Vital MX

Latest Episodes:

Tech Edition: Motocross Nutrition with Blake Savage Nov 07, 2020

Show notes

Of course we are biased, but it is hard to argue against the fact that motocross at its highest level is the most physically demanding sport on the planet. To perform at their peak, racers have to have endurance, strength, agility, and raw power, which they can't achieve eating doughnuts and cheeseburgers. Well, maybe Jett can. To get a little insight into how pro racers are fueling their bodies, we grabbed Blake Savage, former pro motocross racer and current motocross trainer. He's worked with Ken Roczen, Cole Seely, Christian Craig, Chase Sexton among others. Listen in to see if you can take some of the tips and nutrition guides Savage shares and apply them to your weekend warrior program.

AC92's Crew Chief, Oscar Wirdeman | Vital MX Inside Line Podcast Jul 28, 2020

Show notes

Send us Fan Mail

Oscar has worked with a ton of championship-caliber riders both here and abroad. That list includes guys like James Stewart, Chad Reed and Ken Roczen, and he's currently the crew chief for Adam Cianciarulo over at Monster Energy Kawasaki.

Tech Edition: We are going off the CHAIN! Jun 26, 2020

Show notes

Send us Fan Mail

Be honest, is your chain squeaking? Is it loud and rattling like pennies in a tin can? Is it flapping and flopping into your swingarm like its desperately trying to get your attention? Hopefully not, because not only is this unsafe, it is not the optimal operating conditions for your dirt bike.
We grab Clayton Solise of D.I.D Chains (not "Did" but Dee Eye Dee) to give us a detailed look at the drive train of your bike. Believe it or not, pro teams do test different chains often to find the best characteristics for what they are trying to achieve. Obviously, most of the time it is more power and a faster dirt bike, which leads them to non-sealed chains. But, surprisingly, there are some factory supercross and motocross teams that run sealed, also known as O-ring or X-ring, chains.
Plus, we talk about cleaning and lubing. No! Back away from the pressure washer, slowly and calmly. There are better, safer, and more durability-enhancing ways of cleaning and lubricating your chain. Cheers!

Racing On Hold, From a Team Owner’s Perspective, With Forrest Butler | The Inside Line May 07, 2020

Show notes

Send us Fan Mail

While we’re waiting for the racing season to resume, we caught up with Forrest Butler, the owner of the Rocky Mountain ATV-MC/KTM/WPS team. He had a lot to say about being on hold...and the possible way back to action.

Tech Edition: What The Clutch Is Going On? | The Inside Line Apr 03, 2020

Show notes

Send us Fan Mail

We pull in the left lever and don't give it another thought. But what exactly is a clutch? How does it work? What are all the parts? What are the pros and cons of switching out the OEM parts for other options? What oil is best? Hydraulic or cable? Should you mess with your actuator arm? So many questions and just one podcast to answer them.
In this Tech Edition of the Inside Line Podcast, we talk with Austin Paden from Rekluse all about clutches. Other than knowing about his brand's products, Austin also has deep knowledge about every single aspect of dirt bike clutch performance from stock to exotic. Sure, you could just stick with stock clutch packs and forget about it, but if you have any engine mods on your bike whatsoever, all that power has to go through the clutch and you might want to figure out the best way to get all the ponies you already paid for.

Dave Prater, Senior Director of Operations for Supercross | The Inside Line Mar 30, 2020

Show notes

Send us Fan Mail

We got a chance to chat with Dave, who has been up to his elbows in the Supercross series for the last two decades about what we can hope for in the remaining seven rounds of the 2020 season. He's seen just about every possible scenario, but the Coronavirus obviously threw everyone a curve.
While this is shorter than usual, there’s some interesting info in here, both about how abruptly the season ended, and what we can look forward to in the future.

6D's Bob Weber | The Inside Line Mar 16, 2020

Show notes

Send us Fan Mail

When it comes to rider safety, one of the things that we’ve enjoyed are the recent advances in helmet design, technology, and construction. 6D’s intro to the market was well-timed, with the introduction of their Omni-Directional Suspension (ODS). We checked in with Bob Weber at 6D to talk about what it took to get the company off the ground, what they’ve discovered during their time in business, and what’s in store for the future.

Tech Edition: Race Fuel Explained | The Inside Line Feb 04, 2020

Show notes

Send us Fan Mail

“Pour-in performance” is pretty much the tagline for race gas. But what is it really? How is it different than pump gas? What do octane numbers actually mean? Do you want oxygen or lead in there? Will it help a stock bike? These questions, and many more, are answered with our talk with Bruce Hendel of VP Racing Fuels, who explains all the different applications and pros and cons of running race gas. Sorry that this podcast can’t bring you smell, too. Enjoy!

Tech Edition: All About Knee Braces | The Inside Line Jan 18, 2020

Show notes

Send us Fan Mail

Just after helmets and boots, knee braces are the most complicated and expensive pieces of motowear in our garage. But unlike helmets that have universal standards and have been around for over 100 years, knee braces started in the last 30 by a Jim Castillo who is still around to this day. We talk with Brett Guerin of CTi, the current version of one of the companies Castillo created. We cover knee brace philosophy, history, technology, and where we think braces could be going in the future.

Tech Edition: Cylinder Head Modification | The Inside Line, Presented By Thor Dec 18, 2019

Show notes

Send us Fan Mail

When talking about engine mods for motocross bikes, the phrase "ported and polished" gets thrown around a lot. But do we all know what that really means? Turns out, according to Andrew Flores, Engine Research and Development at Race Tech, polishing is the last thing you want to do to intake and exhaust ports. We get into all the different ways a cylinder head can be manipulated and what each modification does so that you can have a better idea of what head mods are available and if any are right for you're motocross machine.

Our TOPPODCAST Picks

Follow Us

Stay Connected

Related Podcasts

Links

Stay Connected

Our TOPPODCAST Picks

Follow Us

Stay Connected

Vital MX

Related Podcasts

1

2

3

4

5

6