Software Gone Wild by ipSpace.net

Latest Episodes:

Fibbing: OSPF-Based Traffic Engineering with Laurent Vanbever Nov 27, 2015

Show notes

You might be familiar with the idea of using BGP as an SDN tool that pushes forwarding entries into routing and forwarding tables of individual devices, allowing you to build hop-by-hop path across the network (more details in Packet Pushers podcast with Petr Lapukhov).

Researchers from University of Louvain, ETH Zürich and Princeton figured out how to use OSPF to get the same job done and called their approach Fibbing. For more details, listen to Episode 45 of Software Gone Wild podcast with Laurent Vanbever (one of the authors), visit the project web site, or download the source code.

Test-Driven Network Development with Michael Kashin on Software Gone Wild Nov 13, 2015

Show notes

Imagine you’d design your network by documenting the desired traffic flow across the network under all failure conditions, and only then do a low-level design, create configurations, and deploy the network… while being able to use the desired traffic flows as a testing tool to verify that the network still behaves as expected, both in a test lab as well as in the live network.

Optimizing Traffic Engineering with NorthStar Controller on Software Gone Wild Oct 30, 2015

Show notes

Content providers were using centralized traffic flow optimization together with MPLS TE for at least 15 years (some of them immediately after Cisco launched the early MPLS-TE implementation in their 12.0(5)T release), but it was always hard to push the results into the network devices.

PCEP and BGP-LS all changed that – they give you a standard mechanism to extract network topology and install end-to-end paths across the network, as Julian Lucek of Juniper Networks explained in Episode 43 of Software Gone Wild.

SDN Internet Router Is in Production on Software Gone Wild Oct 16, 2015

Show notes

You might remember the great idea David Barroso had last autumn – turn an Arista switch into an Internet edge router (SDN Internet Router – SIR). In the meantime, he implemented that solution in production environment serving high-speed links at multiple Internet exchange points. It was obviously time for another podcast on the same topic.

Software-Defined IXP with Laurent Vanbever on Software Gone Wild Oct 05, 2015

Show notes

A while ago I started discussing the intricate technical details of fibbing (an ingenious way of implementing traffic engineering with traditional OSPF) with Laurent Vanbever and other members of his group, and we decided to record a podcast on this topic.

Things never go as planned in a live chat, and we finished talking about another one of his projects – software defined Internet exchange point (SDX), the topic of Episode 41 of Software Gone Wild.

DLSP – QoS-Aware Routing Protocol on Software Gone Wild Sep 18, 2015

Show notes

When I asked “Are there any truly QoS-aware routing protocols out there?” in one of my SD-WAN posts, Marcelo Spohn from ADARA Networks quickly pointed out that they have one – Dynamic Link-State Routing Protocol.

He also claimed that DLSP has no scalability concerns – more than enough reasons to schedule an online chat, resulting in Episode 40 of Software Gone Wild. We didn’t go too deep this time, but you should get a nice overview of what DLSP is and how it works.

Use nProbe and ELK Stack to Build a Netflow Solution on Software Gone Wild Sep 04, 2015

Show notes

How do you capture all the flows entering or exiting a data center if your core Nexus 7000 switch cannot do it in hardware? You take an x86 server, load nProbe on it, and connect the nProbe to an analysis system built with ELK stack… at least that’s what Clay Curtis did (and documented in a blog post).

Obviously I wanted to know more about his solution and invited him to the Software Gone Wild podcast. In Episode 39 we discussed:

Layer-3-Only Data Center Networks with Cumulus Linux on Software Gone Wild Aug 21, 2015

Show notes

With the advent of layer-3 leaf-and-spine data center fabrics, it became (almost) possible to build pure layer-3-only data center networks… if only the networking vendors would do the very last step and make every server-to-ToR interface a layer-3 interface. Cumulus decided to do just that.

Software-Defined Hardware Forwarding Pipeline on HP Switches Jun 26, 2015

Show notes

Writing OpenFlow controllers that interact with physical hardware is harder than most people think. Apart from developing a distributed system (which is hard in itself), you have to deal with limitations of hardware forwarding pipelines, differences in forwarding hardware, imprecise abstractions (most vendors still support single OpenFlow table per switch), and resulting bloated flow tables.

Open-Source Network Engineer Toolbox Jun 19, 2015

Show notes

Elisa Jasinska, Bob McCouch and I were scheduled to record a NetOps podcast with a major vendor, but unfortunately their technical director cancelled at the last minute. Like good network engineers, we immediately found plan B and focused on Elisa’s specialty: open-source tools.

Our TOPPODCAST Picks

Follow Us

Stay Connected

Software Gone Wild by ipSpace.net

Related Podcasts

Links

Stay Connected