CNC Router Tips Podcast

*/ ?>

Latest Episodes:

CNCRT 72 S2: Summer In The Shop Sep 09, 2023

Summer In The Shop CNC Router Tips Podcast Episode 72 Season 2: CNCRT72S2
Making things more confortable in the shop.
Summer in the shop has been busy and hot. Finding ways to make things more comfortable in the shop was my priority this summer. So I started tackling some projects I had been putting off.
When some florescent bulbs stopped working it was time to change them. But while I was at it I decided to install new LED bulbs to replace the florescent bulbs.LED bulbs have come way down in price and installing them can really drop your electrical bill and also really brighten up the shop.
Bill Griggs discusses his recent trip to Eastec conference (see episode 71). He also talked about the weekly Live CNC Router Mixers on Zoom every Wednesday at 7PM ET. Members get together to talk about CNC Routers and their project. Guest have included Phil DeCarlo The exotic Woodworker, Bull Shananigan from The Make Group, Mark Lindsay (Episode 63) from Mark Lindsay CNC, and Ned Gligic.
Talley Boatwright recently posted some pictures of his new vacuum table, which got Bill thinking about adding a vacuum table to his CNC Router. Bill picked up a vacuum pump motor from Oneida Air and began making plans to install it using some gaskets and advice from Alex Palm of Allstar CNC.
Vectric Ltd. is hosting an online users group meeting on October 5th.
Lastly, we remind people that it is time to get started on your seasonal CNC projects for the Holidays.
Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Monday September 19, 2023 at 7:00PM Eastern https://cncroutertips.com/roadmap
Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/72s2
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
Eastec https://www.easteconline.com/
The Make https://www.facebook.com/groups/480119312742098
AllStar CNC https://www.allstarcnc.com/
Oneida Air Systems https://www.oneida-air.com/
CNC Side Hustle Roadmap https://cncroutertips.com/roadmap
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill Griggs contact info:
Vectric Users Group Online Users Group Meeting
Mark Lindsay CNC https://www.youtube.com/@MarkLindsayCNC/featured
CNC Router Mixer Weekly meeting 7PM ET
X: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/72s2

CNCRT 71 S2 Eastec 2023 May 30, 2023

Eastec 2023: CNC Router Tips Podcast Episode 71 Season 2: CNCRT71S2
Exploring Eastec 2023 Manufacturing Technology Trade Show.
The Eastec Manufacturing Technology Trade show is one of my favorite events. Being able to see the latest machine tools, fixture and accessories in person is a rarity in the NorthEast. The Eastec show gives us the chance to see equipment from many of the major vendors. In this episode Bill Griggs discusses his recent trip to Eastec and the dream machines he saw including AvidCNC, Chiron Group, Takamaz, Kitamura and more.
Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Monday June 19, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap
Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/71s2
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.Eastec https://www.easteconline.com/
Kitamura Machinery https://kitamura-machinery.com
Takamaz https://www.takamaz.co.jp
5th Axis https://5thaxis.com/
Chiron Group https://chiron-group.com/
CNC Side Hustle Roadmap https://cncroutertips.com/roadmap
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/71s2

CNCRT 70 S2 The Perfect Storm Apr 29, 2023

CNC Router Tips Podcast Season 2 Episode 70: The Perfect Storm.
The Perfect Storm: CNC Router Tips Podcast Episode 70 Season 2: CNCRT70S2
Don't Get Caught Without a Backup: Tips for Choosing a PC for Mach3, Mach4, and Pathpilot.
In this episode of the CNC Router Tips Podcast! We're gonna talk about how to choose the right PC for running Mach3, Mach4, and Pathpilot. Whether you're an experienced CNC operator or just starting out, selecting the right computer is essential to keep your machine running smoothly and efficiently.With so many options available, it's easy to get lost in the specs and features. But here's a word of caution: don't forget to have a replacement PC ready to go! Long outages can be frustrating and costly, especially if you're running a business. So, make sure you have a backup computer ready in case something goes wrong.
In this episode, we'll walk you through the essential requirements for running Mach3, Mach4, and Pathpilot on your PC.
Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap
Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/69s2
Key takeaways:

Workholding is essential for CNC router Table success.
Holding multiple parts is more efficient than machining one parts at a time.
Fixture plates can make work setup easier and more repeatable.
Vacuum Tables are widely used to hold large parts.
Give Painters tape and CA Glue a try.
Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

When to choose a Parallel Port:
When to use USB
When To use Ethernet:
Using Pathpilot CNC software.
Mach4 CNC software
External Motion control device:

CNC Side Hustle Roadmap https://cncroutertips.com/roadmap
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/70S2

CNCRT episode 69 S2 Hold It Right There Mar 26, 2023

CNC Router Tips Podcast Season 2 Episode 69: Hold it Right There.
Hold It Right There: CNC Router Tips Podcast Episode 69 Season 2: CNCRT69S2
How will you hold it, right there? In episode 69 of the CNC Router Tips podcast, host Bill Griggs examines Work holding solutions for CNC Router Tables. How you hold your work piece securely to the work table is crucial to your success. Hold It there fast and secure for repeatability.
There are many types of workholding solutions used with CNC Router tables. These solutions include the following:

Vises: Vises are a versatile workholding option that can clamp workpieces of varying sizes and shapes. They come in various configurations, including standard vises, multi-axis vises, and self-centering vises.
Clamps: Clamps are a simple and effective workholding solution that can be used to secure workpieces to the CNC router table. They come in different sizes and shapes, such as C-clamps, toggle clamps, and screw clamps.
Vacuum Tables: Vacuum tables use suction to hold workpieces in place, providing a secure grip without the need for clamps or vises. They are ideal for holding thin or irregularly shaped workpieces and can be customized to fit specific job requirements.
T-Slot Tables: T-slot tables have a series of slots that allow for the use of T-nuts, which can be used to secure workpieces in place. They are versatile and can accommodate a wide range of workpiece sizes and shapes.
Fixture Plates: Fixture plates are used to hold multiple workpieces at once, increasing efficiency and productivity. They are typically made of aluminum or steel and can be customized with various hole patterns and clamping options.
Collet Chucks: Collet chucks are used to hold round or cylindrical workpieces securely in place. They come in various sizes and can be used with different types of collets, including spring collets and dead-length collets.
Pallet Systems: Pallet systems allow for quick and easy workpiece changes, reducing downtime and increasing efficiency. They consist of a series of pallets that can be loaded with workpieces off the machine, allowing for continuous machining operations.
Painters Tape and CA Glue provide a surprisingly strong bond that will hold a workpiece to the spoil board.

Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap
Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/69s2
Key takeaways:

Workholding is essential for CNC router Table success.
Holding multiple parts is more efficient than machining one parts at a time.
Fixture plates can make work setup easier and more repeatable.
Vacuum Tables are widely used to hold large parts.
Give Painters tape and CA Glue a try.
Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
CNC Side Hustle Roadmap https://cncroutertips.com/roadmap
Saunders Machine Works https://saundersmachineworks.com/
Mitee-Bite https://www.miteebite.com/
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/69S2

CNCRT68s2 Let Your Ideas Fly Mar 10, 2023

CNC Router Tips Podcast Season 2 Episode 68: Let Your Ideas Fly.
LET YOUR IDEAS FLY CNC Router Tips Podcast Episode 68 Season 2: CNCRT68S2
In episode 68 of the CNC Router Tips podcast, host Bill Griggs wants you to let your ideas fly. He discusses the versatility of CNC router tables and how they can be used to make a wide variety of products, including gym equipment, backboards for ambulances, and more. The show answers listener questions related to CNC router tables, software, hardware, web hosting, and business. Bill talks about his experience with CNC routers, beginning with making radio control aircraft with laser cut parts before discovering the advantages of using a CNC router to cut thicker pieces of wood. He reflects on how his business has evolved over the years and the importance of adaptability in entrepreneurship. Bill shares a recent experience flying radio control airplanes with a group of fellow hobbyists and how their conversation about needed accessories inspired him to consider using his CNC router to make products for the hobbyist market.
CNC routers are making a splash in the world of RC planes and jets. Bill mentions how CNC Router Tables can be used to create customized carrying cases for the fragile R/C helicopters that enthusiasts use. This leads to a discussion about the benefits of solving one problem and how it can lead to the creation of a whole line of products. One of Bill's favorite YouTuber named Remy RC, uses 3D printed molds and CNC routers to create scale model jets with fantastic results. His results are so good that noted actor, film producer and director, Tyler Perry asked Remy to build a plane for one of his movies and do some conversion work on his models using CNC routers.Key takeaways:

CNC routers can be used to create customized carrying cases for fragile RC planes and helicopters.
Solving one problem can lead to the creation of a whole line of products and a brand.
Remy RC uses 3D printed molds and CNC routers to create scale model jets with fantastic results.
Tyler Perry asked Remy to build a plane for one of his movies and do some conversion work on his models using CNC routers.
Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/68s2
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
Flying RC planes with Tyler Perry https://www.youtube.com/watch?v=hmyi5khnzd0
At Tyler Perry's RC hangar in Atlanta https://www.youtube.com/watch?v=bh4SFI2Qk1E
Building a Giant RC HONDA JET AH-420 full composite, Part 1
https://www.youtube.com/watch?v=XVjYCGLfAdoTyler Perry https://tylerperry.com/
CNC Side Hustle Roadmap https://cncroutertips.com/roadmap
Stepcraft https://www.stepcraft.us/
Newton Makes: https://www.youtube.com/@NewtonMakes
The Makers Guide http://themakersguide.com
ChatGPT https://chat.openai.com/chat
Open AI: https://openai.com/
Shopbot: https://www.shopbottools.com/
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/s268

CNCRT67S2: New G-Code Shortcuts Feb 28, 2023

CNC Router Tips Podcast Season 2 Episode 67:
New G-Code Shortcuts
New G-Code shortcuts that could save you time and improve your workflow. In this episode of the CNC Router Tips Podcast Bill Griggs shares the many new software tools and developments that could change the CNC Game for good.
Recent advances in computer hardware and software are having a rapid impact on how people use their CNC machines. Newer more advance Stepper and servo motors have made the machines more accurate and dependable. While changes in software have made the machines easier to operate.
No software advance has been as rapid as the introduction of AI artificial Intelligence to generate G-Code. Bill discusses his brief experience with AI generated G-Code and what it could mean to you.
If you would like more information about CNC Router tables you might enjoy joining the #CNC Router Tips Facebook group. This group has over 20,000 active members who share what they know about CNC Router tables and how to use them. If youu would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips
Sample of AI Generated G-Code Query
Prompt: write g-code to move a 1/4" bit from the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction. Plunge the bit down to -.25", and climb cut a two inch square. Retract the tool bit to a safe distance and return to the starting point.
Response:
Assuming that the machine is already set up and the workpiece is properly clamped, here is the G-code to move the 1/4" bit from the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction, plunge the bit down to -.25", climb cut a two-inch square, retract the tool bit to a safe distance and return to the starting point.
G90 ; Absolute positioning
G20 ; Units in inches
G0 X2 Y1 Z1.0 ; Move to the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction
G1 Z-0.25 F5 ; Plunge the bit down to -.25" at a feedrate of 5 inches per minute
G1 X2.5 Y1.5 F10 ; Climb cut a two-inch square at a feedrate of 10 inches per minute
G1 X2 Y1 Z1.0 F5 ; Retract the tool bit to a safe distance and return to the starting point
Please note that the feedrates and tool speeds specified in this code are just examples and may need to be adjusted based on the specific characteristics of the machine and the material being cut.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/67s2
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
ChatGPT https://chat.openai.com/chat
Open AI: https://openai.com/
Shopbot: https://www.shopbottools.com/
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured

