TopPodcast.com
Menu
  • Home
  • Top Charts
  • Top Networks
  • Top Apps
  • Top Independents
  • Top Podfluencers
  • Top Picks
    • Top Business Podcasts
    • Top True Crime Podcasts
    • Top Finance Podcasts
    • Top Comedy Podcasts
    • Top Music Podcasts
    • Top Womens Podcasts
    • Top Kids Podcasts
    • Top Sports Podcasts
    • Top News Podcasts
    • Top Tech Podcasts
    • Top Crypto Podcasts
    • Top Entrepreneurial Podcasts
    • Top Fantasy Sports Podcasts
    • Top Political Podcasts
    • Top Science Podcasts
    • Top Self Help Podcasts
    • Top Sports Betting Podcasts
    • Top Stocks Podcasts
  • Podcast News
  • About Us
  • Podcast Advertising
  • Contact
Not in our directory?
Add Show Here
Podcast Equipment
Center

toppodcastlogoOur TOPPODCAST Picks

  • Comedy
  • Crypto
  • Sports
  • News
  • Politics
  • True Crime
  • Business
  • Finance

Follow Us

toppodcastlogoStay Connected

    View Top 200 Chart
    Back to Rankings Page
    Hobbies

    Foundations of Amateur Radio

    Starting in the wonderful hobby of Amateur or HAM Radio can be daunting and challenging but can be very rewarding. Every week I look at a different aspect of the hobby, how you might fit in and get the very best from the 1000 hobbies that Amateur Radio represents. Note that this podcast started in 2011 as “What use is an F-call?“.

    Advertise

    Copyright: ℗ & © 2015 - 2020 Onno Benschop

    • Apple Podcasts
    • Google Play
    • Spotify

    Latest Episodes:
    Simplicity among the complexity ... Sep 20, 2020
    Show notes

    Foundations of Amateur Radio

    My radio shack consists of two radios, identical, well, in as much as that they're the same model, a Yaesu FT-857d. Their memories are different, their microphones are different, but both of them are connected via a coaxial switch to the same VHF and UHF antenna. One of them is also connected to a HF antenna.

    Let's call these two radios alpha and bravo.

    Alpha is used to host F-troop and play on the local repeater. Bravo is used to do HF stuff. It's also connected to a computer via a serial cable, called a CAT cable, Computer Assisted Tuning, but really, a way to control the radio remotely.

    The audio output on the rear of the radio is also connected to the computer.

    These two connections are combined to provide me with access to digital modes like PSK31, WSPR and SSTV, though I haven't actually yet made that work. The computer itself is running Linux and depending on what I'm doing on the radio some or other software, often it's fldigi, a cross-platform tool that knows about many different digital modes.

    The computer is also connected to the Internet via Wi-Fi, and is used to see what various reporting websites have to say about my station, things like propagation, the DX cluster, an electronic way of seeing what other stations can hear, then there's solar radiation information and other neat tools.

    This shack is pretty typical in my circle of friends. I'm lucky enough to have a dedicated table with my shack on it, for others they're lucky to have a shelf in a cupboard, or at the other end of the spectrum, a whole room or building dedicated to the task.

    The level of complexity associated with this set-up is not extreme, let's call it in the middle of the range of things you can add to the system to add complexity.

    In case you're wondering, you might consider automatic antenna switching, band switches, band filters, amplifiers, more radios, audio switching, automatic voice keyers. If you look at the world of Software Defined Radio, the hardware might include many of those things and then add a computer that's actually doing all the signal processing, making life even more complex.

    At the other end of the complexity scale there's a crystal radio.

    As I've been growing into this field of amateur radio it's becoming increasingly clear that we as a community, by enlarge, are heading towards maximum complexity.

    There's nothing wrong with that as such, but as a QRP, or low-power operator, I often set-up my radio in a temporary setting like a car or a camp site. Complexity in the field is not to be sneezed at and I've lost count of the number of times where complexity has caused me to go off-air.

    It occurred to me that it would be helpful to investigate a little bit more just what's possible at the other end of the scale, at the simple end of complexity if you like.

    So, I'm intending, before the year is out, supplies permitting, to build a crystal radio from scratch. I realise that I have absolutely no idea what I'm getting myself into, no doubt there will be more complexity that I'm anticipating, but I'm getting myself ready to build something to be able to look at it and say to myself, look, this is how simple you can get with radio.

    I'm currently too chicken to commit to making the simplest - legal - transmitter, but if you have suggestions, I'll look into it.

    Just so you know, simplicity is an option.

    I'm Onno VK6FLAB


    Yak Shaving ... Sep 13, 2020
    Show notes

    Foundations of Amateur Radio

    Yak Shaving ...

    Not every adventure gives you an outcome. Today started with reading a thank-you email from a listener who shared their activities and wanted to express their gratitude for encouraging them to get on air and make noise.

