies, has not been adopted by OSHA. However, ANSI/ISEA Z308.1 provides detailed information regarding the contents and types of various first aid kits; OSHA has often referred employers to ANSI/ISEA Z308.1 as a source of guidance for the minimum requirements for first aid kits.

    Where an OSHA standard incorporates an old consensus standard, what is the significance of an updated industry consensus standard?

    Under OSHA's de minimis policy, where OSHA has adopted an earlier consensus standard, employers who are in compliance with the updated version will not be cited for a violation of the old version as long as the new one is at least equally protective.

    Remember, though, that where an OSHA standard incorporates an earlier consensus standard, the only way the OSHA standard can be changed to adopt the new version is through rulemaking. For example, OSHA's aerial lift standard references ANSI A92.2-1969. Even though ANSI A92.2 has been revised, the OSHA aerial lift standard continues to require only compliance with the 1969 standard. There is no automatic adoption of the more current industry consensus standard.

    Industry consensus standards are just that, a voluntary standardization system for private industry. They set conformity and uniformity criteria for the development and manufacture of a great volume of products. These criteria are developed by committees of qualified representatives from industry, labor, and government agencies. In many instances, U.S. consensus standards are adopted in whole or in part as international standards.

    Some organizations that publish consensus standards include:

    • American Conference of Governmental Industrial Hygienists;
    • American Society of Agricultural Engineers;
    • American National Standards Institute;
    • American Petroleum Institute;
    • American Society of Mechanical Engineers;
    • American Welding Society;
    • Compressed Gas Association;
    • National Fire Protection Association; and
    • Society of Automotive Engineers.

    Copies of the consensus standards may be purchased from the organization that issues them. OSHA's Docket Office and each regional office also maintain copies of the standards referenced in the regulations. These standards are available for public review at those offices.

    What is NIOSH?

    NIOSH, the National Institute for Occupational Safety and Health, is an agency separate from OSHA. NIOSH is part of the U. S. Department of Health and Human Services. NIOSH, also established by the OSH Act, is the research agency for occupational safety and health.

    What is ANSI?

    According to their website; As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.

    The Institute oversees the creation, promulgation and use of thousands of norms and guidelines that directly impact businesses in nearly every sector: from acoustical devices to construction equipment, from dairy and livestock production to energy distribution, and many more. ANSI is also actively engaged in accreditation - assessing the competence of organizations determining conformance to standards.

    And there you have it; a quick run-down on national consensus standards. Let me know what you think; send emails to info@thesafetypropodcast.com

    You can find me on LinkedIn! Post a LinkedIn update, letting me know what you think of the podcast. Be sure to @ mention Blaine J. Hoffmann or The SafetyPro Podcast LinkedIn page. You can also find the podcast on Facebook, Instagram, and Twitter.


    047: Machine Guarding Safety in 5 Easy Steps Jul 14, 2018
    Show notes

    Powered by iReportSource

    In almost all industries, we may work with or around machinery. Moving machine parts have the potential to cause severe workplace injuries, such as crushed fingers or hands, amputations, burns, or blindness. Safeguards are essential for protecting workers from these preventable injuries. Any machine part, function, or process that may cause injury must be safeguarded. When the operation of a machine or accidental contact could injure the operator or others in the vicinity, the hazards must be eliminated or controlled.

    OSHA's machine guarding standards apply to employers having employees exposed to dangerous moving parts.

    29 CFR 1910.212 — General requirements for all machinery. This is OSHA's general requirement for all machinery. It is a catch-all standard (like the General Duty Clause) requiring employers to protect employees from dangerous moving parts and to guard points of operation. OSHA also has some machine-specific standards, which you may need to know:

    29 CFR 1910.213 — Woodworking machinery

    29 CFR 1910.215 — Abrasive wheel machinery

    29 CFR 1910.216 — Mills and calendars in the rubber and plastics industries

    29 CFR 1910.217 — Mechanical power presses

    29 CFR 1910.218 — Forging machinery

    29 CFR 1910.219 — Mechanical power transmission apparatus

    Definitions you should know...