CNCRT Episode 1 Season 2 Feb 22, 2023

CNC Router Tips Podcast Season 2 Episode 1: CNCRT1S2
Welcome to Season 2 of the CNC Router Tips Podcast. In this episode of the CNC Router Tips Podcast Bill Griggs talks about 3 new CNC Software packages that you can use to design programs tp run on your CNC Router Tables.
Bill also discusses what you can expect to hear on the second season of the CNC Route Tips podcast. From new information, techniques and tools you will have many new skills to learn and earn with.
If you would like more information about CNC Router tables you might enjoy joining the #CNC Router Tips Facebook group. This group has over 20,000 active members who share what they know about CNC Router tables and how to use them. If youu would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/S2E1
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured

CentroidCNC Acorn Update Nov 22, 2021

CENTROIDCNC ACORN UPDATE
CNC Router Tips Podcast Episode 65: CNCRT65
What is the CentroidCNC Acorn? The Acorn is a User Friendly, DIY CNC Control board for Milling Machines, Lathes, Routers Tables and other CNC Machines. In this episode of the CNC Router Tips Podcast Bill Griggs talks about his experiences with the CentroidCNC Acorn.
We discuss the Acorn Updates from the earlier version of the CNC Control board to the present version. Some of those features are more relays, status LEDs and removable header sockets. With CNC12 controller software users can control CNC router tables, Milling machines, lathes and more from the same basic interface with modifications for each type of machine.
Bill Griggs has also been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors.
If you would like more information about CentroidCNC, check out Episode 54. https://www.cncroutertips.com/54
The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/65
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured

CNCRT64 CNC Router Tips Is Back Nov 12, 2021

CNC ROUTER TIPS IS BACK
CNC Router Tips Podcast Episode 64
CNCRT64: CNC Router Tips Is Back
It has been a while but CNC Router Tips is back. In this episode we discuss the many changes and adventure that we have been working through since the last episode. Bill Griggs went back to school to study Entrepreneurship and grow his CNC Router Table Business. While this has been going on Bill learned a bunch about things he was doing wrong and how to do things better.
I have been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors. We discussed the CentroidCNC Acorn in Episode 54.
The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/64
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html
Mark Lindsay CNC https://marklindsaycnc.com
SmartScreens https://ngeneyes.com/smartscreen/licensing/
SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com

CNCRT63: CNC For Beginners with Mark Lindsay Aug 10, 2019

CNC FOR BEGINNERS WITH MARK LINDSAY
CNC Router Tips Podcast Episode 63
CNCRT63: CNC For Beginners With Mark Lindsay
I think you will enjoy this episode of the CNC Router Tips Podcast because you get to meet Mark Linsay of Mark Lindsay CNC. Mark Lindsay built his first CNC router using plans from Dave Gatton. Since then Mark has grown from a man needing help to a man giving help to the CNC community. His CNC tutorials on his Youtube channel have helped many CNC beginners to get squared away.
Mark Lindsey is the administrator of the CNC For The Beginner group on Facebook where nearly 9000 members meet and share information about CNC routers, milling machines and laser cutters. Members share information, files and opinions with each other.
Mark's interest in CNC router started when he wanted to build a Cigar Box guitar using a CNC router. Mark dived in and began researching how to build a CNC Router Table.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/63
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
Mark Lindsay CNC https://marklindsaycnc.com
Dave Gatton http://www.davegatton.com
SmartScreens https://ngeneyes.com/smartscreen/licensing/
SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
Mach3 Software http://www.themakersguide.com/home/products/mach3
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT62: 30 Days Could Change Your Life Feb 22, 2019

CNCRT62: 30 Days Could Change Your Life
CNC Router Tips Podcast Episode 62
Change doesn't have to take a long time. Bold action can be a shortcut to success. In this episode Bill Griggs explains how 30 Days Could Change Your Life. Bill just recently completed the ClickFunnels One Funnel Away Challenge. The OFA Challenge is a 30 day intensive training program that teaches you how to set up a Sales Funnel for your business.
The One Funnel Away Challenge course teaches you the belief system you need to be successful at starting an online business. It also teaches the systems, format and copy needed to tell your story in a way your customers will understand.
BIll Griggs and Kingsley Grant will be taking the challenge together with members of the audience who want to take their business to the next level with sales funnels. Why not take the Challenge with us?
If you would like to train with us and take the One Funnel Away Challenge you can join us at http://www.cncroutertips.com/ofachallenge.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/62
Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
One Funnel Away Challenge http://www.cncroutertips.com/ofachallenge
Podcast By Friday http://www.podcastbyfriday.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
CNC Zone http://www.cnczone.com
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
Microphones http://podcastbyfriday.com/mics
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT61: CNC Automation with Mike Gencarelli Dec 15, 2018

CNCRT61: CNC Automation with Mike Gencarelli
CNC Router Tips Podcast Episode 61
IN this episode we talk with my friend Mike Gencarelli about CNC automation. Mike Gencarelli is an experienced tool maker, automation expert, software developer and has probably one of the most interesting garage workshops.
Gencarelli writes about his adventures on his website https://mygarageshop.com/ where he displays his projects and talks about his machine shop which includes everything from CNC Router Table, Plasma cutter to milling machine.
Mike has built quite a wide variety of automated machines in his past. His work on an automated parachute harness sewing machine got him noticed Later he began work on a plasma table with a dual chamber water table and a removable 4th axis.
Mike Gencarelli decided that he wanted to automate some common CNC options to make them work better with Mach3. He developed software which allowed him to use multiple wifi relays to turn his equipment off and on. He hooked up his duct collection system, lights and water pumps to his SmartScreens Interface for Mach3 . SmartSreens for Mach3 integrates the control of simple to add Expansion Relays and Smart Wi-Fi Devices which can be controlled by SmartScreens through Mach3 via buttons on the screen, and MCodes in the GCode.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/60
Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
SmartScreens https://ngeneyes.com/smartscreen/licensing/
My Garage Shop https://mygarageshop.com/
SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
Towbot http://towbot.com
Velox http://velox.com
Video tour of My Garage Shop https://www.youtube.com/watch?v=kSltNI0Gi7o
Students Make a CNC Router Table https://www.youtube.com/watch?v=H_SFnWiSWiw
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
CNC Zone http://www.cnczone.com
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
OBS Studio https://obsproject.com/
Smove Mobile http://smove.com
Mastercam https://www.mastercam.com/en-us/
Stepcraft https://www.stepcraft.us/q
Microphones http://podcastbyfriday.com/mics
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT60: CNC Router Tips Podcast On Facebook Live Nov 16, 2018

CNCRT60: CNC Router Tips Podcast On Face Book Live
CNC Router Tips Podcast Episode 60
For the 60th episode of the CNC RouterTips Podcast we broadcast on Facebook Live. This is the first video episode of the podcast and we hope to add more video episodes in the future.
Broadcasting the CNC Router Tips Podcast on Facebook Live should reach a broader audience of CNC enthusiast who might not already be podcast listeners.
Bill Griggs discusses what he has been up to in CNC over the summer and what he has planned for the winter. Bill talked about his trips to the Podcast Movement Conference, MasterCam Education Summit and a field trip to Stepcraft US.
Then BIll discussed a bit of new equipment he got for creating podcast and video content. For video we look at the new SMOVE Mobile extendable smartphone stabilizer. This camera gimbal shoul make better quality shop videos without jitters.
Bill also discusses how he used OBS studio to create his Facebook Live Video. OBS Studio is an open Source broadcasting platform that is rapidly gaining popularity.
On the audio side of things, Bill Griggs talked about 3 amazing microphone you can use for all your podcasting and video recording without breaking the back. In fact all 3 of the mics discussed can be bought for around $110 total. For more information and an in depth examination of these mic check out Podcast By Friday Episode 39 with Bill Griggs and Kingsley Grant. http://www.podcastbyfriday.com/39.
Lastly in this episode we talk about BIll's new products and his soon to be released ebook.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/60
Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
CNC Zone http://www.cnczone.com
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
OBS Studio https://obsproject.com/
Smove Mobile http://smove.com
Mastercam https://www.mastercam.com/en-us/
Stepcraft https://www.stepcraft.us/q
Microphones http://podcastbyfriday.com/mics
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT:59 What Is The Best Way To Learn CNC? Jun 06, 2018

CNCRT59: What Is The Best Way To Learn CNC
CNC Router Tips Podcast Episode 59
In this episode of the CNC Router Tops Podcast, Bill Griggs answers a listener's question, "What is the best way to learn CNC? This is a very smart question although it may seem simple at first glance. The best way to learn CNC will be the most efficient, quickest and most thorough method. Learning CNC quickly while still getting all the bases covered is a real chore on your own.
When you decide to learn CNC you have to have your end goal in mind. A person wishing to learn CNC for a hobby will have different goals and time lines than a person who plans to use CNC to create a business. Focused precise topic are the best way to guarantee your success.
Learn what we recommend as the best way to learn CNC for your CNC Router Table and why.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/59
WEBSITES MENTIONED
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
CNC Zone http://www.cnczone.com
Titans Of CNC Academy http://academy.titansofcnc.com
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
NYCCNC https://www.nyccnc.com/
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT58: Adventures in Work Holding May 16, 2018