    That in turn prompted the question on the country of origin of that listener and did I know where all my listeners were? For the past few hours I've been attempting to answer that seemingly simple question.

    Aside from using the opportunity to make an attempt at mapping the distribution of amateurs in Australia, which on the face of it is a trivial exercise, consisting of extracting the postcode from each registered amateur and then putting those on a map.

    Only the postcodes are not actually single points. They're boundaries defined by Australia Post and they're copyrighted. Not only that, they change. To access them, you have to pay the Post Office. If you want to combine a postcode with a population density, so you can see where amateurs are represented and at what level, you go to the Australian Bureau of Statistics for a population density data-set. At that point you realise that the Bureau uses standardised regions. Mesh-blocks at the smallest end of the scale are essentially the size of 30 to 60 households. The Bureau uses these as the fundamental size for all its statistics.

    When you attempt to map this onto postcodes you learn that there isn't a one-to-one mapping and even if there was, it would change every time Australia Post changed a postcode boundary.

    I will note that this is all by way of a side-street in my investigation. I wondered how amateur radio is distributed across the country and I didn't want to end up with essentially a population density map, more people means more amateurs, I wanted to see where amateur radio had the potential to affect more people because there are more of them in a group.

    Anyway, then I attempted to look at the podcast downloads and map those to countries. I use AWS CloudFront to make the podcast available, so it gets to the user, you, quicker. The logs show which data-centre a request is handled by. Then I needed to map a data-centre to an airport code, look that up in a database so I could extract the country, then count how many requests were made per country.

    Then I started doing that across time, so you can see how that changes over time.

    At this point I still don't actually have a map to show.

    While all this was happening, my computer started running low on disk-space, not because I'd just downloaded some data from the Australian Bureau of Statistics, but because some rogue process was writing a log somewhere, so I spent an hour looking for what process that was, killing it and removing the superfluous log file.

    If this sounds familiar, there's a name for it. Yak shaving. It's originally named after a Ren and Stimpy episode called "Yak Shaving Day". Essentially you do a whole lot of unrelated activities in the pursuit of the actual activity, essentially a string of dependencies that distract you from the end-goal. In my case, trying to answer which countries are represented within my audience.

    Why am I not using an amateur radio example?

    Two reasons.

    This is amateur radio. For me. Doing charts, wrangling data, massaging stats, finding answers and presenting those are an integral part of the hobby, to me. Just like making this podcast, contributing to discussion, reading and learning. All part of the mix.

    Second reason is that I wanted to illustrate this with something that wasn't immediately obviously linked to the hobby for most people. A more amateur example might be wanting to go and operate portable, attempting to locate you battery, when you find that it's not charged, so you go looking for the charger which you find has a broken connector, so you drive to the electronics store to get the connector when you run out of petrol, so you pull over, get out of the car and trip over the curb and end up in hospital emergency waiting for a doctor to see you. If you think that's far-fetched, I know an amateur who ended up in hospital from yak-shaving.

    We've all had days like that.

    The idea is that any day that you are on the right side of the earth, doing something you love is a good day.

    Regardless of the end result, this is a hobby after all.

    I'm Onno VK6FLAB


    What is so different about using software for signal processing? Sep 06, 2020
    Show notes

    Foundations of Amateur Radio

    In my ongoing software explorations I've discussed that Software Defined Radio or SDR is a fundamentally different way of dealing with radio. It's been in use across non-amateur circles for decades. Your mobile phone has an SDR on board for example.

    The original term of "digital receiver" was coined in 1970, "software radio" was coined in 1984 and in 1991 Joe Mitola reinvented the term "software radio" for a planned mobile phone base station.

    So, this idea has been around for half a century and in amateur radio this idea is also catching on. You can buy a few pure SDR devices today, some hybrid ones, or you can begin to experiment in a more indirect manner using your traditional radio and a computer.

    One of the things that sets this idea of a software defined radio apart from anything we've done so far is that the bulk of the signal processing is done in software. That sounds obvious, but it's really not.

    One of the impacts of this idea is that you can improve your radio communications by either writing better software, or by using a faster computer. Unless you write software for a living, these things aren't immediately obvious, so let me explain.

    Imagine that you've written software that detects beeps in a particular slice of audio spectrum that's being fed to your application. As you write better software to detect those beeps, you get a better digital mode, one with a better chance of being decoded, or using radio terms, it has a better signal to noise ratio.

    If that's not a familiar term, signal to noise ratio is the a measure that describes the difference between a wanted signal and the background noise. Higher signal to noise means that you can better distinguish between the two.

    If you stand in a room full of people talking and you use your hands to cup your ears towards the person you want to hear, you've increased the signal to noise ratio and your chance of understanding them has improved.