    • Fixed guard: A fixed guard is a permanent part of the machine. It is not dependent upon moving parts to function. It may be constructed of sheet metal, screen, wire cloth, bars, plastic, or any other material that is substantial enough to withstand whatever impact it may receive and to endure prolonged use. This guard is usually preferable to all other types because of its relative simplicity.
    • Interlock: When this type of guard is opened or removed, the tripping mechanism and/or power automatically shuts off or disengages, the moving parts of the machine are stopped, and the machine cannot cycle or be started until the guard is back in place. An interlocked guard may use electrical. mechanical, hydraulic, or pneumatic power or any combination of these. Interlocks should not prevent "inching" by remote control if required. Replacing the guard should not automatically restart the machine. To be effective, all removable guards should be interlocked to prevent occupational hazards.
    • Photoelectric (light) device: The photoelectric (optical) presence-sensing device uses a system of light sources and controls which can interrupt the machine's operating cycle. If the light field is broken, the machine stops and will not cycle. This device must be used only on machines which can be stopped before the worker can reach the danger area. The design and placement of the guard depend upon the time it takes to stop the machine and the speed at which the employee's hand can reach across the distance from the guard to the danger zone.
    • Point of operation: The point of equipment at which work, such as cutting, boring, or bending, is performed. With a few exceptions, the point of operation must be guarded.
    • Power transmission apparatus/device: The power transmission apparatus is all components of the mechanical system which transmit energy to the part of the machine performing the work. These components include flywheels, pulleys, belts, connecting rods, couplings, cams, spindles, chains, cranks, and gears.
    • Pullback: Pullback devices utilize a series of cables attached to the operator's hands, wrists, and/or arms. This type of device is primarily used on machines with stroking action. When the slide/ram is up between cycles, the operator is allowed access to the point of operation. When the slide/ram begins to cycle by starting its descent, a mechanical linkage automatically assures withdrawal of the hands from the point of operation.
    • Restraint: The restraint (hold-back) device utilizes cables or straps that are attached to the operator's hands and a fixed point. The cables or straps must be adjusted to let the operator's hands travel within a predetermined safe area. There is no extending or retracting action involved. Consequently, hand-feeding tools are often necessary if the operation involves placing material into the danger area.
    • Self-adjusting guard: The openings of these barriers are determined by the movement of the stock. As the operator moves the stock into the danger area, the guard is pushed away, providing an opening which is only large enough to admit the stock. After the stock is removed, the guard returns to the rest position. This guard protects the operator by placing a barrier between the danger area and the operator. The guards may be constructed of plastic, metal, or other substantial material. Self-adjusting guards offer different degrees of protection.
    • Two-hand control: The two-hand control requires constant, concurrent pressure by the operator to activate the machine. This kind of control requires a part-revolution clutch, brake, and a brake monitor if used on a power press. With this type of device, the operator's hands are required to be at a safe location (on control buttons) and at a safe distance from the danger area while the machine completes its closing cycle.
    • Two-hand trip: The two-hand trip requires the concurrent application of both the operator's control buttons to activate the machine cycle, after which the hands are free. This device is usually used with machines equipped with full-revolution clutches. The trips must be placed far enough from the point of operation to make it impossible for the operator to move his or her hands from the trip buttons or handles into the point of operation before the first half of the cycle is completed. The distance from the trip button depends upon the speed of the cycle and the band speed constant. Thus the operator's hands are kept far enough away to prevent them from being placed in the danger area prior to the slide/ram or blade reaching the full "down" position. To be effective, both two-hand controls and trips must be located so that the operator cannot use two hands or one hand and another part of his/her body to trip the machine.

    In general, you can use the following 5 steps to ensure safe machine operation in your workplace:

    1. Determine the types of machinery in the workplace. Then, determine if there is a machine-specific standard (e.g., 1910.213-.219), or if the equipment is covered under the "catch-all" guarding requirement of 1910.212. Follow the applicable standard.
    2. Provide one or more methods of machine guarding to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips, and sparks. Note: Some of the machine-specific standards prescribe specific safeguarding measures.
    3. Ensure the point of operation of machines is guarded.
    4. Ensure the necessary guards are affixed and secured.
    5. Anchor machines designed for a fixed location to prevent walking or moving.

    These basic steps will cover almost all of your machine guarding needs. Let me know what you think, send emails to info@thesafetypropodcast.com.

    Find the podcast also on LinkedIn, Facebook, Instagram, and Twitter


    Previous 1 14 15 16 17 18 21 Next

    Related Podcasts

    Making Sense with Sam Harris

    1

    Making Sense with Sam Harris Education
    Grammar Girl

    2

    Grammar Girl Education
    Good Life Project

    3

    Good Life Project Education
    Explain It to Me

    4

    Explain It to Me Education
    Team Never Quit

    5

    Team Never Quit Comedy
    Optimal Living Daily – Personal Development and Self-Improvement

    6

    Optimal Living Daily – Personal Development and Self-Improvement Alternative Health
    footer-logo

    Contact Us

    Toll Free: 844-670-7747

    Links

    • Home
    • Top Charts
    • Networks
    • Apps
    • Independents Podcasts
    • Podcast Advertising
    • Podcast News
    • Contact Us
    • About Us
    • Analytics & Insights

    Stay Connected

      Privacy, Terms of Use & Our Code of Ethics Protecting Content Creators Copyrights