CNCRT 58: Adventures In Work Holding
CNC Router Tips Podcast Episode 58
Work holding is always an adventure for CNC Router Tables. In this episode of CNC Router Tips Bill Griggs tells you about his adventures in work holding.
We discuss the many types of work holding solutions from T-Track extrusion and clamps, double sided tape, modular plates, pallets systems, vacuum tables, Painters tape and instant glue, toggle clamps, eccentric clamps, vise, soft jaws and more.
If you can't hold your work piece securely you can not make a good finished part. We often spend more time figuring out how to hold the work piece than we do actually machining the piece.
In this episode we talk about many of the most popular CNC work holding strategies to help you conquer your adventures in work holding.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/58
Adventures In Work Holding
WEBSITES MENTIONED
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
CNC Zone http://www.cnczone.com
Youtube http://youtube.com
Shars Tool Company http://www.shars.com
Saundersmachineworks http://saundersmachineworks.com/
Pierson Workholding http://www.piersonworkholding.com/
Mitee Bite https://www.miteebite.com/
8020 Garage Sale http://stores.ebay.com/8020-Inc-Garage-Sale
The Makers Guide http://themakersguide.com
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources

CNCRT57: All About Limits Mar 11, 2018

CNCRT 57: All About Limits
CNC Router Tips Podcast Episode 57
It's all about limits. No really limits are what keeps chaos at bay on our CNC Router tables. In this episode of CNC Router Tips Podcast Bill Griggs answers a listener's question about limit switches and Home switches.
Shawn Jones asked, "When building a slaved Y axis machine, what is the convention for using limit/home switches? Are they need on both rails or on a single rail?"
In Episode 57 we explain how to hook up limit switches, homing switches for slaved axis machines and also why you might want a switch on each rail. We also examine reasons why you would not.
We also discuss the types of wire needed, where you can buy limit switches and also how many you would need.
We also discuss some of the upgrades I have planned for my CNC Router Table.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/56
Websites mentioned:
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
NYCCNC https://www.nyccnc.com/
Amazon http://www.amazon.com
Automation Technologies Inc https://www.automationtechnologiesinc.com
Automation Direct https://www.automationdirect.com
CNC4PC http://www.cnc4pc.com
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT56: When Should I Buy A CNC Router Table Feb 18, 2018

CNCRT 56: CNC ANSWERS
CNC Router Tips Podcast Episode 56
Bill Griggs answers a listener's question, "When Should I Buy A CNC Router Table? Before or after I retire?" Should you Buy a CNC Router table while you are still gainfully employed or should you wait until after you have retired. The answer may surprise you.
New in the shop is the Pierson Workholding Mini Pallet System. Here is the description used on the Pierson Workholding website. "The Mini Pallet System (MPS) is designed for the startup machinist where less aggressive machining and smaller work envelopes are the norm. The system is still built with the same robust components found in our flagship Pro Pallet System but with a lower starting price and simplified design. Choose from two pallet sizes - 6" x 10" or 8" x 14".
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/56
WEBSITES MENTIONED
The Makers Guide http://themakersguide.com
Pierson Workholding Tour https://www.youtube.com/watch?v=B8MQhX3QPEE
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
NYCCNC https://www.nyccnc.com/
Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Next Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating and write a review.

CNCRT 55: CNC Answers Feb 06, 2018

CNCRT 55: CNC ANSWERS
CNC Router Tips Podcast Episode 55
Bill Griggs discusses many of the questions asked by new members of the #CNC Router Tips Group on Facebook. In this episode we discover one of the most frequently asked questions of new CNC Router users.
We explore the growth of the podcast and a plan for future episodes. We also look at the progress I have made with my milling machine and why it is important to keep you up to date.
Lastly, I tell you about one of the most important books I have read, that is helping me to grow my podcast audience. Ryan Levesque is the author of Ask : The counterintuitive online formula to discover exactly what your customers want to buy... create a mass of raving fans... and take any business to the next level. I explain how I am using the information in this book to increase membership in my Facebook group and helps me to answer their questions .
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/54
ASK http://amzn.to/2E8h2sP
The Makers Guide http://themakersguide.com
Ryan Levesque http://askmethod.com/blog/
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
CentroidCNC http://centroidcnc.com
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.

CNCRT 54: CentroidCNC Acorn DIY CNC Controller with Keith McCulloch Dec 17, 2017

CNC Router Tips Podcast Episode 54
CNCRT 54: CENTROIDCNC ACORN DIY CNC CONTROLLER
with Keith McCulloch
Bill Griggs discusses the CentroidCNC new Acorn DIY CNC Controller with Keith McCulloch. Keith McCulloch is known online as CNCKeith for his many Youtube video tutorials about using the Centroid CNC line of products.
The Acorn CNC Controller is a high performance, industrial quality CNC control designed for the DIY market and a low price point. Acorn utilizes an integrated 1Ghz ARM Cortex A8 Motion Control CPU and communicates with a CNC PC via an Ethernet connection. You can control a wide variety of axis motors and drives through step and direction command signal using the Acorn Control board.
Many DIY makers have already used the Acorn for many types of machine tools such as: CNC milling machines, CNC routers, Plasma, Flame, CNC lathes and 3D printers. The Acorn is compatible with both stepper motor drives and Servo Motor drivers. It also works with Hybrid Steppers and servos such as the Clearpath Servo system and can be used with most any AC brushless servo motor drive packages such as: DMM, Delta, Estun, Teco, Teknic, Yaskawa and others. Any drive that accepts step and direction commands.
Most stepper motor drives are compatible with the Acorn board such as Gecko Drive of stepper and servo drives and Leadshine MX4660.
The Acorn also has 8 input pins and 8 opto-isolated outputs (2 relays and 6 pins), Analog 0-10V for Variable Frequency Drive and an encoder port.
Centroid CNC is located in Howard Pennsylvania and has been making CNC related projects since 1979. Centroid makes commercial machines and also provides solutions for thos who desire a DIY process for converting machines to CNC.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/54
Websites Mentioned
CentroidCNC http://centroidcnc.com
Grizzly Industrial http://grizzly.com
Gecko Drive Motor Controls http://www.geckodrive.com/
ClearPath Servo Systems https://www.teknic.com/
Bridgeport http://hardingeus.com
LMT Onsrud http://www.onsrud.com/
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Beagle Bone Green http://amzn.to/2AXVD42
SeeedStudio https://www.seeedstudio.com
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.
Author
Bill Griggs
Find us on Facebook

CNCRT 53: WHAT CNC QUESTIONS YOU SHOULD ASK Nov 02, 2017

What CNC Questions You Should Ask.
CAN YOUR REALLY CREATE A CNC SIDE HUSTLE?
Bill Griggs shares what he has been up to lately in the workshop and around town. From High School graduations to two weddings, Bill has been a busy man. But that hasn't stopped him from making some projects in the workshop.
Constructing a special CNC wedding project allowed us to experiment with some advanced Vectric Aspire 3D modeling tricks. We discuss how we used off the shelf clip art to create new, custom 3D objects and how wedding products might be a good basis for a side hustle.
With information from the new book from author Chris Guillebeau called Side Hustle From Idea To Income in 27 Days, Bill demonstrated how to apply the books principals to a CNC project.
For those that missed episode 52, Chris Guillebeau is an expert at starting multiple businesses with very little cash. In his New York Times Best seller " The $100 dollar Startup", Chris Chronicles the businesses of several bootstrap entrepreneurs who started successful businesses with very little capital.
CNC router can and are being used by thousands of people to build a CNC Side Hustle business.
We also celebrate reaching ten thousand members in the #CNC Router Tips Facebook group. With the growth of the group being so rapid we are noticing many frequently asked questions. So as a service to the group we are teaching how to utilize the search feature to find what you are looking for quickly and accurately.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/53
Chris Guillebeau http://chrisguillebeau.com
Side Hustle School http://sidehustleschool.com
Order Side Hustle http://amzn.to/2z86PXr
The $100 Startup http://amzn.to/2zr9A9d
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com

CNCRT 52: CNC Side Hustle with Chris Guillebeau Sep 09, 2017

CNC Router Tips Podcast Episode 52
CNCRT 52: CNC SIDE HUSTLE WITH CHRIS GUILLEBEAU
From Idea to Income in 27 days.
Bill Griggs talks with New Your Times Best seller author Chris Guillebeau about creating a CNC Side Hustle business. Chris Guillebeau is a world traveler, Entrepreneur and expert at starting multiple businesses with very little cash. In his New York Times Best seller " The $100 dollar Startup", Chris Chronicles the businesses of several bootstrap entrepreneurs who started successful businesses with very little capital. Guillebeau has traveled to every country in the world spreading his message that you don't need to be rich to start a business. You can use the skills you already have to create a decent income.
CNC router can and are being used by thousands of people to build a CNC Side Hustle business. We discuss with Chris Guillebeau how you can use the formula described in his latest book "Side Hustle - From Idea to income in 27 days" to start your CNC Side Hustle without a lot of cash.
I have been mentioning Chris Guillebeaus in my podcast all the way back to episode 1 of the CNC Router Tips podcast. It has been one of my goals to bring Chris Guillebeau on the show to discuss his unique observations about boot strapping a business. I hope you enjoy this episode as much as I enjoyed recording it.
Chances are if you are listening to this podcast, you either have or were considering getting a CNC Router table to grow your business or expand your hobby. Why not take a look at Side Hustle and see if the lessons described can help you get started?
Also in this episode we announce the winners of the 50th episode giveaway! To celebrate the 50th episode of CNC Router Tips Podcast we had a free Giveaway of CNC Router Tips, embroidered ball caps to 3 lucky winners.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/52
Websites Mentioned
Chris Guillebeau http://chrisguillebeau.com
Side Hustle School http://sidehustleschool.com
Preorder Side Hustle http://amzn.to/2gTV7KU
The $100 Startup http://amzn.to/2xkA632
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.
Author
Bill Griggs
Find us on Facebook

CNCRT 51: What's New In Vectric Aspire V9 Jul 31, 2017

CNC Router Tips Podcast Episode 51
CNCRT 51: WHAT"S NEW IN VECTRIC ASPIRE V9?
Bill Griggs talks about what's new in Vectric Aspire V9. Vectric just released it's newest version of all their software including V9 of Aspire. We take a look at the 6 new major features and several minor features that were added to the V9 release.
Vectric focused on making the drawing process easier, more powerful and quicker for the user by adding these six new features.
2 sided capabilities - Create two sided jobs and visualize them in the same session.
Smart cursor - A much easier way of drawing and aligning objects to geometry
Quick keys - Adds precision to your shape by allowing typed values while creating geometry
Turn & spin -The turn tool takes a profile and turns it, like a potter’s wheel. the spin tool is similar but rather than the profile being rotated along the horizontal line, the profile is rotated about the vertical line
Array copy toolpath - You can duplicate one or more toolpaths as a block based on the dimensions you enter in its properties
Mirror mode - Allows you to define a component level so that it mirrors all its components. one way of thinking is that you can place virtual mirrors in the center of your job, vertically and/or horizontally.
To celebrate our 50th episode of CNC Router Tips Podcast we are having a free Giveaway. If you would like a chance to win a CNC Router Tip ball cap go to http://cncroutertips.com/50
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/51
Websites Mentioned
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.
Author
Bill Griggs
Find us on Facebook

