Stay ConnectedWe Built A Thing is about making things with our hands, sharing videos about the process, being dads and constantly learning.
We are all part-time makers, dads and all have YouTube channels we are trying to grow.
Throughout this podcast, we plan to talk about making things, making videos to share on YouTube, Instagram, Facebook, etc..
Copyright: © All rights reserved
In this one, Mark releases ANOTHER video...kicking off his Man Cave build. Bruce cleans a laser. Drew ships a 7lb push stick. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Scott @ Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed -Brad Hoff-TwoRedDogsWoodworking -Tommy Trease New:
-TwoRedDogsWoodworking-Derek Vanderkleed-Michael Brown-Will Courson
Support our sponsors: Klingspor Woodworking - Use Code GunFlint10 for 10% off any 3" Rolls and conveyor belts when you spend $50 or more. Good Until October 16 MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/mXdTJsoS1Xc Drew's most recent video: https://youtu.be/m7SVAuQhevg Mark's most recent video: https://youtu.be/xf1jjEFRdkU We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark releases a new video about his drum sander. Bruce goes to Maker Faire. Drew gets in the production game. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Scott @ Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed -Brad Hoff New:-Blaz Malezic-Seth Williams-Byrom's Custom Woodworks-Stephen McDowell-Steven Gilmore
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/mXdTJsoS1Xc Drew's most recent video: https://youtu.be/m7SVAuQhevg Mark's most recent video: https://youtu.be/nsd-oYq9FDE We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark unknowingly has some interesting links on his website. Bruce cuts out some lanterns on the CNC. Drew published a video about improving his miter saw. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Scott @ Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed -Brad Hoff
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/mXdTJsoS1Xc Drew's most recent video: https://youtu.be/m7SVAuQhevg Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark new laser tube just MIGHT solve his problems. Bruce has a dust collector in his foyer. Drew gets stung and calls Orkin. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Scott @ Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed -Brad Hoff New: -Bill Noe -Steven Gilmore
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/mXdTJsoS1Xc Drew's most recent video: https://youtu.be/uUXqMxOCtDs Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, We Bought A Thing. Mark retreats to a cabin. Drew wraps up a piggy bank and continues to suck bees into his dust collector. Bruce makes the biggest mess and published a video about making some cherry live edge end tables. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
WE BOUGHT A THING: BRUCE: -camera remote: https://amzn.to/3AAfQsC -bottle cutter: https://amzn.to/3ecKgtq -mini screwdriver set: https://amzn.to/3CL0qoa MARK: -Claymore Mine: https://amzn.to/3Qzmx4R -Heat Resistant Tape: https://amzn.to/3QImtQh DREW:-lights: https://amzn.to/3PKIPPH Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Scott @ Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed -Brad Hoff New: Byte Sized Engineering
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/mXdTJsoS1Xc Drew's most recent video: https://youtu.be/uUXqMxOCtDs Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark lights a basement. Drew can't bee-lieve his luck. Bruce buys lumber half off. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Ortur Laser Master 3: https://tinyurl.com/orturlmp3 Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Scott @ Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Chris Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed -Brad Hoff New: Brad Hoff
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/6QageuNFkmY Drew's most recent video: https://youtu.be/uUXqMxOCtDs Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark just wants to cut some leather with a laser. Is that too much to ask? Bruce published the queen bed frame video, so be sure to check that out. Drew published the dartboard video. WHAT IF! Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)
Ortur Laser Master 3: https://tinyurl.com/orturlmp3 Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Christopher Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed New: Jamie Roan
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/6QageuNFkmY Drew's most recent video: https://youtu.be/uUXqMxOCtDs Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark gets somewhere with his laser troubleshooting and attends a really nice company retreat. Drew is pushing hard to finish up his dartboard video this week. And he makes a replicator box for a friend. Bruce is back from Mississippi and the vanity makeover went really well at his parents' house. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Christopher Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed New:McMath WoodworksRyan Yeats
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/0XOw2B9oLsg Drew's most recent video: https://youtu.be/GbUOsfaMGRM Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark is told 500 times to check his mirror alignment on his laser and check the distance the nozzle is from the piece. Drew keeps playing darts...but desperately needs to not put marks on the walnut dartboard, since he doesn't have finished photos of it yet. Bruce travels to Mississippi to visit his folks and work on a vanity makeover project at their house. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Christopher Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed New:McMath WoodworksRyan Yeats
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/0XOw2B9oLsg Drew's most recent video: https://youtu.be/GbUOsfaMGRM Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
In this one, Mark completely rips out the upstairs bathroom all the way to the studs. Drew uses a TRIANGLE to make a pretty neat design on the dartbard cabinet. Bruce wraps up the queen bed frame build. Plus, a ton more! This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/ (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!) Become a patron of the show! http://patreon.com/webuiltathing OUR TOP PATREON SUPPORTERS: -YouCanMakeThisToo YT: http://bit.ly/38sqq7v -Jennie and Davis YT: http://bit.ly/3evuXdg-Tom's Woodwork-Tim Morrill-Brent Jarvis IG: https://bit.ly/2OJL7EV -Dad It Yourself DIY YT: http://bit.ly/3vcuqmv-Broken Lead Woodworks IG: https://bit.ly/38vQij8 -Christopher Simonton-Maddux Woodworks YT: http://bit.ly/3chHe2p-Ray Jolliff -Ryder Clark-Wilker's Woodcraft -Deo Gloria Woodworks: https://www.instagram.com/deogloriawoodworks/ -Kris -Wayne's Woodshed New:McMath WoodworksRyan Yeats
Support our sponsors: MagSwitch: https://mag-tools.com -use code "WBAT" for 10% off SurfPrep: https://www.surfprepsanding.com/?aff=48 -use code "FISHER10" for 10% off RZmask: use code "FISHER10" for 10% off Bits & Bits: use code "FISHER10" for 10% off Starbond: use code "BRUCEAULRICH" Rotoboss: "GUNFLINT" We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support) https://amzn.to/2GP04jf https://amzn.to/2TUrCr2 ETSY SHOPS: Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486 Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766 Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect Bruce's most recent video: https://youtu.be/0XOw2B9oLsg Drew's most recent video: https://youtu.be/GbUOsfaMGRM Mark's most recent video: https://youtu.be/hza4Y3Kd2B8 We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between. CONNECT WITH US: WE BUILT A THING: www.instagram.com/webuiltathingWE BUILT A THING EMAIL: webuiltathing@gmail.com FISHER'S SHOP: www.instagram.com/fishersshop/ BRUDADDY: www.instagram.com/brudaddy/ GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns
Music by: Jay Fisher (Thanks, Jay!)
Our TOPPODCAST Picks 