    As you write this software, it gains complexity. As you deal with more maths, more samples, more tests, you end up running out of time to make your decoder return a relevant answer. There's no point in having a real-time signal being decoded late. If it were to take say 10 seconds to decode 1 second of audio, then the next second would be 20 seconds late and the one after that would be 30 seconds late.

    That's where a faster computer comes in.

    If you have the ability to do more maths, or do the same maths at a higher resolution, you will essentially improve the reception of your radio without ever needing to change your antenna or anything on the circuit board.

    Think of it in another way.

    Imagine that your tool has access to 2.3 kHz of audio. It's the equivalent of a Single Side Band audio stream. If you break that down into 23 chunks of 100 Hz each, you can deal with the average of 100 Hz of audio for each calculation. If you have a faster computer, you might be able to break that down into 230 chunks of 10 Hz each, or 2300 chunks of 1 Hz. So instead of doing calculations across 23 chunks of audio, you're doing it across 2300 chunks.

    Why is this significant you might ask?

    Well, in a traditional radio you get one bite at the cookie. You get to design and build your circuit and then package it and sell it. The end result is something like my FT-857d. It does what it does well, but it will never get any better.

    However, if I plug that same radio into my computer, I can extract the audio and do stuff with it. If I get a faster computer, I can do more stuff. I don't have to change my radio, or my antenna, or even my shack. Most of the time I run a different application and I get a different result.

    I will point out that I'm deliberately ignoring where and how the RF gets to the computer, or where that computer actually is, or what operating system it's running, since none of those things matter to get an understanding of how changing software can change the performance of your radio.

    I've said this before and I'll say it again: "The SDR earthquake will change our hobby forever"

    Before I go. I'm not for a minute suggesting that your current radio is obsolete. If it were legal, a spark-gap transmitter could still exchange information today, but if you want to explore what might be just over the horizon, going down the SDR path by connecting your radio to your computer is a really nice place to start.

    I'm Onno VK6FLAB


    When you run into a pounce ... Aug 30, 2020
    Show notes

    Foundations of Amateur Radio

    Contesting is a fun way to learn about amateur radio. It tests your skill, your station, your patience and your ability to change approach at a moments notice. For those reasons alone it's an activity that I recommend you have a go at.

    For me it's also about self-improvement. With each contest, can you make better use of your station, can you learn more about your radio, about bands, about conditions and ultimately become a better operator. I know that there are individuals who keep telling me that giving out signal reports of 5 and 9 isn't helpful, to them I say, try it in a contest setting and see what else you learn.

    When you start out contesting you'll quickly come across two terms, technically three, that need some explanation. The terms are Run, Search and Pounce, though the last two come as a matched pair.

    The essential bit of information is that when you're on a Run, or Running, you're calling CQ and responding to other stations. You essentially sit on a frequency for a bit, start calling CQ and hope that others hear you and start to gather around to make contact with you.

    The other side of that is Search and Pounce, or searching on a band for a station you want to talk to and pouncing into a gap when you can.

    The two methods are mirror images of each other, so one station is generally running whilst the stations calling in are searching and pouncing.

    Doing this in a contest setting requires slightly, some might say subtle, differences.

    Let's investigate a contest RTTY contact. I'll simulate it between myself, VK6FLAB and Matt, VK6QS. I'll add that this is done in text in a RTTY contest, rather than voice, and, this exact exchange didn't actually happen, but for different reasons which I'll get into shortly.

    It goes a little like this.

    My station transmits: CQ TEST VK6FLAB VK6FLAB CQ Matt responds: VK6QS VK6QS VK6QS I reply: VK6QS 599 010 010 Matt replies: 599 032 032 And I finish off with: TU CQ VK6FLAB

    Now this is the ideal contact, nothing extraneous, no duplication, nothing about having to repeat yourself. Mind you, if you're getting picky, you might notice that we're both sending our exchange twice, in my case 010, Matt is sending 032.

    If you look closer you'll notice that all pertinent information is sent at least twice because it turns out that unlike a keyboard on a computer connected to a screen, what you type in RTTY might not actually get to the other end if you're using HF radio.

    My three transmissions are the one where I call CQ, the one where I say Matt's callsign plus the exchange and the one where I say TU or Thank You, and move on. Those are the run calls.

    Matt's calls consist of his callsign, and his exchange.

    Note that Matt doesn't say my callsign, since I already know it and I'm running and he's searching and pouncing. He should already know who I am before he transmits. If he were to add my callsign, that would just slow things down. This is a way to keep things moving along.

    In fldigi, I can program a function key that does each of those five calls. You click on a callsign, push the appropriate button and magically you're either running or pouncing. There's also a button for asking for a repeat, or "AGN?, AGN?" and one for making a log entry, which you can combine into the final thank you for running, but it's needed separately if you're pouncing.

    I did say that this exchange didn't actually happen and you might well wonder why I shared it with you.

