Stay ConnectedThe voice of mountain biking. Mountain bike talk from mountain bikers, for mountain bikers.
A place for mountain bike talk. Shows cover topics from racing, current events, products, to women’s topics and anything in the world of non-road cycling. From the average joe to the top pro and from short track to multiday adventures, Mountain Bike Radio brings the world of mountain biking to you.
Check out www.mountainbikeradio.com for full show archives, guest information, links, and more!
April 5, 2017
ABOUT THIS EPISODEWhat do you do when your rear wheel is about to impact a decent size rock, log, or ledge?
If you're a beginner or intermediate-level rider, you probably rely on some combination of momentum, traction, rear suspension, hope and prayer.
If you've taken an MTB 101 course, your instructor probably taught you how to 'load and explode' followed by a lifting of the rear wheel with a scooping/clawing of the pedal with the rear foot. And you probably never do that type of 'lifting' for good reason.
In this episode, Griff explains why rear wheel unweighting is much more useful than rear wheel lifting. Plus, it's much easier to learn.
We want to hear from you! If you have any questions, comments, or ideas for the next episode, contact us at ben@mountainbikeradio.com.
-------------
RELATED SHOW VIDEOSI recorded this video of me going over this rock at Lebanon Hills Mountain Biking Trails on a hardtail fat bike about a year ago. As you can see in the stop motion segment, I'm not using a bunny hop.
I'm using a manual to lift my front wheel so it kisses the top of the rock. I then load/compress my weight (not enough, it appears) and then 'explode' straight up, unweighting my rear wheel early enough so that it is rising up off the ground as it impacts the rock.
I'm not scooping or clawing or lifting my rear wheel with my trailing right foot at all.
"Using a manual and rear wheel unweighting to get over a big rock"
I made this short video a couple years ago, demonstrating rear wheel unweighting over some small firewood, followed by rear wheel unweighting up a curb, no front wheel braking.
In the last segment, it might look like I'm using a scooping/clawing/lifting technique with my rear foot, toes pointed down. But I'm not. I'm just leaping, with hand pressure on my bars opposed with foot pressure on my pedals.
"Rear wheel unweighting vs rear wheel lift"
-------------
RELATED SHOW LINKSShop via our Amazon Affiliate Link
Go to the Mountain Bike Radio Store
Rear wheel unweighting vs rear wheel lift discussion in MTBSN FB Group
Griff's affiliate link to Ryan Leech
Join the Mountain Bike Skills Network Facebook group
Follow Mountain Bike Skills Network on Twitter
Follow Mountain Bike Skills Network on Instagram
March 29, 2017
ABOUT THIS EPISODE
Matt and Andrea check in after Day 3. They're joined by Ergon's Jeff Kerkove to discuss the last day of the Moab Rocks Stage Race. Plus, Andrea has a super awesome gummy bear story (you can judge...hopefully they weren't sugar free Haribos.)
-----------
LINKS
March 27, 2017
ABOUT THE EPISODE
On this episode of Trail Cast, Drew gives a quick update on recent happenings, and then talks to urban mountain biking authority, Joshua Rebennack. Joshua has been involved with the popular and growing Cuyuna Lakes Mountain Bike Trail System and has experience with how trail associations can develop, create, and maintain trails near cities, towns, and other urban areas.
If you or someone you know is in charge of trail projects or organizing work days for your group, Drew wants you to email him. Share your projects and when your work days are, and he'll share that information in future episodes.
If you have any questions, comments, or ideas for the next episode, contact us at info@mountainbikeradio.com.
----------
RELATED SHOW LINKS
Shop via our Amazon Affiliate Link
Shop the Mountain Bike Radio Store
Email Joshua at joshua.rebennack@gmail.com
Cuyuna Lakes Mountain Bike Trails
International Mountain Bike Association
Read More about the host, Drew
Email Drew
March 27, 2017
ABOUT THIS EPISODE
Day 2 was definitely harder. Bumpy, lumpy, and a good challenge. Matt is getting worn out and Andrea is moving up a little.