PBF025 Podcast Recording And Video Software Jul 09, 2017

Podcast Recording And Video Software
By Bill Griggs and Kingsley Grant
Podcast By Friday Episode 25:
In this episode we discuss Podcast Recording and Video software. What podcasting recording software we use to record our show and why we use it. We also talk about how to use video recording software to generate content for your show. Tips on how to maximize the usefulness of each episode so that you can share your content in multiple formats on multiple platforms. Learn how to re-purpose your content on Youtube, Facebook and more.
Your hosts Kingsley Grant and Bill Griggs talk about their workflow and how they use Podcast recording software to record this show while located in two different states.
Artwork For Your Podcast
Here is some of what we covered:
Podcast recording and video software we use:
Recording Software:
Audacity
Garage Band
Pamela For Skype
Call Recorder For Skype
Vodburner
Adobe Audition
Camtasia Studio
*some of the links above are affiliates
Podcast by Friday is a show that helps people create their Minimal Viable Podcast (TM) by taking bold action to defeat procrastination and get their voices heard.
Bill Griggs contact info:
Twitter: @BillGriggs
Websites: http://podcastbyfriday.com
http://cncroutertips.com
Kingsley Grant's Contact info:
Twitter:@kingsleygrant
Website: http://podcastbyfriday.com
http://smoothcareerchange.com
http://kingsleygrant.com
SHOW NOTES Mentioned:
http://podcastbyfriday.com/19
http://podcastbyfriday.com/20
http://podcastbyfriday.com/21
http://podcastbyfriday.com/22
http://podcastbyfriday.com/23
http://podcastbyfriday.com/24
http://podcastbyfriday.com/25
Websites Mentioned
WP Profit Builder http://podcastbyfriday.com/builder
Wordpress Hosted http://wordpress.com
Wordpress Self Hosted http://wordpress.org
iTunes www.apple.com/itunes/
Spreaker http://spreaker.com
Podcast By Friday http://podcastbyfriday.com
CNC Router Tips http://cncroutertips.com
Smart Passive Income http://smartpassiveincome.com
Internet Business Mastery http://internetbusinessmastery.com
Facebook Group http://facebook.com/groups/podcastbyfriday
Youtube http://youtube.com
Vodburner http://podcastbyfriday.com/vodburner
How to leave a review on iTunes
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating. Then write a review Just a few words.
Podcast By Friday Episode 14

CNCRT 50: CNCNUTZ WITH PETER PASSUELLO Jul 07, 2017

CNCNUTZ WITH PETER PASSUELLO
CNC Router Tips Podcast Episode 50
CNCRT 50: CNCNUTZ WITH PETER PASSUELLO
CNC Youtube Content Creator
In this 50th episode of CNC Router Tips Podcast we talk with CNCNutz Peter Passello from Greymouth New Zealand. Peter is a CNC Youtube content creator and a very innovative inventor.
Bill Griggs celebrates his 50th episode by interviewing long time online friend Peter Passuello. We discuss the similarity of how we got into CNC even though we are half way around the world from each other.
Peter Passuello began his CNC Journey by building his first machine himself. He used locally available materials to substitute for hard to get parts. Being located on an island country makes getting parts expensive and difficult.
To celebrate our 50th episode of CNC Router Tips Podcast we are having a free Giveaway. If you would like a chance to win a CNC Router Tip ball cap go to http://cncroutertips.com/50
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/49
Websites Mentioned
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com
CNCNUTZ: https://www.youtube.com/user/cncnutz
John Kleinbauer http://crankorgan.com
Joescnc http://joescnc.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.
Author
Bill Griggs
Bill Griggs 11,003 followers
Find us on Facebook

CNCRT 49: AT IT AGAIN Jun 03, 2017

CNC Router Tips Podcast Episode 49
CNCRT 49: AT IT AGAIN
Well we are at it again. We are answering your questions about CNC Router Tables and business. Catch up with Bill Griggs and find out what he has been up to in the work shop.
We talks about shop safety, When to use a Down spiral bit, the dangers of leaving you machine unattended and more. We also discuss teh Atlanta Woodworking show.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/48
Websites Mentioned
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Haas Automation http://haascnc.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 48: Leasing CNC Equipment To Grow Your Business With Lucy Burke Mar 28, 2017

CNC Router Tips Podcast Episode 48
CNCRT: 48 Leasing CNC Equipment To Grow Your Business With Lucy Burke
Leasing CNC Equipment To Grow Your Business is a valid strategy for financing. We chat with Lucy Burke of North Star Leasing about using Leasing as an option to grow your business.
Leasing can have many advantages and a few challenges. we discuss all that and more.
This episode is part of a series that discusses some of the key systems you need to set in place before you start a small business.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/48
Websites Mentioned
North Star Leasing http://www.northstarleasing.com/
Grimsmo Knives http://grimsmoknives.com
Father Ed's https://www.gofundme.com/fr-eds-cnc-repair-replacement
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Haas Automation http://haascnc.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT: 47B Visualize Your Perfect CNC Business With John Grimsmo Mar 26, 2017

CNC Router Tips Podcast Episode 47B
CNCRT: 47B Visualize Your Perfect CNC Business With John Grimsmo.
We continue our chat with John Grimsmo, Custom Knife maker and Youtube Star. John shares how he uses Visualization to create your Perfect CNC Business.
We have watched the growth of his company Grimsmo Knives through his many Youtube videos. Grimsmo started building his business with less than $5000 in equipment and grew it into over a half million in equipment through the sales of his custom knives.
Visualizing exactly what you want can really shorten the time needed to achieve your goals.
This episode is part of a series that discusses some of the key systems you need to set in place before you start a small business.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/47B
Websites Mentioned
Grimsmo Knives http://grimsmoknives.com
Father Ed's https://www.gofundme.com/fr-eds-cnc-repair-replacement
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Haas Automation http://haascnc.com
Blade Show http://www.bladeshow.com/
Getting Things Done http://amzn.to/2n4wnNI
Profit First http://amzn.to/2n4nsfa
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 47: Sharing And Growing A CNC Business On Youtube With John Grimsmo Mar 19, 2017

CNC Router Tips Podcast Episode 47
CNCRT: 47
Sharing And Growing A CNC Business On Youtube With John Grimsmo.
John Grimsmo has been sharing and growing his CNC business On Youtube for several years. We have watched the growth of his company Grimsmo Knives through his many Youtube videos. Grimsmo started building his business with less than $5000 in equipment and grew it into over a half million in equipment through the sales of his custom knives.
John Grimsmo has shown every aspect of growing his CNC business on Youtube. With nearly 50 thousand subscriber and millions of viewers he has brought machining to the masses. Grimsmo Knives created a series of custom made knives that enjoy a large following.
This episode is part of a series that discusses some of the key systems you need to set in place before you start a small business.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/47
Websites Mentioned
Grimsmo Knives http://grimsmoknives.com
Tormach http://tormach.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Haas Automation http://haascnc.com
Blade Show http://www.bladeshow.com/
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 46: When Your Home Based Business Needs Commercial Insurance Mar 10, 2017

CNC Router Tips Podcast Episode 46
CNCRT 46: When Your Home Based Business Needs Commercial Insurance.
When your home based business needs commercial insurance you should talk to an agent who specializes in commercial insurance. We chat will Bill Basher of the Tanner Insurance Agency Inc. about insuring your home based business, the differences between Commercial insurance and home owners insurance and what actions trigger the need for Commercial insurance.
This episode is part of a series that discusses some of the key systems you need to set in place before you start a small business.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/46
Websites Mentioned
Maker Masters http://makermasters.com
Tormach http://tormach.com
Tanner Insurance Agency Inc. http://tiains.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 45: Why I Bought A Tormach CNC Milling Machine Feb 03, 2017

CNC Router Tips Podcast Episode 45
Why I Bought A Tormach CNC Milling Machine.
I just bought a Tormach CNC Milling machine. In this episode I discuss why I bought a Tormach CNC Milling Machine, what my thought process was and how I plan to use it to build my business.
The Tormach PCNC 1100 is a CNC milling machine with a 5100 RPM 1.5 HP spindle. It has a work envelope of 18" x 9.5" x 16.25" (X,Y,Z). It has a 34” x 9.5” table and weighs about 1300 pounds. My mill includes a power draw bar, automatic tool; changer and a full enclosure.
We also discuss some of the key systems you need to set in place before you start a small business. We discuss a new series of episodes which will tackle these topics.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/45
Websites Mentioned
Maker Masters http://makermasters.com
Tormach http://tormach.com
North Star Leasing http://northstarleasing.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT44: Build Your Own Makerspace Jan 09, 2017

CNC Router Tips Podcast Episode 44
Build Your Own Makerspace with Mike Heidrick.
In the episode we talk with Mike Heidrick about why you should build your own makerspace. After trying unsuccessfully to work with local government to bring a makerspace to his community, Mike Heidrick decided to build his own makerspace. Aptly named the Mikeyspace, Mike built a 40’X64’X16’ polebarn with a 10’X24’ porch - two 14’X14’ overhead doors, 3 pedestrian doors, and 4 36”X48” double hung windows, and 5" thick concrete floor with radiant heat. The project has taken nearly 3 years to complete but features a full CNC machine shop, CNC woodworking shop, welding equipment and a drive in theater. And this is just the start.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/44
Websites Mentioned
Joes CNC http://joescnc.com
Maker Masters http://makermasters.com
The Makers Guide http://themakersguide.com
Habitat For Humanity Restore http://www.habitat.org/restores
Bloomingtonmike Youtube Channel. https://www.youtube.com/user/bloomingtonmike
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT43: Finding Your Audience With Bob Warfield. Dec 26, 2016

CNC Router Tips Podcast Episode 43
Finding Your Audience With Bob Warfield.
Finding your audience is a key step before you design your product. Knowing what it is that your audience needs and what problems they have are key designing a solution. We talk with Bob Warfield, Software Startup founder, Former Borland VP of Engineering and Solo-preneur about his passion project CNC Cookbook and the GWizard Calculator software.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/43
Websites Mentioned
Podcast By Friday http://podcastbyfriday.com
Maker Masters http://makermasters.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Cook Book http://cnccookbook.com
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 42: What would Henry Do? Words of Wisdom From Henry Ford. Dec 16, 2016

CNC Router Tips Podcast Episode 42
What would Henry Do? Words Of Wisdom From Henry Ford.
What would Henry Do? I ask myself this question whenever I have a tough decision to make. If you have ever struggled with the decision to buy a CNC Router or other machines this episode may help you. We examine what risks and advantages are when purchasing new equipment. We also talk about the opportunity cost of not making a decision when you have to.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/41
Websites Mentioned
Podcast By Friday http://podcastbyfriday.com
Spreaker http://spreaker.com
Maker Masters http://makermasters.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
Smart Passive Income http://smartpassive income.com
Henry Ford Museum http://thehenryford.org
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 41: How Much Should You Charge For CNC Work? Nov 10, 2016

