Hackaday Podcast

Latest Episodes:

Ep100: Arduino Plays CDs, Virtual Reality in the 60s, and Magical Linear Actuators Jan 08, 2021

Show notes

Hackaday editors Elliot Williams and Mike Szczys kick off the first episode of the new year with the best hacks the internet has to offer. There's a deep dive into water-level sensing using a Christmas tree as an excuse. We ooh and ah over turning a CD-ROM drive into a CD player (miraculous tech of the previous century?). Do you have any use cases for ATtiny oscillator calibration registers? We look in on a hack that makes it dead simple to measure and set their values. The episode finishes up with a discussion of the constantly moving goal posts of virtual reality.

Ep099: Our Hundredth Episode! Denture Synth, OLED Keycaps, and SNES Raytracing Dec 24, 2020

Show notes

Hackaday editors Mike Szczys and Elliot Williams celebrate the 100th episode! It's been a pleasure to marvel each week at the achievements of awesome people and this is no different. This week there's a spinning POV display that solves pixel density and clock speed in very interesting ways. A macro keyboard made of OLED screens gives us a "do want" moment. And you can run a Raspberry Pi photo frame by sipping power from ambient light if you use the right power-tending setup. We wrap up the last episode of 2020 with a dive into ballpoint pens and solar racers.

Check the show notes!

Ep098: China's Moon Rocks, Antikythera Revelations, Creality vs Octoprint, and RC Starship Dec 18, 2020

Show notes

Hackaday editors Elliot Williams and Tom Nardi contemplate a few of the most interesting stories that made their way through the tubes this week. We'll learn how old VHS tapes can be turned into a unique filament for your 3D printer, and realize that the best way to learn about a 2,000 year old computer is to break out the hand drill and make one yourself. Hobby grade RC gear and a some foam board stand in for SpaceX's next-generation Mars spacecraft, and a manufacturer of cheap 3D printers attempts to undercut a popular open source project with hilarious results. Finally, we'll take a close look at some hidden aluminum boogers and discuss how China's history making trek to the Moon might be a prelude to the country making a giant leap of their own.

Read the show notes!

Ep097: We ♥ MicroMice, the Case of the Missing Drones, and 3D Prints Tested for Rocketry and Food Prep Dec 11, 2020

Show notes

Hackaday editors Mike Szczys and Elliot Williams round up the latest hardware hacks. This week we check out the latest dead-simple automation -- a wire cutting stripping robot that uses standard bypass strippers. Put on your rocket scientist hat and watch what happens in a 3D-printed rocket combustion chamber. Really small robots are so easy to love, this micromouse is the size of a coin. And whatever happened to those drone sightings at airports? We talk about all that, and round up the episode with Hyperloop, and Xiaomi thermometers.

Read the show notes!

Ep096: Diaphragm Engine, DIY Dish Washer, Forgotten Soviet Computers, and a Starlink Teardown Dec 04, 2020

Show notes

Hackaday editors Elliot Williams and Mike Szczys discuss the latest and greatest in geeky goodness. This week we saw a Soviet time capsule come to light with the discovery of a computer lab from a building abandoned in the 1990's. A two-cycle compressed air engine shatters our expectations of what is involved in RC aircraft design. There's a new toolkit for wireless hacking on the scene in the form of a revitalized HackRF PortaPack firmware fork. And what goes into dishwasher design? Find out in this exciting episode.

Read the show notes!

Ep095: Booting FreeDOS from a Vinyl Record, Floating on Mushrooms, and Tunneling Through a Living Room Nov 27, 2020

Show notes

In this short Thanksgiving episode, Hackaday editors Mike Szczys and Elliot Williams are talking turkey about the world of hardware hacking. We've still got news updates about the Nintendo Game and Watch hacking progress, the sad farewell to Areceibo, the new chip from Espressif, and the awesome circuit sculptures from our recent contest. We wrap up the show with a lightning round of quick hacks.

Ep094: Fake Sun, Hacked Super Mario, Minimum Viable Smart Glasses, and 3D Printers Can't Do That Nov 20, 2020

Show notes

Hackaday editors Elliot Williams and Mike Szczys traverse the hackerscape looking for the best the internet had to offer last week. Nintendo has released the new Game & Watch handheld and it's already been hacked to run custom code. Heading into the darkness of winter, this artificial sun build is one not to miss... and a great way to reuse a junk satellite dish. We've found a pair of smartglasses that are just our level of dumb. And Tom Nardi cracks open some consumer electronics to find a familiar single-board computer doing "network security".

https://hackaday.com/2020/11/20/hackaday-podcast…ers-cant-do-that/

Ep093: Hot and Fast Raspberry Pi, Dr. Seuss Drone, M&M Mass Meter, and FPGA Tape Backup Nov 13, 2020

Show notes

Hackaday editors Mike Szczys and Elliot Williams wrangle the epic hacks that crossed our screens this week. Elliot ran deep on overclocking all three flavors of the Raspberry Pi 4 this week and discovered that heat sinks rule the day. Mike exposes his deep love of candy-coated chocolates while drooling over a machine that can detect when the legume is missing from a peanut M&M. Core memory is so much more fun when LEDs come to play, one tiny wheel is the power-saving secret for a very strange multirotor drone, and there's more value in audio cassette data transfer than you might think -- let this FPGA show you how it's done.

Ep092: Orbital Data by Mail, Human Flight on Styrofoam Wings, and Seven Shades of E-Ink Nov 06, 2020

Show notes

Hackaday editors Elliot Williams and Mike Szczys catch the best hacks you may have missed. This week we look at the new Raspberry Pi 400, use computer vision to get ready for geeky Christmas, and decypher a negative-space calendar. We get an answer to the question of what happens if you scale up a styrofoam airplane to human-size. Facebook is locking down VR headset, will hackers break them free? And take an excellent stroll down memory lane to find out what it was like to be a space-obsessed ham at the dawn of personal computers.

https://hackaday.com/2020/11/06/hackaday-podcast…-shades-of-e-ink/

Ep091: Louisville Exploder, Generating Japanese Joinery, Relay Retrocomputer Rally, and Chop the Robopup Oct 30, 2020

Show notes

Hackaday editors Mike Szczys and Elliot Williams dig through the greatest hacks that ought not be missed this week. There's a wild one that flexes engineering skills instead of muscles to beat the homerun distance record with an explosively charged bat. A more elegant use of those engineering chops is shown in a CNC software tool that produces intricate wood joinery without needing an overly fancy machine to fabricate it. If your flesh and blood pets aren't keeping up with your interests, there's a new robot dog on the scene that far outperforms its constituent parts which are 3D-printed and of the Pi and Arduino varieties. And just when you thought you'd seen all the craziest retrocomputers, here's an electromechanical relay based machine that took six years to build (although there's so much going on here that it should have taken sixteen).

Show notes: https://hackaday.com/?p=444464

Our TOPPODCAST Picks

Follow Us

Stay Connected

Related Podcasts

Links

Stay Connected