    Simple. This is the bare-bones of what's required. Everything else is extra in case things break down. If there are multiple stations on the same frequency, or if your levels aren't quite right and the decoder is having a hissy fit, the human in the chain, you, need to do something manually. Very much like when you're dealing with a voice pile-up and there's this one station calling over the top of everyone else and drowning out whomever you actually want to talk to.

    In a contest setting there's plenty of opportunity to do both running and pouncing and you should. If you're running on a dead band you won't know because you're getting old calling CQ, but if you're searching on that same band you'll figure out pretty quick that there's nothing happening.

    Similarly, you might have a desirable callsign or location and find that running is more effective in making contacts than searching and pouncing.

    Whatever mode of contesting you choose, make sure that you're flexible, since band conditions change from second to second and you will need to adapt to the winds of change. A lot like when you learn to sail and find out that you cannot just hold the helm in one spot for the entire time.

    I will note that the ideal RTTY contact that I've outlined isn't universal. There's plenty of debate about the most effective way to go about things. I started with what I knew about making voice contacts, shamelessly copied the RTTY macros from another amateur and used them as a basis to learn what I needed and what I didn't, and because this was my first actual RTTY contest I watched several YouTube videos, rather than hear actual contesting stations on the air, which is something I recommend you do to get a feel for what's going on.

    Contesting can be a way of life, or it can be just plain fun with learning thrown in.

    I'm Onno VK6FLAB


    After channelling your RTTY ... Aug 23, 2020
    Show notes

    Foundations of Amateur Radio

    It's the morning after the day before. I've been calling CQ for 24 hours and for the first time in my life after a contest I still have my voice. That in and of itself is novel. I also don't have ringing ears, that's a blessing. I have learnt heaps and had fun doing it. I made contacts and I heard stations across the globe and I did it all from the comfort of my shack chair.

    Before I dig in and expand, the contest I just completed ran for 24 hours. I didn't sit at my radio for all of it, nor was my radio on for all of it. I managed to have lunch, dinner, desert, breakfast and morning tea. I snuck in a few naps and I managed to help with bringing in the shopping. My station did not transmit unattended at any time in case you're wondering.

    My setup consisted of a little 11 year old netbook computer running the current version of Debian Linux and the heart of this adventure, the software called fldigi. The computer is connected to my Yaesu FT-857d via three cables, well, two and a half. A microphone and a headphone lead that combine into the data port in the back of the radio. The other cable is a USB CAT cable, a Computer Assisted Tuning cable, that plugs into the CAT port on the back of the radio. I also used an external monitor to have my main contest screen on and used it to display the main fldigi window.

    My license class allows me access to a selected number of amateur bands, 80m, 40m, 15m, 10m, 2m and 70cm. I managed at least one RTTY contact on each band.

    As I described previously, my radio is set to use Single Side Band and the audio from the radio is fed via the microphone socket on the computer into fldigi that processes the information. Similarly, when I transmit, the audio is generated via fldigi and leaves the computer via the headphone socket and goes into the radio as a Single Side Band audio signal.

    The information in the audio is all RTTY, a digital mode that I've described previously. The software is using Audio Frequency Shift Keying, AFSK, simulating the switching between the two RTTY frequencies.

    On my screen I have a waterfall display that shows all the signals that are happening within the 2.3 kHz audio stream that's coming from the radio. Fldigi is also decoding this in real-time and showing each decode as a virtual channel in a list. Click on a channel entry and your next transmission will happen at that frequency.

    If you've ever used WSJT-X this will sound very familiar.

    That's the mechanics of what I've been doing.

    So, what did I learn in this adventure?

    Well, most of Australia goes to sleep at night, at least the ones that do RTTY. I have evidence of exactly one station on-air, and that was only because they were named in the DX Cluster, which by the way this contest allows as assistance. Since then I've found logs from at least two more stations.

    Local contacts did happen during the more civil hours and in total I managed ten of them. You may think that's not much for say 12 hours of work, but that's 5 Watts QRP, or low power, RTTY contacts, in an actual contest, on a new antenna, from my shack, dodging thunderstorms and learning to use filters and levels.

    You might not be impressed, but I'm absolutely stoked!

    During the midnight-to-dawn run, on 40m, when there were double points to be had, which I missed out on, I did manage to hear several stations across Europe, 14,000 km away, which means that I can pretty much count on global coverage with my current setup. Sadly they didn't hear me, too many competing stations, but I'm sure that with practice I'll manage to contact them too.

    The software crashed once. That's not nice. It seems to have a habit of corrupting one of the preference files, which prevents it from starting up. That's also not nice. I hasten to add that I don't yet know the source of this. It may well be a dud-hard-disk sector on my ancient laptop, rather than the software, so I'm not assigning blame here.

    Getting started with fldigi is an adventure. It's not point-and-click, nor plug-and-play, more like running a mainframe whilst cranking the handle, but when you get it to fly there's lots to love about this tool.