CNC Router Tips Podcast Episode 41
How Much Should You Charge For CNC Work?
How much should you charge for CNC Work? This question comes up all the time. We look at what the average wage is for a CNC machine operator versus what the average shop rate is for a machine owner. If you are using your CNC Router as a business you have to think more like an owner than an operator. You are the CEO of your company not an employee. You have assumed all the risk and so should receive the rewards. Or should you?
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/41
Websites Mentioned
Podcast By Friday http://podcastbyfriday.com
Spreaker http://spreaker.com
Maker Masters http://makermasters.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNCZONE http://cnczone.com/
Lumberjocks http://lumberjocks.com
McDonald’s wages: http://www.indeed.com/cmp/McDonald's/salaries
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 40: Should You Buy Or Build A CNC Router Oct 26, 2016

CNC Router Tips Podcast Episode 40
Should You Buy or Build A CNC Router?
Should you Buy a CNC Router Table or Build one? This question come up quite a bit and can have a variety of answers depending on your ultimate goal.
People who are using a CNC Router Table to build a business may have a very different answer than someone who is using one as a hobby.
Time and money are also big deciding factors to consider when getting a CNC Router Table.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/40
Websites Mentioned
Podcast By Friday http://podcastbyfriday.com
Spreaker http://spreaker.com
CNC Router Parts http://cncrouterparts.com
JOES CNC http://joescnc.com
Maker Masters http://makermasters.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

How To Set Native Units In Mach3 CNC Software Sep 29, 2016

If you want your CNC Router table to uses inches or millimeters you will need to know how to set native units in mach3 cnc software.
I will show you how to easily change between millimeter and inches. I will show you step by step what to do and what not to do.
After you set up the native units you can use my other videos tutorials to show you how to set up the number of steps per unit automatically.

CNCRT: 39 How To Surface Your Spoil Board Sep 09, 2016

CNC Router Tips Podcast Episode 39
How To Surface Your Spoil Board
One question that always pops up from beginners is how to surface your spoil board. In this edition of the CNC Router Tips Podcast we show the ins and out of this process. We discuss the types of router bits to use and how fast they need to spin. We also talk about a CNC Router Bit starter set and much more.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/39
Websites Mentioned
Stepcraft http://stepcraft.us
Podcast By Friday http://podcastbyfriday.com
Spreaker http://spreaker.com
Maker Masters http://makermasters.com
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
CNC Milling Machine blog http://makermasters.com/how-to-make-your-own-cnc-milling-machine
Small Planing bit. Magnate ¾” Bit http://amzn.to/2cfY4hp
Medium Planing bit Magnate 1 ¼” bit http://amzn.to/2bYYwVM
Large Planing Bit Magnate 3” bit http://amzn.to/2cfZx7x
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 38: Sienci Mill One Desktop CNC Aug 30, 2016

CNC Router Tips Podcast Episode 38
Sienci Mill One Desktop CNC Mill
We take a look at the Sienci Labs Mill One, Desktop CNC Mill. Developed by two College students and offered on Kickstarter, The Mill One is fast on it’s way to reaching it’s fuunding Goal of $60,000 Canadian dollars. The compact milling machine with enclosure is a low cost way to get started with CNC machining.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/38
Websites Mentioned
Sienci Labs http://sienci.com
Kiri-moto http://grid.space
Onshape http://onshape.com/
The Summer Company http://waterlooregionsmallbusiness.ca/summercompany
Kickstarter http://kickstarter
Shapeoko - http://carbide3d.com/shapeoko/
UCCNC Software http://cncdrive.com/UCCNC.html
Mach3 Software http://www.themakersguide.com/home/products/mach3
8020 Aluminum Extrusions http://8020.net
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 37: First Look At Stepcraft 2-600 Desktop CNC Router Aug 26, 2016

CNC Router Tips Podcast Episode 37
First Look Stepcraft 2 – 600
In this episode of the CNC Router Tips Podcast we take a first look at the Stepcraft 2 -600 desktop CNC Router Table.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/37
Websites Mentioned
Shapeoko - http://carbide3d.com/shapeoko/
Grizzly Industrial http://Grizzly.com
Hoss G0704 DVD Set http://g0704.com
Stepcraft http://stepcraft.us
CNC Router Tips http://cncroutertips.com/18
UCCNC Software http://cncdrive.com/UCCNC.html
8020 Aluminum Extrusions http://8020.net
Makerslide https://www.inventables.com/technologies/makerslide
IOT Relay http://amzn.to/2bmbpUm
IOT Relay http://cncroutertips.com/relay
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Resources http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 36: Straight As A Rail Jul 26, 2016

CNC Router Tips Podcast Episode 36
Straight As A Rail.
How To Align Linear Rails
CNC Router Tips Podcast looks at how to align your linear rails to make your CNC Router table more accurate. Also whe hear from the winner of the VCarve Desktop Software Giveaway, discuss makerspaces including a looked in on the Pumping Station One Makerspace in Chicago.
Q: HI Bill, My names Bryce Stoddart from Australia. My question is; Do you have any tips or tricks for aligning the rails in both directions and either side for a home-made CNC?
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/36
Websites Mentioned
CNC ROUTER BIT STARTER SET http://cncroutertips.com/bits
Resources Page http://cncroutertips.com/resources
Demo Software http://cncroutertips.com/demo
VCarve Pro http://themakersguide.com/vcarve8
Prumping Station One Makerspace https://pumpingstationone.org/
Podcast Movement http://podcastmovement.com/
MSCdirect https://www.mscdirect.com
Mcmaster Carr http://www.mcmaster.com/
Amazon https://www.amazon.com/
Harbor Freight http://www.harborfreight.com/
Themakermap http://themakermap.com/
Urbana Makerspace https://makerspaceurbana.org/
Salt Makerspace http://saltmaker.org
SU Makerspace http://makerspace.syr.edu
Faro http://www.faro.com/products/metrology/faroarm-measuring-arm/overview
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 35: What I Learned In Chicago. Jul 15, 2016

CNC Router Tips Podcast Episode 35
What I Learned In Chicago.
Podcast Movement 2016
I took a trip to Chicago for the 2016 Podcast Movement Conference. While I was there I learned about taking bold action to move your project along. I also looked in on the Pumping Station One Makerspace.
Also in this episode we announce the winners in the VCarve Desktop giveaway to celebrate reaching 3000 members in the #CNC Router Tips Facebook Group. You can see the winners at http://cncroutertips.com/contest.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/35
Websites Mentioned
Giveaway http://cncroutertips.com/contest
CNC ROUTER BIT STARTER SET http://cncroutertips.com/bits
Bill Griggs Youtube Channel https://www.youtube.com/user/bgriggstwcny/channels
Resources Page http://cncroutertips.com/resources
Demo Software http://cncroutertips.com/demo
VCarve Pro http://themakersguide.com/vcarve8
Prumping Station One Makerspace https://pumpingstationone.org/
Podcast Movement http://podcastmovement.com/
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 34: CNC Router Bit Starter Set Jul 03, 2016

CNC Router Tips Podcast Episode 34
CNC Router Bit Starter Set.
In this episode we look at the best bits to have in your CNC Router Bits Starter Set. We look at what each types of bit does. We will put together a list of the most commonly used bits and what would make up a good starter pack.
Q: Can you go over what would be a good starter pack for someone in terms of bits, that are endmills ballmills tapered mills two flute, 4 flutes, carbide, coated carbide all kinds of features, 1/8” ½” whatever.
A: http://cncrouterbits.com/bits
Also in this episode we talk a bit more about the VCarve Desktop giveaway to celebrate reaching 3000 members in the #CNC Router Tips Facebook Group. You can enter at http://cncroutertips.com/contest.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/34
Websites Mentioned
Giveaway http://cncroutertips.com/contest
CNC ROUTER BIT STARTER SET http://cncroutertips.com/bits
Bill Griggs Youtube Channel https://www.youtube.com/user/bgriggstwcny/channels
Resources Page http://cncroutertips.com/resources
CMT Router Bits http://www.cmtutensili.com/
Magnate Router Bits https://www.magnate.net/
Amazon Associates https://affiliate-program.amazon.com/
Demo Software http://cncroutertips.com/demo
VCarve Pro http://themakersguide.com/vcarve8
Makermasters http://makermasters.com
The Makers Guide Blog http://www.themakersguide.com/cnc-router-bit-starter-set
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 33: Comparing Six CNC Router Tables Jun 26, 2016

CNC Router Tips Podcast Episode 33
Comparing Six CNC Router Tables.
In this episode we discuss and compare six different CNC Router Tables. We examine the question asked by our listener James Trimble about differences in CNC Router tables, what they were designed to do and how they stack up against each other.
Q: My question is regarding the differences between different levels of machines. I am currently building the mostly printed CNC which is an extremely low budget machine. But one that I think presents a lot of learning and hobby opportunities. My question is, what kind of limitations I will encounter in a machine like this. And what limitations and benefits will you find in different levels of machines ranging from other DIY builds like the Ox or Joescnc, all the way up to the full spectrum of commercial options such as the Stepcraft, Hytek Tools or even heavy industrial machines?.
Also in this episode we talk a bit more about the VCarve Desktop giveaway to celebrate reaching 3000 members in the #CNC Router Tips Facebook Group. You can enter at http://cncroutertips.com/contest.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/33
Websites Mentioned
Mostly Printed CNC http://Vicious1.com
Bill Griggs Youtube Channel https://www.youtube.com/user/bgriggstwcny/channels
Resources Page http://cncroutertips.com/resources
OpenBuilds OX http://openbuilds.com
Hytek Tools http://cncroutertips.com/27
Joes CNC http://cncroutertips.com/24
Stepcraft http://cncroutertips.com/18
Giveaway http://cncroutertips.com/contest
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
Stepcraft. https://stepcraft.us/
Hytek Tools https://www.hytektools.com/
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 32: IS IT OK TO USE OTHER PEOPLE'S WORK? Jun 10, 2016

CNC Router Tips Podcast Episode 32
Is it OK to use other’s people’s work?
In this episode we discuss intellectual property and answer the question “ Is it OK to Use Other People’s Work”? We examine what intellectual property is and how to respect the work of others.
Also in this episode we talk a bit more about the upcoming contest to celebrate reaching 3000 members in the #CNC Router Tips Facebook Group. You can enter at http://cncroutertips.com/contest.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/32
Websites Mentioned
Bill Griggs Youtube Channel https://www.youtube.com/user/bgriggstwcny/channels
Resources Page http://cncroutertips.com/resources
http://copyright.gov/forms
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://cncroutertips.com/31
http://cncroutertips.com/contest
http://legalzoom.com
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 31: What is A Variable Frequency Drive - VFD? May 15, 2016