-----------
LINKS
March 27, 2017
ABOUT THE EPISODE
As usual, the guys open with some quick shop news, including a job opening, then chat about what's new. They chat about some helmet options and Nathan discusses his recent trip to the North American Handmade Bicycle Show (NAHBS.) Tani gives a shout out to some out-of-town listeners who stopped into the shop. A big thanks to them and to all of you for listening in. Plus, Nathan really likes Top Gun.
The guys answer listener questions, including the following:
– Randy has been riding with F-U finger braking
– Ricky has a bad knee and wants a new bike
– Randy wants to ride more than ever because of the show and is wondering if the pendulum is swinging back to 29ers
The Path guys welcome all of your questions and encourage you to send them an email with the subject "Podcast Question" to podcast@thepathbikeshop.com.
--------------
RELATED SHOW LINKS
Shop via our Amazon Affiliate Link
Shop the Mountain Bike Radio Store
Get on The Path Newsletter Email List
The Path Bike Shop Facebook Page
The Path Bike Shop on Instagram
The Path Bike Shop on Pinterest
Like what you are getting from Mountain Bike Radio? Support it and get something in exchange.
March 26, 2017
ABOUT THIS EPISODE
Andrea and Matt check in with a listener after a fast and challenging day at the TransRockies Moab Rocks Stage Race. Both the men's and women's fields are filled with top racers making the competition tough. It's a great early season race to test their fitness and skills while they enjoy a little warm desert spring temperatures.
-----------
LINKS
March 26, 2017
This episode is brought to you by:TravelKS.com JensonUSA Grinder Nationals Pig Trail Gravel Grinder
ABOUT THE EPISODE
Troy Farrar is one of the people behind the new Grinder Nationals, set to go off on Saturday, June 24, 2017 in Lawrence, Kansas. Troy joins the podcast to discuss the new race, the intentions behind it, and the goal of this year and the event going forward. Troy also shares his long history in the world of directing endurance sports events and how that has brought him to this point.
Troy is also an important member of the United States Endurance Cycling Federation and he gives listeners information about what they do and who they are. If you're looking to add a little more competition to your summer while on gravel, be sure to have a listen.
If you have any questions, comments, or have an idea for an episode, please feel free to contact us anytime.
-------------
ABOUT THE GRINDER NATIONALS
It's time for some Gravel Grinding and Lawrence, Kansas is the place! There is a category for everyone from high school to those who are a little longer in the tooth and all who register for the USECF Gravel Grinder National Championship will race for a coveted USECF National Champion Jersey!
See what you are made of as you race across a challenging & scenic course as part of the 2017 USECF National Championship Weekend. The USECF Gravel Grinder National Championship will be part of the weekend festivities which include an epic course, great food and a fun & festive award ceremony. The awesome course and time in the saddle with the gravel tribe will make this an epic event to remember.
CLICK TO LEARN MORE ABOUT GRINDER NATIONALS
CLICK TO REGISTER FOR GRINDER NATIONALS
----------------
ABOUT THE USECF
The USECF is a group of grassroots racers that have been producing and racing in off road endurance cycling events for over 25 years. The USECF will aid race directors by providing inexpensive event insurance with no participant membership or license fees, a database of race director resources and free consulting to assist race directors in producing successful events.
The USECF wants to celebrate off road endurance cyclist's hard work, dedication and love of endurance cycling by producing endurance cycling national championships. These championships will provide the opportunity for endurance cyclist to compete against other racers from around the country and will recognize & reward the top competitor's efforts with national champion jerseys.
The mission of the USECF is to support the positive growth of endurance cycling events at the grassroots level.