    Other things that worked well were that I'd spent some preparation time getting the keyboard macros right. These are pre-defined bits of text that you send as you're calling CQ and making a contact. They're a whole topic in and of themselves, so I'll skip past the detail and just mention that I was very happy with the choices I made, gathered from years of voice-only contacts, reading RTTY contest information and looking for exchange details.

    From a technical perspective, I used both contest modes, "Running" and "Search and Pounce". Running is when you call CQ, Pouncing is when they call CQ. The running was by far the most successful for me. I'm not yet sure if that was a reflection on how much I still have to learn about levels.

    One thing that I can say with confidence is that there's absolutely nothing like having a wall of RTTY signals to learn how to make sure you're actually decoding something useful. I spent a good couple of the wee hours tuning my levels.

    I would like to thank the stations who came back to my call and for those who tried without me noticing them.

    I had a blast.

    I'm Onno VK6FLAB


    Channelling RTTY Aug 16, 2020
    Show notes

    Foundations of Amateur Radio

    When you start playing with radio your first interaction is likely to be voice. It could be SSB, AM, FM or something more recent like FreeDV or DMR. Your next challenge is likely going to be a digital mode like Morse Code, Radio Teletype or my recommendation for your first adventure, WSPR or Weak Signal Propagation Reporter.

    I've previously discussed WSPR, today I would like to look at Radio Teletype or RTTY. It's a digital mode that allows you to send and receive free-form text. It's a mode with a long and illustrious history and it's a good next step after WSPR.

    The way it works is that using an alphabet made up from two tones, information is transmitted, one character at a time at a specific speed. The code that describes the alphabet is called the Baudot code, invented by Jean-Maurice-Emile Baudot in 1849. In computing terms it's a 5-bit alphabet and in amateur radio it's traditionally sent at 45.45 baud or bits per second, in case you're wondering, named after the very same man.

    The two tones have names, a Mark and a Space and they're a set distance apart. In amateur radio, they're separated by 170 Hz but there are plenty of other frequencies and speeds in use. In amateur radio the standard Mark and Space frequencies are 2125 Hz and 2295 Hz.

    In a traditional RTTY capable radio the two tones are generated by transmitting a carrier whilst switching the transmitter frequency back and forth, called Frequency Shift Keying or FSK. Think of it as having a Morse key that sends dits on one frequency and dahs on another, having the radio change frequency whilst you're keying.

    If you use this method to create and decode RTTY by switching between two frequencies, your radio can generally only deal with one RTTY signal at a time, just the one you're sending and just the one that's being received. Receiving is generally achieved by showing some indication on your radio how close you are to the Mark and Space frequencies that you're trying to receive and decode.

    Another way to make a RTTY signal is to use sound. If you alternately whistle at 2125 Hz and 2295 Hz and you do it at 45.45 bits per second, you're also generating RTTY. This technique is called Audio Frequency Shift Keying or AFSK. Think of it as using audio to simulate the shifting of frequency by transmitting two alternating tones.

    There is a fundamental difference between the two. Before I explain, permit a diversion. It's relevant, I promise.

    If you've ever spoken on the radio using SSB you might have noticed that if two stations are transmitting at the same time you get both signals. With a little practice you can even understand both. This isn't true for every radio mode. If you use FM, the strongest signal wins and if you use AM, you get a garbled beep from two stations being on slightly different frequencies. As an aside, this is why aviation uses AM, so any station not transmitting can hear that two stations doubled up.

    Back to RTTY.

    If you use audio to generate the two RTTY carriers, rather than shift frequency, you can deal with as many as you can fit into an SSB audio signal, as long as the Mark and Space for each station are 170 Hz apart you can have as many stations as you want, overlapping even. As long as your software knows what to do with that, you'll be able to decode each one at the same time, since they're essentially multiple SSB signals being transmitted simultaneously.

    An added bonus is that you don't have to invest in an SDR to play with this. You can use an analogue radio, like my FT-857d, and use software to generate an audio RTTY signal with all the benefits I've just mentioned. The magic is in the software you use to do the decoding.

    As it happens, I'm about to do a contest using RTTY and I'll let you know how that goes using my radio, a computer and a piece of software called fldigi. I'll be following in the footsteps of the first ever RTTY contest, held in the last weekend of October in 1953 and organised by the RTTY Society of Southern California. In as much as I'm following in the footsteps of Morse code by spark-gap.

    Wish me luck.

    I'm Onno VK6FLAB


    How much do you really know about your radio? Aug 09, 2020
    Show notes

    Foundations of Amateur Radio

    When I came across amateur radio nearly a decade ago I did a course, passed my test and got licensed. At that point I didn't have any equipment, didn't know about any, hadn't touched anything, other than the radio in the classroom, and had no idea about what to buy and how to choose.