CNC Router Tips Podcast Episode 31.
What is a Variable Frequency Drive - VFD ?
In this episode we answer the question “What is a Variable Frequency Drive (VFD)”? We examine how the work and how they can be used to control a 3 Phase industrial motor from common household current. We also discuss salvaging older machine tools through the use of a Variable Frequency Drive.
Also in this episode we talk a bit more about the upcoming ROI Challenge and also announce a contest to celebrate reaching 3000 members in the #CNC Router Tips Facebook Group.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/31
Websites Mentioned
Bill Griggs Youtube Channel https://www.youtube.com/user/bgriggstwcny/channels
Resources Page http://cncroutertips.com/resources
http://VFD.com
http://www.cnczone.com/forums/spindles-vfd/117782-huanyang-chinese-vfd-settings-manual-9.html
https://en.wikipedia.org/wiki/Variable-frequency_drive
https://www.joliettech.com/products/variable-frequency-drive-systems-and-controls/what-is-a-variable-frequency-drive-part-1/
http://chrisguillebeau.com/category/100-startup/
http://ebay.com
http://amazon.com
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.com
http://cncroutertips.com/30
http://cncroutertips.com/contest
VIDEO RESOURSES
VFD 101 Basics
https://youtu.be/YA-6TNhFsE4
2.2KW spindle & VFD operating
https://youtu.be/ril8CI5he00
How to set up a Chinese Spindle
https://youtu.be/pPhCGVq8aGE
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 30: Looking Back At What Is Ahead Apr 23, 2016

CNC Router Tips Podcast Episode 30
A LOOK BACK AT WHAT IS AHEAD
In this episode we take a look back at the previous episodes and where we have been in our CNC journey. Now we will focus on the next phase.
Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://cncroutertips.com
SHOW NOTES: http://cncroutertips.com/30
Websites Mentioned
Podcast For Makers - http://podcastformakers.com
Jesse Hughson - https://www.instagram.com/cyrcraftcustoms/
Maker Faire Rochester - http://makerfairerochester.com/
Bill Griggs Youtube Channel https://www.youtube.com/user/bgriggstwcny/channels
Resources Page http://cncroutertips.com/resources
http://chrisguillebeau.com/category/100-startup/
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.com
http://vectric.com
http://themakersguide.com
https://youtu.be/dhmfnea0vVA
http://www.cncroutertips.com/xbox360
http://www.spreaker.com/user/billgriggs/building-a-business-family-around-cnc-ro
http://www.spreaker.com/user/billgriggs/cncrt-17-rebuilding-helping-giving-recei
http://www.spreaker.com/user/billgriggs/cncrt-18-how-he-raised-510-497-with-cnc-
http://kickstarter.com
http://www.cncroutertips.com/24
http://joescnc.com
http://cncroutertips.com/27
http://cncroutertips.com/28
http://cncroutertips.com/29
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 29: Maker Jon Berard Mar 28, 2016

CNC Router Tips Podcast Episode 29
Maker Jon Berard
In this episode we talk with Jon Berard, host of the Podcast for Makers about his mission to introduce young people to the world of making and manufacturing. Jon Berard is a skilled machinist and craftsman who enjoys making all varieties of projects from woodworking, forging, metalworking and more.
Jon Berard’s contact info:
Twitter: @podcast4makers
Website: http://podcastformakers.com
SHOW NOTES: http://cncroutertips.com/29
Websites Mentioned
Dyami Plotke – http://www.modernwoodworkersassociation.com/
NYCCNC - http://www.nyccnc.com
The Other Mill - https://othermachine.co/othermill/features/
BOXZY - https://www.kickstarter.com/projects/boxzy/boxzy-rapid-change-fablab-mill-laser-engraver-3d-p
Todd Bailey - http://www.podcastformakers.com/todd-bailey/
Bill Griggs - @BillGriggs
Zach Kaplin Inventables - https://www.inventables.com/
Podcast For Makers - http://podcastformakers.com
Makercast Free Gift http://podcastformakers.com/gift
Joel Boggis The Relauch Podcast - http://relaunchshow.com/
Tormach - http://tormach.com
John Grimso – Grimsmo Knives - https://www.youtube.com
/user/JohnGrimsmo
Jesse Hughson - https://www.instagram.com/cyrcraftcustoms/
Maker Faire Rochester - http://makerfairerochester.com/
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.com
http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 28: CNC Startup Circus with Jesse Hughson Mar 16, 2016

CNC Startup Circus with Jesse Hughson
In this episode we talk with Jesse Hughson, Designer, Performer and Entrepreneur about his Circus equipment startup business Cyrcraft Customs. http://cyrcraft.com. Jesse explains how his love of Street performance art, Making helped him escape the 9-5 rat race to develop a CNC business making custom made Circus equipment.
Show Notes : http://cncroutertips.com/28
Websites Mentioned
Corbin Dunn - http://www.corbinstreehouse.com/
TinyG CNC Controller wiki - https://github.com/synthetos/TinyG/wiki
Synthatos- http://synthetos.myshopify.com/
Ox CNC Machine. http://www.openbuilds.com/builds/openbuilds-ox-cnc-machine.341/
Open Builds – http://www.openbuilds.com
Shapeoko - http://carbide3d.com/shapeoko/
ChiliPeppr - http://chilipeppr.com/
Seth Godin - http://www.sethgodin.com/sg/
Petique Phillipe. 2.6 Million dollar watch - https://youtu.be/Bu_hQ20esuQ
The Miracle Morning – Hal Elrod - http://amzn.to/1Xo8SLK
John Grimso – Grimsmo Knives - https://www.youtube.com/user/JohnGrimsmo
2 Second Lean- Paul Akers http://amzn.to/1LhThMR -
Hugh O’Brian Youth Leadership - http://hoby.org
Cyrcraft Customs - http://cyrcraft.com/
https://www.youtube.com/watch?v=wWlB_W-rSTI
https://www.instagram.com/cyrcraftcustoms/
https://www.instagram.com/p/BBTboqRPDU7/?taken-by=cyrcraftcustoms
https://www.youtube.com/channel/UCQa3Yy08iX4vyFGkz9MF4Hg
https://youtu.be/zncOyuGTYVM
https://www.instagram.com/p/8VqHlzvDYY/?taken-by=cyrcraftcustoms
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.com
http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 28: CNC Startup Circus with Jesse Hughson Mar 16, 2016

CNCRT 27: Have You Met Ms. Jones? Feb 24, 2016

CNC Router Tips Podcast Episode 27
Have you met Ms. Jones?
In this episode we speak with Melissa Jones, sign maker to the stars. Melissa explains how she and her husband built a thriving sign making business using both hand carved and CNC routed signs. Melissa Jones has made signs for many Hollywood films and television. Let’s hear about her latest venture importing CNC Router tables and Laser Cutters.
SHOW NOTES: http://cncroutertips.com/27
Websites Mentioned
http://nicecarvings.com
http://hytektools.com
http://blindart.us
http://cncroutertips.com/demo
http://linkedin.com
https://www.youtube.com/watch?v=-10i_87lxls
https://www.youtube.com/watch?v=SZeSa6vGsWc
https://www.youtube.com/watch?v=LPEZB3pQiUY
http://themakersguide.com/vcarve8
http://themakersguide.com
http://cncroutertips.com/resources
How to leave a review on iTunes
Watch the video:
https://www.youtube.com/watch?v=ePmqvETUH7A
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 26: He built a YouTube following with CNC. Feb 11, 2016

CNC Router Tips Podcast Episode 26
In this episode we speak with Dave Gatton of GarageworxCNC.com about his adventures in Youtube, and how he built a Youtube following with CNC. Dave talks about his free CNC plans and paid machines kits plus his Free CNC Giveaway.
http://cncroutertips.com/freecnc.
Show notes: http://www.cncroutertips.com/26
WEBSITES MENTIONED
Sidewinder CNC - http://cncsidewinder.com
Mach3 Software - http://www.themakersguide.com/home/products/mach3
CNC Zone - http://cnczone.com
Youtube - https://www.youtube.com/watch?v=1UZQGdHCTGc
Flip Ultra Video Camera - http://amzn.to/1Qacko4
Canon T5i Camera - http://amzn.to/20YjOlM
Garageworx CNC - http://www.garageworxcnc.com/
Russell Claridy - Let's Talk Shop With Russ. Live Drawing on Show. http:cncroutertips.com/freecnc
http://www.garageworxcnc.com/garageworx-cnc-giveaway.html
Simply Wooden Creations - http://www.simplywoodencreations.com/
GarageworxCNC - http://www.garageworxcnc.com/garageworx-cnc-giveaway.html
JTech Photonics - http://jtechphotonics.com/?page_id=126
CNC Nutz Laser shoe - https://www.youtube.com/watch?v=MWya4-3REs0
Vectric CNC Software http://vectric.com
Free Downloads - http://cncroutertips.com/demo
My other websites
The Makers Guide - http://themakersguide.com
Makermasters - http://makermasters.com
#CNC Router Tips Facebook Group - https://www.facebook.com/groups/309368045878303/
This is part of a series of interviews with people who have created CNC Startup businesses.
Dave Gatton Contact Info:
Email - dave@garageworxcnc.com
website: http://garageworxcnc.com
http://cncroutertips.com/freecnc
HOW TO LEAVE A REVIEW ON iTUNES
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating.
Then write a review.

CNCRT 25: He Gained By Giving. Part 2 Feb 05, 2016

CNC Router Tips Podcast Episode 25
In this episode we hear the second part of our talk with Joe Cantrill of JoesCNC.com. Joe started out giving away free plans to his CNC Router Table and then built a business and a community around them. Now we will hear about his latest projects and what he has planned for the future and take a glimpse at his latest machine.
Show notes at http://cncroutertips.com/25
This is part of a series of interviews with people who have created CNC Startup businesses.
Joe Cantrill Contact Info:
Email - joecnc2006@yahoo.com
website: http://joescnc.com
WEBSITES MENTIONED
CNC Zone - http://cnczone.com
Joe's CNC - http://joescnc.com
Youtube - https://www.youtube.com/watch?v=1UZQGdHCTGc
HobbyCNC - http://hobbycnc.com
Donek drag knife - http://donektools.com
John Kleinbauer Plans - http://www.crankorgan.com/
Vectric CNC Software http://vectric.com
IMService - http://www.cadcamcadcam.com/toolchanger.aspx
Free Downloads - http://cncroutertips.com/demo
Joescnc Router Plans - http://joescnc.com
Morrisville State College Video - https://www.youtube.com/watch?v=H_SFnWiSWiw
Velox CNC Routers - http://www.veloxcncrouters.com/
CNC Router Parts - http://cncrouterparts.com
My other website http://themakersguide
Super PID - http://www.vhipe.com/product-private/SuperPID-Home.htm
Mechmate - http://mechmate.com
Makermasters - http://makermasters.com
Kent CNC Dust Shoes - http://kentcnc.net
Harbor Freight - http://harborfreight.com
Legal Eagle Ultralight - http://www.betterhalfvw.com/
#CNC Router Tips Facebook Group - https://www.facebook.com/groups/309368045878303/
HOW TO LEAVE A REVIEW ON iTUNES
Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click "View in iTunes"
Click on ratings and reviews in iTunes
Click the "Write a Review" button
Leave an honest rating.
Then write a review.

