Show notes
This episode of Ron Ananian: The Car Doctor radio show is a classic mix of Ron’s hands-on mechanical experience, practical advice, and personable banter with callers and listeners. Here's a summary and description of the episode:
🎙️ Episode Summary: 🔧 Segment 1 – Starter Replacement on a 2007 Honda Accord:
Ron opens the show talking about a video he just filmed demonstrating how to replace a starter on a 2007 Honda Accord (4-cylinder). He points out that while GM was criticized for putting starters under the intake manifold, Honda did the same thing, and nobody complained. He discusses the abundance of bad advice on YouTube, like rushing the job and pulling on old, brittle parts. His philosophy is clear: take your time, be careful, or risk breaking more than you fix.
“I’d rather be cautious and not break something than rush to get something done.”
👥 Segment 2 – Call from Childhood Friend "Chuck" in Texas:
A special moment follows when Ron takes a call from Chuck, an old neighborhood kid who used to watch him work on cars as a teenager. Chuck brings up an issue with front-end clunking on his truck (likely an F-150), traced to a sway bar bushing problem. Chuck replaced them with MOOG bushings, but he's still experiencing noise and play in the sway bar. He also noticed a retaining ring on only one side of the sway bar and is confused about its purpose.
Ron suspects:
-
Wrong-size bushings
-
Possibly not actual MOOG parts (they’re usually blue, not red)
-
Or worn components like the sway bar links.
They dive into troubleshooting methods, tools (impact wrench, cutting tools), and the possibility of cutting the stubborn bolts off if they can’t be removed. Ron emphasizes getting the correct part specs and even measuring the sway bar diameter.
🔧 Segment 3 – Caller "Terry" with a Misfiring Subaru:
Terry from Wisconsin calls to thank Ron for helping solve a misfire issue on his Subaru. Although the car wasn't throwing codes, Ron previously suggested a diagnostic routine & made the case for replacing the spark plugs and transmission fluid. It worked! The car is now running fine.
Ron uses this as a teachable moment to explain Mode 6 diagnostics – a deeper level of OBD-II data that helps identify misfires and marginal component failures before a check engine light comes on. He urges all mechanics to understand and use Mode 6.
Ron also suggests a BG carbon cleaning service for preventative maintenance and better performance.
🚗 Segment 4 – Caller from Pennsylvania with a Vibrating 2004 Toyota Matrix:
A listener calls about a severe vibration issue that started after installing snow tires. Even after swapping to brand-new, high-end tires, the vibration remains. Ron suspects it might not be tire-related and asks about any recent work (none was done). He begins diagnosing potential drivetrain or suspension issues, suggesting the vibration is likely not tire-related, but part of something deeper (possibly axles, mounts, or wheel bearings).
🧰 Key Takeaways:
-
Be skeptical of overly simplified or rushed DIY advice online.
-
Don’t yank on 15-year-old car parts—they break.
-
Always verify part compatibility, especially with aftermarket parts like bushings.
-
Mode 6 data is underused but powerful for pre-emptive diagnostics.
-
When bolts won’t budge, sometimes it’s quicker and safer to cut them.
-
Mechanical integrity > speed — do it once, do it right.
🎧 Vibe & Tone:
-
Friendly, practical, and no-nonsense.
-
Ron is relatable, down-to-earth, and passionate about proper car care.
-
He combines real-world shop experience with genuine care for his audience.
Visit us at https://www.cardoctorshow.com
- Follow Us On Instagram - @ronananian
- Visit our You Tube Channel for auto repair tips and videos
- Call Into The Car Doctor Hotline 24/7 (855)560-9900
- Live Call In Show Saturdays 2-4PM Eastern Time
See omnystudio.com/listener for privacy information.
Our TOPPODCAST Picks 
Stay Connected