    So, instead I asked the friend who introduced me to the hobby, Meg, at the time VK6LUX, what radio to get. I asked her what was the second radio she ever got because I figured that I'd get very disappointed with the first one in short order. She explained that there were plenty of brands to choose from and that each had their own champions. Just like the perennial choice between Ford and Chevrolet, Apple vs Microsoft, Tea vs Coffee, you'd end up with one radio and be told by someone in a different camp that you chose the wrong one.

    Her advice, which is just as solid today as it was a decade ago, was to buy something that people you knew had, so whilst you're learning there'd be someone nearby who could help. As a result I bought a Yaesu FT-857d for precisely that reason. I still have it and it has a sister, another FT-857d, bought when I needed to broadcast the local news when one of the local volunteers went on holiday.

    For most beginners their journey is similar. They buy their first radio and generally that sets the tone for what comes next.

    In the decade that I've been around amateur radio I've had the opportunity to play with about 30 or so different radios. For some that playing consisted of picking up the microphone and making a QSO, a contact, and not much else. For others it consisted of sitting with the radio for a full contest, 48 hours, with sporadic sleep, dealing with pile-ups where there wasn't time to breathe, but plenty of stuff to learn about filtering.

    Then there were the radios that came to my shack for a visit, those at various clubs and plenty of outings where I was able to sit down and figure out how stuff works.

    On the surface that's all fine and dandy. A radio is a radio, you pick up the microphone and hit go, off to the races. Then you need to figure out how to set the volume, change frequency, change bands, read what the mode is and how to change it, tune the thing, set up a filter, change the pre-amp, operate split.

    For some radios this was easy, consisting of a channel button and a microphone push to talk, for others there were no buttons, just a big Ethernet socket, then there were the radios with a hundred buttons, some so small that you missed them on first glance. I've used solid-state radios, valve radios, software defined radios and virtual radios, each with their quirks and idiosyncrasies.

    Every time I operate a new radio I learn something about that radio, but I also learn something about my own radio. I can begin to hear differences, observe how easy or hard it is to do something, a missing feature on my own radio, or the one I happen to be operating at the time.

    In my travels I've seen plenty of radio amateurs who only have a passing understanding of their own radio, let alone any other radio.

    I completely respect that this might be enough for you, but I'd like to point out that this might be a missed opportunity.

    I remember vividly sitting in the middle of a bush-camp with my own radio powered by a battery connected to a hap-hazard dipole antenna strung between two trees attempting to hear a station discussing her global circumnavigation by sailing boat and being frustrated with my ability to make it work.

    A friend who was sitting nearby asked if they could have a go and within seconds he was able to use the filters and offsets to make the station pop out of the noise. It's with the image of Kim VK6TQ in mind, the person who knew my radio better than I did, that I'd like to urge you to play with any radio you come across, no matter how trivial or different.

    One day it will mean the difference between making a contact or not.

    I'm Onno VK6FLAB


    First Digital DX contact! Aug 02, 2020
    Show notes

    Foundations of Amateur Radio

    The other day day I managed my first DX contact using a new mode, FT8. It wasn't very far away, all of 2600 km or so, but it evoked memories of my first ever on-air DX contact nearly a decade ago. I should say thank you to YD3YOG for my 15m contact, fitting because my first ever was also on 15m as I recall. Unfortunately I never did log my first.

    Recently a friend asked me how the two compared.

    15m and logging aside, there's a lot of similarities, even though I'm a more experienced operator today when compared to when I made my first ever contact.

    The preparation and the building anticipation is what made the contact all the sweeter.

    A while ago I managed to connect the audio of my radio to a computer. This is pretty much the first step in starting to use digital modes. Essentially many common digital modes use an SSB transmission to generate and receive audio that in turn contains digitally encoded information.

    There are hundreds of modes like this, from PSK31 to RTTY, WSPR, FT8, SSTV and many more. If you've not yet dabbled in this area, I'd recommend starting with WSJT-X. The software is so far the best tool I've found to make sure that your digital levels are correct and offers several popular modes to see how your station is operating. If you're asking for a first mode recommendation, I'd start with WSPR. Just do the receive part first, then work on from there.

    There are many tutorials available, some better than others, so if the one you find doesn't float your boat, keep looking. A fly-over view is that there are several things that you need to get working and if they don't all work together, you'll get no result.

    Obviously you'll need to install the software, but that's not the whole story. For the software to be able to control your radio, change bands, frequency and set-up things like split operation, you'll need to set-up the hardware to do this, in my case a CAT cable between the radio and the computer. You'll also need to set-up control software that knows how to talk to the hardware. In my case that's Hamlib on Linux, but it could be Hamlib or flrig on MacOS or something like OmniRig on your Windows machine.

    The purpose is to control the radio. When you're troubleshooting, keep that in mind, hardware plus software need to work together to control the radio and this is before you actually do anything useful with the radio.