CNCRT 24: He Gave Away Free Plans And Gained So Much More. Feb 02, 2016

CNC Router Tips Podcast Episode 24
Joe Cantrill - He Gave Away free Plans And Gained So Much More.
In this episode we talk with Joe Cantrill of JoesCNC.com. Joe started out giving away free plans to his CNC Router Table and then built a business and a community around them.
Show Notes: http://www.cncroutertips.com/24
CNC Zone - http://cnczone.com
Joe's CNC - http://joescnc.com
Youtube - https://www.youtube.com/watch?v=1UZQGdHCTGc
HobbyCNC - http://hobbycnc.com
Donek drag knife - http://donektools.com
John Kleinbauer Plans - http://www.crankorgan.com/
Vectric CNC Software http://vectric.com
IMService - http://www.cadcamcadcam.com/toolchanger.aspx
Free Downloads http://cncroutertips.com/demo
Joescnc Router Plans http://joescnc.com
Morrisville State College Video - https://www.youtube.com/watch?v=H_SFnWiSWiw
Velox CNC Routers http://www.veloxcncrouters.com/
My other website http://themakersguide.com
Ferris Mowers http://www.ferrismowers.com/us/en
Super PID - http://www.vhipe.com/product-private/SuperPID-Home.htm
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 23: Top CNC Router Table Plans Jan 16, 2016

Top CNC Router Table Plans.
In this episode we discuss Michael DeAllessio’s question, What are the Top CNC Router Table Plans. Here are some of the most popular CNC Router table plans currently available.
Websites Mentioned
http://joescnc.com
http://www.cncsidewinder.com/
http://www.cncrouterparts.com
http://solsylva.com/
http://mechmate.com/
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.com
http://cncroutertips.com/resources
How to leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 22: Four Things To Know Before you Buy a CNC Router Jan 09, 2016

CNC Router Tips Podcast Episode 22
Four Things You Should know before you Buy a CNC Router.
In this episode we discuss the four things you should know before buying a CNC Router. We discuss the basic subsystems of all CNC machines and how the work together to make what you want. We also discuss the three types of software needed to operate a CNC Router and more.
Special shout out to all our listeners from Brazil!
Websites Mentioned
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.com
http://cncroutertips.com/resources
http://camaster.com
http://shopbottools.com
http://rockler.com
http://stepcraft.us
http://zentoolworks.com
http://carveright.com
http://sears.com
http://inventables.com
http://www.probotix.com/
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 21: CNC Router Table Safety Tips. Dec 23, 2015

CNC Router Tips Podcast Episode 21
CNC ROUTER SAFETY TIPS.
In this episode we discuss some basic safety considerations for new CNC Router Table Owners. Some basic safety equipment evry one should have in their shop. What materials can you safely cut and which one should you avoid?
Websites Mentioned
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.
http://cncroutertips.com/resources
http://ridgid.com
http://oneida-air.com
http://howardleight.com
Protective Gear
Howard Leigh Sync Earmuffs http://amzn.to/1OoHsWa
Central Machinery Dust Collection System http://amzn.to/1OoHHAq
Shop Glasses http://amzn.to/1mB5Gjx.
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 20: How to use Toolpath Templates Dec 12, 2015

CNC Router Tips Podcast Episode 20
HOW TO USE TOOLPATH TEMPLATES
Question: Steve asks: I have a VCarve Pro question. I’ve created a design and I am happy with the carved results. Now I would like to mass produce them. Is it possible to nest a group of toolpaths or copy and move them as I would do with vectors to save time?
Episode 20: https://cncroutertips.com/20
Websites Mentioned
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.
http://cncroutertips.com/resources
http://support.vectric.com/tutorials/V8/TPTemplates/TPTemplates_PRO.html
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 19: How to Merge Toolpaths Dec 05, 2015

In this episode Chad asks: "I am new to VCarve Pro 8. I made a simple project with a few different elements and a different tool paths , but they all use the same bit. I’m wondering is there a way to save all the different tool paths as one file so that I can upload it to my controller just once instead of doing each one individually.
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.
http://cncroutertips.com/resources
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 18: How He Raised $510,497 With CNC Router Business Nov 28, 2015

In this episode we talk with Erick Royer of Stepcraft.US about how he raised $510,497 with a CNC Router Table in 30 days with Kickstarter. Erick launched a new version of his companies CNC Router Table on Kickstarter Crowdfunding website and successfully funded and produced the Stepcraft 2 Universal Desktop CNC Solution.
This is part of a series of interviews with people who have created CNC Startup businesses.
Erick Royer Contact Info:Twitter - @erickroyer, Email - info@stepcraft.us
website: http://Stepcraft.us
Stepcraft Crafters Club – Facebook group
Donek drag knife - http://donektools.com
Probotix CNC machines http://www.probotix.com/
3D Printer http://Makerbot.com
http://kickstarter.com – Crowd Funding website
http://neatfair.org Electric Model Aircraft gathering
http://yeausa.org YEA Program – Young Entrepreneur Academy
http://inventionconvention.org Invention Convention
http://flitetest.com Flite Test
Coupon Code: Routertips
http://www.multirotorpodcast.com/ Multirotor podcast
http://vectric.com CNC Software
http://cncroutertips.com/demo
http://joescnc.com
http://themakersguide.
Kickstarter reach 50% of your funding have a 95% chance of reaching the goal.
https://www.kickstarter.com/projects/stepcraft2/stepcraft-2-universal-desktop-cnc-3d-printer-for-e?ref=nav_search
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 17: Rebuilding - Helping - Giving- Receiving Nov 20, 2015

CNC Router Tips Podcast Episode 17
In this episode we talk with Curt Hammond talks about Rebuilding his life. Helping others to achieve their goals. Giving his help to others and how he received more than he gave. When hurricane Katrina destroyed everything he had Curt Hammond rebuilt his life using a CNC router table to start a sign business. This is part of a series of interviews with people who have created CNC Startup businesses.
Curt Hammond Contact: tangsooman@hotmail.com
Websites Mentioned:
http://vectric.com
http://cncroutertips.com/demo
http://joescnc.com
http://themakersguide.
BOOKS Mentioned
Books
The E Myth – Michael Gerber http://amzn.to/1MYkYnT
Tribes: We Need You To Lead Us - Seth Godin http://amzn.to/1MYl7YF
The $100 startup – Chris Guillebeau http://amzn.to/1LpBAUv
The 4-Hour Workweek – Timothy Ferriss http://amzn.to/1LpBFrq
Mastermind CNC Users seminar. Contact: tangsooman@hotmail.com
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 16: Building Their Dream CNC Business Together Nov 13, 2015

CNC Router Tips Podcast Episode 16
In this episode we talk with Johanna & Brian Haack of the Wood Grain Gallery. Johanna and Brian Haack decided to build a CNC Business together someday….. When an injury brought someday sooner than expected, Brian and Johanna chose to bet on themselves and started a custom carving business with a CNC Router Table.
This is part of a series of interviews with people who have created CNC Startup businesses.
Johanna Haack @thewoodgraingal
http://thewoodgraingallery.com
http://etsy.com
http://custommade.com
http://www.nybds.com/#!nybds-and-children-with-autism/cut6 Bird Dogs for Autism
http://vectric.com
http://cncroutertips.com/demo
http://themakersguide.
http://camaster.com
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 15: Making Ends Meet with a CNC Router? Nov 08, 2015

CNC Router Tips Podcast Episode 15
In this episode we talk with Lee Hanes Owner of Hanes Hot Rods. Lee Hanes was a Physical Therapist’s assistant when he suffered a career ending injury that left him unemployed and unemployable. We talk with Lee about how he is using a CNC Router table to build an income to help support his family. This is part of a series of interviews with people who have created
CNC Startup businesses.
LA Hanes on Facebook
http://haneshotrods.com
http://rhino3d.com
http://eofire.com Entrepreneur On Fire Business Podcast – John Lee Dumas
http://joescnc.com Joe’s CNC Router Plans
http://cncroutertips.com/demo
http://themakersguide.com
Book: The $100 Startup Reinvent the way you make a Living, Do What you Love, and Create a New Future. by Chris Guillebeau - http://amzn.to/1WljmKq
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 14: Can You Build A Business With A CNC Router Table? Oct 29, 2015

CNC Router Tips Podcast Episode 14
Question: Jeff asked: Quick question for those with a cnc, are you using it just for hobby or are you actually making money like a business? What things are popular for your business? Any feedback or info you would like to share would be much appreciated. I am trying to determine if I can actually make money at this. Thanks
http://cncroutertips.com/demo
http://smartpassiveincome.com
http://score.org
https://www.uschamber.com/
http://themakersguide.
http://www.subway.com/
Book: The $100 Startup Reinvent the way you make a Living, Do What you Love, and Create a New Future. by Chris Guillebeau - http://amzn.to/1WljmKq
Organizations: SCORE – The Service Corps Of Retired Executives.
SCORE offers the nation's largest, network of free, expert business mentors.
If you're just starting a business, SCORE mentors can provide the practical action plan, education and tools you need to open your doors and establish a customer base. Already own a business? Our volunteer mentors can help identify ways to increase profit, improve employee and customer satisfaction, and achieve work/ life balance.
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 14: Can You Build A Business With A CNC Router Table? Oct 29, 2015

CNCRT 13: Should I get a High Speed Spindle? Oct 17, 2015

CNC Router Tips Podcast Episode 13
Question: Mark Slatem asks: Should I get a 2.2kw High Speed Spindle? I’m thinking of upgrading my spindle. I currently have a 400 watt spindle on a quite powerful DIY machine I’ve made. I’m thinking of getting one of these 2.2 kw Chinese made water cooled high speed spindles. I was wondering if you had some advice on that. Whether I should be going for a spindle that can do a greater range of RPM maybe from like 100 RPM to 24,000 RPM or is it okay to go for these water cooled spindles that only do from 8000 to 24,000 RPM?
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.