------------------
RELATED SHOW NOTES
Grinder Nationals Event Page on Riding Gravel
United States Endurance Cycling Federation
Discuss the Grinder Nationals on the thread on the Riding Gravel Forum
March 25, 2017
ABOUT THE EPISODE
A great person out there in listener land sent in a suggestion to talk with people about removing stripped bolts. He said he is a pro at removing stripped stuff as he has an extensive background in cars and the usual cussing that goes along with them. Tune in to hear some tips for removal plus some guidance on the "final step" if you have deemed the entire project to be a complete loss.
We want to hear from you! If you have any questions, comments, or ideas for the next episode, contact Matt at matt@mountainbikeradio.com. If you have a question that is centered around a particular thing you heard on MBR please send the show name and time in the show the confusion arose. If it is from a specific article, send Matt a link. Something going on with your own bike or something in real life? Shoot over a photo with your question.
-----------
ORDER OF METHODS TO ATTEMPT REMOVAL
-Torx trick -EZ-Out -Drill it out -For external bolt heads – vice grips.
If you have deemed the entire project a complete loss, "Uncle Rob it"
----------------
RELATED SHOW LINKS
Shop via our Amazon Affiliate Link
Go to the Mountain Bike Radio Store
The Trailhead Episode #06 – Packing for a Trip
The Trailhead Episode #05 – Brake Intervals
The Trailhead Episode #04 – Suspension Pivots
The Trailhead Episode #03 – Suspension Care
The Trailhead Episode #02 – Rotational Bearings
The Trailhead Episode #01 – Cold Weather
Become a Mountain Bike Radio member
March 24, 2017
ABOUT THE EPISODE
Andrea quickly checks in with a quick episode talking about her new Rogue Panda Alamo Top Tube Bag. She's getting back to the podcast and has a good 2017 lined up on the bike.
Who is Andrea? Click HERE to learn more.
If you have any ideas for future guests or episodes, please contact us at info@mountainbikeradio.com.
-------------
RELATED SHOW LINKS
SHOP THE MOUNTAIN BIKE RADIO STORE
SUPPORT MBR BY SHOPPING THROUGH AMAZON
Rogue Panda Alamo Top Tube Bag
Andrea's Blog – Andrea Rides a Bike
Andrea on Instagram (@andrearidesabike)
March 22, 2017
BUY A NEW JRA SHIRT TODAY. CHOOSE FROM 10 NEW COLORS!
ABOUT THE EPISODE
The crew finally catches up on the onslaught of listener questions, Kenny has more Di2 Gremlins in the shop, and some new things you definitely hate are in the house. The show is a little long, so cozy on up and have a listen to see how things are going in the land of JRA.
SHOW DONATIONS– Zachary Thorne of Connecticut gave $10 – Dan Casella from Connecticut gave $10
A huge thanks to this week's show supporters! If you like JRA and want it to continue, consider supporting the show, CLICK HERE.
We want to hear from you! If you have any questions, comments, or ideas for the next episode, contact us at jra@mountainbikeradio.com. If you have a question, please include the following details: what do you weigh, do you jump stuff, what is your budget, what is your goal? This will help us, help you, keep Just Riding Along.
--------------
LISTENER QUESTIONS
Questions answered by the crew in this episode:
– Tom from Michigan sends us a link to some real nugget trouble. – Griff from Washington sends in a link to Kenny's new full face helmet. – Isaac Mondragon has questions about his Fox shock CTD lever wiggles. – Racer Randy has a question about angleset headesets. – Matt from British Colombia wants to take some of hydrualics out of his Reverb. – Michael from New Jersey wants to upgrade from his Cannondale F29. – Sloan from Whistler wants to get a new Pivot - Firebird or Mach 6. – Gravy from Arizona has crank questions for his Stumpy.
If you have any comments or questions for the Just Riding Along show, email to jra@mountainbikeradio.com
--------------
RELATED SHOW LINKS
Shop via our Amazon Affiliate Link
Go to the Mountain Bike Radio Store
RaceFace BB92 - 30mm Spindle Installation Instructions
Become a Mountain Bike Radio member
Brickhouse Racing Facebook Page
Our TOPPODCAST Picks 