    Then you need to have both hardware and software to have audio go between the computer and the radio. In my case the headphone and microphone connectors on my computer are connected to the data port on the back of the radio. If your computer doesn't have access to sockets you might need to use a USB sound-card. If your radio doesn't have an easily accessible port, you might need to have an interface.

    The computer software in this case is likely setting the volume levels using the audio mixer in your operating system.

    I will add that some radios have a USB socket on the back that combines both CAT control and audio. The principle though is the same. You need to make the CAT interface work, which is essentially a serial connection, and you need to make the audio work, which is essentially a sound-card.

    Nothing else will make sense until you've managed to make those two work.

    Then, and only then, can you try to launch something like WSJT-X, point it at the various things you've configured, then you can actually start decoding signals.

    For WSJT-X to work properly, there's one more thing. An accurate clock is required. Likely you'll need to use a piece of software that knows how to synchronise with something called NTP or Network Time Protocol. The simplest is to point your clock tool at a time-server called pool.ntp.org which will get you global time coverage. Each operating system does this differently, but getting it right is essential before WSJT-X will actually make sense. You can visit time.is in a web browser to see how accurate your clock currently is.

    So, get computer control of your radio working, get audio working, set the clock, then you can run WSPR, FT8, JT65 or any other mode.

    I will note that I'm not attempting to give you specific computer support here, just an overview of what's needed before anything will work.

    If you've been contesting then CAT control might already be operational. If you've been using a computer voice-keyer, then audio might also be ready. Depending on where you are on your digital journey, these steps might be complicated or trivial.

    Once you've done all that you can start doing things like figuring out where satellites are or how to talk to the International Space Station, or use Fldigi to make a PSK31 contact or send a picture using SSTV or decode a weather fax.

    When you've made that first digital DX contact, I'm sure that you too will have a sense of accomplishment!

    I'm Onno VK6FLAB


    What do you talk about? Jul 26, 2020
    Show notes

    Foundations of Amateur Radio

    When was the last time you told anyone anything about your hobby? What about someone who isn't also an amateur?

    Have you ever considered why there is a perception that our hobby is dying, why it's running out of people, why we struggle to get air-time in mainstream media, why attracting new members is hard and why there is a very narrow range of understanding about what our hobby is, what it does and how it's relevant in the world today?

    I'm a radio amateur. So are you. You might not be licensed yet, but the fact that you're here right now indicates a willingness to understand and learn, to participate and question.

    Those qualities are the fundamental building blocks that make up a radio amateur.

    I'm also a self-employed computer consultant, a radio broadcaster, an interviewer, a software developer, a public speaker, a blogger, author, publisher and a partner. My friends include people who are process managers, astronomers, gynaecologists, mariners, tow truck drivers, communications technicians, volunteer fire-fighters, business owners, employees, retirees, fathers, mothers, old, young and everything in between. Radio Amateurs one and all.

    When you sign up to be an amateur, you don't give up all the other things you are. You don't stop being a member of society, you just add in another box marked radio amateur and you get on with your life.

    If you get into this hobby you begin to realise that it sneaks into everyday life all the time. You use it to figure out how something works, or explain why it doesn't, you use it to trace a circuit or to plug in your new surround sound system. You use it to encourage curiosity in your children and to talk to your grand-children. It's not an add-on, it's part of who you are.

    That's always been the case, but the perception in the general public has not been like that, it's been based around the idea that being a radio amateur is being special, being separate, being knowledgeable, studied, licensed. The reality is that the world we live in is more connected than ever and the things we once did in isolation are now part of mainstream life.

    There is a perception that amateur radio is dying. Articles describe how we need to attract more people, how we need to appeal to children, how we need to recruit, become sexy or relevant. There's discussion about what's broken in the hobby, how we need to fix it.

    I think that none of those things are what's in need of investigation. I think it's us. You and I. I think we need to stop being shy about being a radio amateur, about what we do and why we enjoy it; what it means and how it works.

    When you talk about your activities of the day, if you made a rare contact with Tuvalu, or managed to connect your computer to your radio, or made an antenna work, or climbed on a hill or learnt Morse Code, you need to share your victories and the excitement that they bring you.

    As a society we're not shy about tweeting what we had for breakfast, sharing an interesting picture or discussing an article we saw on reddit. Fundamentally what you do and who you are is worth talking about and sharing.

    So, next time you talk about going camping, or discuss a barbecue you had with friends, or relate to your friends something that happened, don't be shy about your amateur radio affiliation.

    It's not a secret society, it's not weird or embarrassing, it's just part of what makes you who you are.

    I'm Onno VK6FLAB


    What's the point of this hobby? Jul 19, 2020
    Show notes

    Foundations of Amateur Radio

    One of the recurring questions in this hobby, technically outside this hobby, asked by people who've not yet, or have only just been bitten by the bug, is: "What's the point of this hobby?"