CNCRT 12: What Does Vectric CNC Software Do? Oct 10, 2015

CNC Router Tips Podcast episode 12
Question: Marlo Swedzinski Thank you Bill.
I first located you with the “CNC Router Tips Podcast”.
I am not really interested in verbally asking a question, I will either ramble on or I will stutter and stammer too much.
Here is my thought or what I want to know.
For us beginners can you do a software review of the differences between some of the starter software?
What do you get with one that you don’t get with another etc.?
Is one a prerequisite for another? Eg: Do you need Vcarve pro to use CUT3D?
Vectric
Aspire $1995
VCarve Pro $699
VCarve Desktop $349
Cit2D Pro $449
Cut2D Desktop $149
Cut3D $299
PhotoVCARVE $149
http://www.makermasters.com/cnc-sign-projects-design-software
http://cncroutertips.cpom/comparison
http://cncroutertips.com/demo
http://themakersguide.com/vcarve8
http://themakersguide.
How To leave a review on iTunes
Go to this page.
https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2
Click View in iTunes.
Click on ratings and reviews in iTunes
Click the Write a Review button
Leave an honest rating.
Then write a review Just a few words.
Thanks.

CNCRT 11: How to Set Up Constant Velocity Mode in Mach3 Sep 30, 2015

CNC Router Tips Podcast Episode 11:
How To Set Up Constant Velocity Mode in MACH3.
Q: Bill, I got a question about setting your Mach3 acceleration and Velocity setting in Mach3. Should I use Constant Velocity? I also wondered if the A axis and the Y axis settings have to be exactly the same?
Show Sponsor
The Makers Guide http://themakersguide.com
Links mentioned
International Podcast Day. #podcastday
http://cncroutertips.com/
http://cncroutertips.com/podcast
http://www.themakersguide.com/home/tutorials
http://www.themakersguide.com/home/products/mach3
http://cncroutertips.com/resources
http://themakersguide.com
htttp://cncroutertips.com/cncrt09
#podcastday
TERMS
Look ahead
Acceleration
Exact stop
Constant velocity
The lower the acceleration of the machine axis, the greater will be the radius of the rounded corner
How we do it:
In Mach3 you can set the velocity mode to either exact stop or Constant velocity. To do this go to General Configuration Logic the settings tab (page) and look for a button located above the Reset Button which says “Set Steps Per Unit”. Use this button to enter a distance to travel. Measure the actual distance traveled then enter the corrections.
Software:
If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/machdemo

CNCRT10: Building a Business & Family Around CNC Router Tables Sep 17, 2015

CNCRT 10: Emmy award winning Videographer Sean Fairburn talks about building a business and family around CNC Router Tables. We discuss why it is important to share your adventures and trials with your kids and get them involved in every aspect of your project.
http://gamingthrone.com/
https://www.kickstarter.com/
https://www.kickstarter.com/projects/seanfairburn/gaming-throne-comfortable-collaboration-hardware?ref=discovery
Outliers: http://amzn.to/1F4QV0V
Video:
https://d2pq0u4uni88oo.cloudfront.net/projects/1879450/video-550338-h264_high.mp4
http://www.imdb.com/name/nm0265508/

CNCRT 09: How To Set Up Your Stepper Motors The Right Way in MACH3. Sep 08, 2015

CNC Router Tips Podcast Episode 09:
How To Set Up Your Stepper Motors The Right Way in MACH3.
Q: Bill, I got a question about setting your Mach3 acceleration and Velocity setting in Mach3. I also wondered if the A axis and the Y axis settings have to be exactly the same?
Links mentioned
http://cncroutertips.com/
http://www.themakersguide.com/home/tutorials
http://www.themakersguide.com/home/tutorials/membership-module-1-install-mach3/setting-steps-per-unit
http://www.themakersguide.com/home/products/mach3
http://cncroutertips.com/resources
http://themakersguide.com
How we do it:
In Mach3 you need to calibrate the AXIS Steps per Unit. To do this go to the settings tab (page) and look for a button located above the Reset Button which says “Set Steps Per Unit”. Use this button to enter a distance to travel. Measure the actual distance traveled then enter the corrections.
Videos:
Mach3 Tutorial – Setting Steps Per Unit https://www.youtube.com/watch?v=EVrqObwaAF4
Software:
If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/machdemo

CNCRT 08: How to Use an XBox 360 Controller with Mach3 Sep 03, 2015

CNC router tips podcast episode 08:
How To Use an Xbox 360 Controller with MACH3.
Q: I saw you using an Xbox controller in one of your video to operate their CNC. How did you do that? I know some people use it to jog the machine and execute g-codes. I need some help.
Resources:
http://cncroutertips.com/
http://www.cncroutertips.com/xbox360
http://amzn.to/1JJOCjy
http://www.machsupport.com/wp-content/uploads/2013/04/ControllerPluginHowToUse.pdf
http://cncroutertips.com/resources
http://themakersguide.com
How we do it:
We use an Xbox 360 Wireless controller for Windows to operate our CNC Router Table in Mach3. Download the plugin from the Machsupport website and load it into Mach3. Install the included wifi receiver and pair the controller with your computer.
Then we can assign functions to each button and stick on the Xbox360 wireless controller. These functions will allow us to control the CNC Router remotely.
Videos:
Aluminum CNC Router Gantry https://www.youtube.com/watch?v=9cJFjz0R0KE
Software:
If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/home/products/mach3

CNCRT 07: How To Make Two Sided CNC Projects That Actually Line Up. Aug 28, 2015

CNC router tips podcast episode 07:
How To Make Two Sided CNC Projects That Actually Line Up.
Q: Dylan asks: How do you make a two sided project that actually lines up?
http://cncroutertips.com/
http://cncroutertips.com/resources
http://themakersguide.com
How we do it:
We use Dowels aligned along the center line of the part. We drill two alignment holes along the vertical centerline of the part, one on the top and one on the bottom of the line. Next we extend those drilled holes into a sacrificial board clamped to the router table.
Insert dowels into the work piece and down into the sacrificial board. Clamp the work piece down and machine the first side. Flip the part over and use the dowels to align it. Clamp back down and machine the second side.
Videos:
Milling a two sided soap dish: https://www.youtube.com/watch?v=BLD4dFoXC7o
Preview for Two Sided Machining https://www.youtube.com/watch?v=JIZOmDCtoT8
Software:
If you would like to download a demo copy of Vectric Aspire, VCarve Pro or Cut2D, I made a video to show you how to do it, step by step. Go to http://cncroutertips.com/demo

CNCRT 06: How to add Draft to a 3D Model For Molding. Aug 24, 2015

CNC router tips podcast episode 06:
How To Add Draft To A 3D Part For Molding
This is the CNC Router Tips podcast, a show which answers one question from you, the listener about cnc router tables, cnc software, hardware, web hosting and business.
I'll help you get started in your CNC hobby or business and help you CUT THROUGH THE CONFUSION.
Q: Dylan asks: How do you add a taper between two vectors for molding.
http://cncroutertips.com/
http://cncroutertips.com/resources
http://themakersguide.com
How we do it:
Use the Add Draft icon in the Modeling Tab of Vectric Aspire to set the number of degrees of taper.
If you would like to download a demo copy of Vectric Aspire, VCarve Pro or Cut2D, I made a video to show you how to do it, step by step. Go to http://cncroutertips.com/demo.
Dylan will receive a free ebook because his question was answered on the air.
Get information about CNC Router Tables, CNC Software, Business, Web Hosting, Cad, Cam, 3D and machining.

CNCRT 05: Triple Edge Finder Touch Off Plate Aug 20, 2015

In this episode Phil asks: How do use the Triple Edge Finder to set XY&Z. How would it benefit me?
http://themakersguide.com
How we used to do it.
How we do it now.
Top.
Bottom
Side
If you would like to get a Triple Edge finder go to http://themakersguide.com
Videos:
Using tapered Bits- CNC Touch Off
https://youtu.be/7W-d5fH9XrQ
Using The Makers Guide Triple Edge Finder
https://youtu.be/dhmfnea0vVA
CNC Edge Finding with The Makers Guide Triple Edge Finder
https://youtu.be/wi87xAkoEj0
Jeff Mueller Feb 15, 2014
https://youtu.be/XE4cI7IoSd8

CNCRT 04: Air Cutting and how to avoid it. Aug 14, 2015

Dan May asks: When cutting a pocket cut how do you get the second tool bit to start cutting at the same depth as the first tool left off without cutting air.
Steps
Create a new file
Define the job setup (material size, datum, units).
Create text
Create vectors
Adjust alignment
Choose toolpath types to use.
Create tool paths.
Choose post processor
Convert tool paths to Gcode
Save the files.
Cut the sign
Apply Finish to the sign.
If you would like to download a demo copy of Vectric Aspire, VCarve Pro or Cut2D, I made a video to show you how to do it, step by step.
http://www.cncroutertips.com/demo
http://www.makermasters.com/cnc-sign-project
https://www.youtube.com/watch?v=5JeV_x7DysM
https://youtu.be/5JeV_x7DysM

CNCRT 03: How to make CNC Signs in Cut2D Aug 12, 2015

http://cncroutertips.com In this episode our listener John ask how to make CNC Signs in Vectric Cut2D software. This is a step by step description of the process.

CNCRT 02: Import 3D Models in Aspire Aug 11, 2015

CNC Router Tips Podcast Episode 02:
In this episode our listener Phil asks: How do you import a 3D model in Aspire and change the size to match your material.
Videos:
Import 3D models in Aspire
http://www.cncroutertips.com/3dscale
https://www.youtube.com/watch?v=hz1ZGvQMyvU
Importing Flower Model
http://support.vectric.com/tutorials/V8/Import3D/Import3D_GS.html
How to install Aspire
If you would like to download a demo copy of Vectric Aspire, VCarve Pro or Cut2D, I made a video to show you how to do it, step by step.
http://www.cncroutertips.com/demo
If you have a question for the show you can leave a voice message at http://www.cncroutertips.com/ask-me. Or on speakpipe at
https://www.speakpipe.com/CNCROUTERTIPS

CNCRT 01: Where to Start Aug 08, 2015

Jeff asks Where To Start learning about CNC Router Tables. We provide him a variety of resources and websites to help him cut through the confusion.
Resources mentions in the show.
http://cnczone.com
http://routerforums.com
http://themakersguide.com
http://makermasters.com
http://vectric.com
https://www.youtube.com/user/bgriggstwcny/channels
http://www.cncroutertips.com/start-here/
If you have a question for the show you can leave a voice message at http://www.cncroutertips.com/ask-me/. Or on speakpipe at
https://www.speakpipe.com/CNCROUTERTIPS.

Our TOPPODCAST Picks

Follow Us

Stay Connected

Related Podcasts

Links

Stay Connected