    In some ways I too have asked this question, though for me the answer came within a few months of learning that amateur radio exists. In response to others asking this I've also made meagre attempts to answer this question with varying degrees of success and satisfaction.

    The typical responses are things like: there's a thousand hobbies inside amateur radio, it's about the communication, about the camaraderie, about climbing and hiking, about technology, science, physics, electronics. The truth is that this is just a fly-over view of what it means to have this as your hobby.

    It occurs to me, having now been licensed for a little while, I can actually express a little more clearly what this hobby has given me.

    At a basic level, I now know what the front of a TV aerial is and how Wi-Fi is attenuated by walls, how line of sight works and why you can talk to the International Space Station with a hand-held radio. I've learnt about sunrise and sunset and how they affect propagation, the grey line and how the ionosphere is broken into layers that are affected by solar radiation. I've learnt about sunspots and how they change over time, that there are cycles, that there is a thing called the Maunder Minimum and that propagation is a fickle beast. I've learnt about the Ionospheric Prediction Service and about band planning in contests, about dealing with pile-ups and making contacts, about voice-keyers and computer controlled radios, about contesting software and logging, about contest scoring and contest rules.

    I've learnt about gain and about loss, about how 75 Ohm coax differs from 50 Ohm coax, how connectors work, about soldering and crimping, how to use a crimper and what connectors to use with which coax. I've learnt about path-loss and about bouncing signals off the moon, about Sagittarius A*, a bright and very compact astronomical radio source at the centre of the Milky Way and about inclination and ascension, about galactic coordinates and observation windows, about programming in Python and the astropy library.

    I've learnt about how radio signals are used to encode information, the seemingly infinite supply of digital modes and how a radio signal can be described in three dimensions. I've learnt how maths can describe amplitude modulation and how side-bands can be described, about signal to noise ratios and decibels.

    I've experienced the joys of making a rare contact, to places like Amsterdam Island, Prince Edward & Marion Island, Heard Island, Micronesia, Cuba, Kiribati, and many more. I've learnt more about geography, about maidenhead locators, learnt new phrases and started learning new languages.

    I've gone out camping more times than I can count, spent nights under the stars making contacts across the globe. I've set-up my station in parks and on peaks across the country, made life-long friends locally and abroad, tested my patience and my endurance.

    I've learnt about the pioneers and inventors who came before me, about their successes and failures, their enduring legacies and their inventiveness. I've gained insight into Apollo radio communications and distance measuring, global positioning before there was GPS, about satellite dishes and radio during disasters, about emergency communications and temporary set-ups with just enough to get the job done.

    I've written software, made charts, learnt how to use GNUPlot, written articles, recorded podcasts, interviewed amateurs, published books, produced, presented and transmitted amateur news broadcasts, built amateur radio websites, chaired meetings, raised funds, contributed to club committees and helped as I was able.

    I've helped organise a national amateur radio conference, learnt how to teach others and created a weekly radio net for new and returning amateurs. I've acted as a point of contact, offered life advice and acted as a shoulder to cry on when the going got tough for some of my fellow amateurs.

    I've built more, tested more, explored more, learnt more and done more in the past decade than I have in the 40 years before that.

    When I look back over the 472 podcast episodes I've written so-far, that massive list is only just scratching the surface and it only just begins to describe how deeply affected I've been by this hobby. It only barely describes the width and depth of this hobby and I've only been here for a little while.

    I must point out that I did all these things because I could, because I had radio amateur friends who prodded and poked, who helped and asked, who gave and received. My exposure over this decade was only possible because there are others who share my interests and stopped to take a moment to express that.

    Next time you're asked about how amateur radio is relevant, how it relates to the world, how it affects you and your life, what it's given you, or what you can gain from it, consider, even just for a moment, just how much is possible within this massive hobby.

    I'm Onno VK6FLAB


    Previous 1 31 32 33 34 35 61 Next

    Related Podcasts

    Ham Nation

    1

    Ham Nation Games & Hobbies
    The Brülosophy Podcast

    2

    The Brülosophy Podcast Games & Hobbies
    Good Job, Brain!

    3

    Good Job, Brain! Games & Hobbies
    Making It With Jimmy Diresta, Bob Clagett and David Picciuto

    4

    Making It With Jimmy Diresta, Bob Clagett and David Picciuto Arts
    Waypoint Radio

    5

    Waypoint Radio Arts
    BeerSmith Home and Beer Brewing Podcast

    6

    BeerSmith Home and Beer Brewing Podcast Games & Hobbies
    footer-logo

    Contact Us

    Toll Free: 844-670-7747

    Links

    • Home
    • Top Charts
    • Networks
    • Apps
    • Independents Podcasts
    • Podcast Advertising
    • Podcast News
    • Contact Us
    • About Us
    • Analytics & Insights

    Stay Connected

      Privacy, Terms of Use & Our Code of Ethics Protecting Content Creators Copyrights